Datasheet C5964-1011, C5964-1010, C5964-0911, C5964-0910, C5964-0901 Datasheet (HAMAMATSU)

IMAGE SENSOR

NMOS multichannel detector head

C5964 series

Incorporates a thermoelectrically-cooled NMOS linear image sensor

C5964 series is a family of multichannel detectors developed for spectrophotometry in the UV to near infrared range (up to 1000 nm). C5964
series device incorporates a thermoelectrically-cooled NMOS linear image sensor (S5930/S5931/S8382/S8383 series), low noise driver/amplifier
circuit and highly stable temperature control circuit. It also operates from simple external signal inputs. The image sensor is cooled to a preset
temperature (Ts=0 ˚C) as soon as the power is turned on. Should the cooler fail and the device overheat, the built-in protection circuit
automatically shut off the power.
The housing is designed for compactness, yet offers good heart dissipation. Furthermore, mounting holes are provided on the front panel of the
housing, permitting easy connection to a monochromator or other instruments

Features

l

Designed for use with a thermoelectrically-cooled NMOS
linear image sensor (S5930 series, etc.)

l

Built-in driver/amplifier and temperature control circuits

l

Highly stable temperature control ensures a constant
cooling temperature of Ts=0 ± 0.05 ˚C (at Ta=10 to 30 ˚C)

l

Operates from simple signal inputs

l

High sensitivity and wide dynamic range

l

Various models are available according to image sensor type

■

Selection guide

C5964 series consists of the following models depending on the NMOS linear image sensor used.

NMOS

multichannel

detector head

C5964-0800 S5930-256S 256
C5964-0900 S5930-512S 512
C5964-0910 S5931-512S 512
C5964-1010 S5931-1024S 1024
C5964-0801 S8382-256S 256
C5964-0901 S8382-512S 512
C5964-0911 S8383-512S 512
C5964-1011 S8383-1024S 1024

Type No. Number of pixels

Applications

l

Multichannel spectrophotometry

l

Spectrophotometer, colorimeter

l

Optical spectrum analyzer

l

Time-resolved photometry

NMOS linear image sensor

Pixel size

[µm (H) × µm (V)]

50 × 2500

25 × 2500

50 × 2500

25 × 2500

Effective active area

[mm (H) × mm (V)]

12.8 × 2.5

25.6 × 2.5

12.8 × 2.5

25.6 × 2.5

12.8 × 2.5

25.6 × 2.5

12.8 × 2.5

25.6 × 2.5

Remark

Standard type

IR-enhanced type

■

Absolute maximum ratings

NMOS multichannel detector head

C5964 series

Parameter Symbol Value Unit

Supply voltage (for digital circuitry) +V
Supply voltage (for analog circuitry) ±V

D

A

Digital input voltage - V

-0.5 to +7 V
±18 V

D

V
Operating temperature Topr +10 to +30 °C
Storage temperature Tstg 0 to +50 °C

Electrical characteristics (Ta=25 °C, V

■

=+5 V, ±VA=±15 V, unless otherwise noted)

D

Parameter Symbol Min. Typ. Max. Unit

Digital input

High level V
Low level V

Master clock (CLK) pulse frequency f

IH

IL

CLK

Video signal readout frequency fv - - f
Master start (start) pulse width tst 1/f

Digital output

Power supply conditions:
Rated voltage

Power supply conditions:
Current consumption

High level (Io= -6 mA) V
Low level (Io=+6 mA) V
Digital +V
Analog ±V
+5 Vdc

*1

+15 Vdc - - - +100 mA

-15 Vdc - - - -100 mA

IH

IL

D

A

---+2.0A

+2.0 - +V

D

V

-0.5 - +0.8 V

- - 375 kHz
/6 Hz

CLK

CLK

- - s

+2.0 - - V

--+0.8V

+4.75 +5.0 +5.25 V
±14.5 ±15.0 ±15.5 V

*1: Including the current consumption of the Peltier element incorporated in the NMOS linear image sensor (S5930 series, etc.)

■

Electrical and optical characteristics (Ta=25 °C, Ts=0 °C, V,=+5 V, ±V)=±15 V, unless otherwise noted)

Parameter Built in sensors Symbol Min. Typ. Max. Unit

Spectral response range

Peak sensitivity wavelength

λ

S5930/S5931 series - 600 ­S8382/S8383 series

p

λ

-

200 to 1000

- 750 -

-nm

nm

S5930 series - 50 -

Saturation output charge

S5931 series - 25 ­S8382 series - 50 ­S8383 series

Qsat

-25-

pC

S5930 series - 0.009 0.03

Dark current

Photo response non-uniformity

*2

S5931 series - 0.004 0.01
S8382 series - 0.009 0.03
S8383 series

I

D

- 0.004 0.01

PRNU - - ±3 %

pA/pixel

S5930 series - 0.2 -

Conversion gain

S5931 series - 0.4 ­S8382 series - 0.2 ­S8383 series

Gc

- 0.4 -

V/pC

*2: Use for A light source. 50 % of saturation, excluding first and last pixels.

NMOS multichannel detector head

C5964 series

■

Temperature controller specifications (Ta=25 °C, V

Parameter

*3

Symbol Min. Typ. Max. Unit

D

=+5 V, ±VA=±15 V, unless otherwise noted)

Cooling temperature Ts -1 0 +1 °C
Temperature control range

Ts

∆

-0.05 - +0.05 °C
Power dissipation of Peltier element Pp - - 7 W
Cool down time to preset temperature to - - 5 minute
Setting temperature for overheart protection To +40 - - °C
*3: Other functions include error display, automatic power off, and detection of electrical opens and shorts by the thermosensor.

■ Spectral response

0.5

IR-ENHANCED TYPES

0.4

0.3

0.2

0.1

PHOTO SENSITIVITY (A/W)

(Measurement example, Ta=25 ˚C)

STANDARD TYPES

0

600500300 400200

700 800 900 11001000 1200

WAVELENGTH (nm)

KMPDB0159EA

■ Block diagram of NMOS linear image sensor (S5930 series, etc.)

START st
CLOCK
CLOCK12

ACTIVE
PHOTODIODE

SATURATION CONTROL
GATE
SATURATION CONTROL
DRAIN

DIGITAL SHIFT REGISTER
(MOS SHIFT REGISTER)

END OF SCAN

ACTIVE VIDEO

Vss

DUMMY VIDEO

DUMMY DIODES

KMPDC0020EA

■ Block diagram (C5964 series)

NMOS multichannel detector head

C5964 series

P+
P-

TH. C *1

THEMOELECTRIC COOLWER

START

CLK1
CLK2

END

VDD (D)
GND (D)
GND (A)

VIDEO

NMOS
LINEAR IMAGE SENSOR
S5930 SERIES, etc.

*1: Thermistor incorporated in the image sensor. Used for temperature monitoring of the image sensor.
*2: Thermistor mounted on the heatsink fins. Used for temperature monitoring of the heat radiating side.

+5 V

+15 V

INTEGRATION
AMPLIFIER

TEMPERATURE
CONTOROLLER

BUFFER

+15 V

TH. H *2

TIMING
SIGNAL

GAIN
AMPLIFIER

CONTROLLER

+5 V , VDD (D)

LED

LOWPASS
FILTER

+15 V

-15 V

BURRER

+5 V
D. GND

+15 V
A. GND

-15 V

CLK
START

TRIGGER

EOS

DATA VIDEO

KACCC0067EA

■ Pulse timing chart

CLK
START

ST

CLK1/RESET

CLK2

RESET

CLK2/CLAMP

TRIGGER

DATA VIDEO
EOS

KACCC0068EA

NMOS multichannel detector head

■

Pin connection

PIN No. Symbol Description

1 NC No connection.
2 Data video Analog video output signal. Positive polarity.
3V
4 V
5V

6 Start

7CLK

8 EOS

9 A. GND Analog ground.
10 A. GND Analog ground.
11 NC No connection.

12 D. GND (P-)

13 D. GND Digital ground.
14 D. GND Digital ground.

15 Trigger

(+15 V) Power supply for analog circuitry.

A1+

(-15 V) Power supply for analog circuitry.

A1-

(+5 V, P+) Power supply for digital circuitry. For the thermoelectric cooler in the NMOS linear image sensor.

D

Digital input signal to initialize the circuit.
HCMOS compatible. Positive logic.
The start pulse interval determines the signal storage time of the sensor.
Digital input signal to specify the circuit operation.
HCMOS compatible. Operates at the rising edge.
Digital output signal to indicate the end of scan of the NMOS linear image sensor.
HCMOS compatible. Negative logic.

Digital ground. Power supply return of the thermoelectric cooler mounted in the NMOS linear
image sensor.

Digital output signal for A/D conversion.
HCMOS compatible. Positive logic.

C5964 series

131415

15-pin D-sub connector (socket type)

■ Dimensional outline (unit: mm)

49.0

40.0

×

)

M3

(4
DEPTH 9

80.0

94.0

2345678

1

9101112

FOCAL LENGTH 7.0 ± 0.5

KACCC0069EA

115

KACCA0053EA

NMOS multichannel detector head

C5964 series

■ Peripheral equipment for multichannel detectors

Hamamatsu provides a variety of peripheral equipment for NMOS multichannel detectors to facilitate high-precision measurement

using computers. They include a data processing unit, and various interconnection cables. The figure below shows an example

of connections to perihperal equipment, using a PC/AT compatible machine.

OSCILLOSCOPE

SIGNAL CABLE
A3020 (1.5 m, 2 CABLES)
(WITH CONNECTORS
AT BOTH ENDS)

CABLE FOR IMAGE SENSOR
(WITH CONNECTORS
AT BOTH ENDS)
A3017 (0.5 m)

C5964 SERIES

POWER CABLE
(WITH CONNECTORS
AT BOTH ENDS)
A3018 (1.5 m)

HAM

AM

ATS

U

DATA PROCESSING UNIT C6536

POWER SUPPLY (+5 V, ±15 V)
C2892

(5 m)

A7094

(2.5 m)

A7094-01

INTERFACE BOARD
FOR IMAGE SENSOR
M7089

PC/AT
COMPATIBLE
MACHINE

Data processing unit C6536

●

C6536 data processing unit converts video signals from an NMOS
linear image sensor into 12 bit digital signals. C6536 consists of a
driving an image sensor. The signals from the NMOS linear image
sensor are converted into digital signals at high-speed and buffered
in the internal memory. By hand shaking between the internal
controller and the external computer, data can be transferred in
parallel according to the computer's speed.

● Interface board M7089

M7089 interface board is an I/O board designed for IBM PC/AT
compatible computers with an ISA bus slot. By inserting M7089 into
the internal ISA slot of an IBM PC/AT compatible computer, data can
be transferred between C6536 data processing unit and the PC.
This allows analyzing the output signal from an NMOS linear image
sensor on the PC or controlling the signal integration time of the
NMOS linear image sensor from the PC.

● Power supply

This power supply provides an NMOS linear image sensor and a
C6536 data processiong unit with the necessary power of +5 V and
±15 V.

● Interconnection cables

Various interconnection cables are provided for connecting a
multichannel
detector to peripheral units.

■ Handling precautions

C5964 series is a precision device, so use sufficient caution when handling it.

● Never disassemble or modify the device as this may cause an operating failure.

● Protect the device from shocks such as drops or impacts as these may cause breakage.

● Avoid storing the device in high temperature and high humidity locations for long periods of time.

● Never block the air vents provided on the top and side panels of this unit during operation. Blocking the air vents may cause

overheating.

● When connecting to other equipment, check that the electrical specifications are matched.

● Never exceed the maximum ratings during operation.

Observe the following precautions to obtain the fullest performance of device.

● Provide a proper shield to protect the device against external electromagnetic effects.
Use of a shield cable is recommended.

● Use a power supply with minimum ripple and noise.

● Pay attention to prevent extraneous light from entering the device for accurate measurements.

Information furnished by HAMAMATSU is believed to be reliable. However, no responsibility is assumed for possible inaccuracies or omissions.

HAMAMATSU PHOTONICS K.K., Solid State Division
1126-1 Ichino-cho, Hamamatsu City, 435-8558 Japan, Telephone: [phone], Fax: [phone], http://www.hamamatsu.com

U.S.A.: Hamamatsu Corporation: 360 Foothill Road, P.O.Box 6910, Bridgewater, N.J. 08807-0910, U.S.A., Telephone: [phone], Fax: [phone]
Germany: Hamamatsu Photonics Deutschland GmbH: Arzbergerstr. 10, D-82211 Herrsching am Ammersee, Germany, Telephone: [phone], Fax: [phone]
France: Hamamatsu Photonics France S.A.R.L.: 8, Rue du Saule Trapu, Parc du Moulin de Massy, 91882 Massy Cedex, France, Telephone: [phone], Fax: [phone]
United Kingdom: Hamamatsu Photonics UK Limited: 2 Howard Court, 10 Tewin Road, Welwyn Garden City, Hertfordshire AL7 1BW, United Kingdom, Telephone: [phone], Fax: [phone]
North Europe: Hamamatsu Photonics Norden AB: Smidesvägen 12, SE-171 41 Solna, Sweden, Telephone: [phone], Fax: [phone]
Italy: Hamamatsu Photonics Italia S.R.L.: Strada della Moia, 1/E, 20020 Arese, (Milano), Italy, Telephone: [phone], Fax: [phone]

Specifications are subject to change without notice. No patent rights are granted to any of the circuits described herein. ©2001 Hamamatsu Photonics K.K.

KACCC0070EA

Cat. No. KACC1018E02
Feb. 2001 DN