Page 1
G
Rocker
7000 Series
Miniature Rocker & Lever Handle Switches
Features/Benefits
•
Multi-pole and multi-position
•
Wide variety of actuator and
termination options
•
Epoxy terminal-seal compatible
Typical Applications
•
Telecommunications
•
Instrumentation
•
Medical equipment
with bottom wash cleaning
•
RoHS compliant
Specifications
CONTACT RATING: B contact material: 0.4 VA max. @ 20 V AC or
DC max. Q contact material: 5 AMPS @ 120 V AC or 28 V DC;
2 AMPS @ 250 V AC. See page G-21 for additional ratings.
ELECTRICAL LIFE: 7X01 and UX1 models: 100,000 make-and-break
cycles at full load. All other models: 40,000 cycles.
CONTACT RESISTANCE: Below 10 m Ω typ. initial @ 2-4
V DC, 100 mA, for both silver and gold plated contacts.
INSULATION RESISTANCE: 109Ω min.
DIELECTRIC STRENGTH: 1000 Vrms min. @ sea level.
OPERATING TEMPERATURE: –30ºC to 85ºC.
SOLDERABILITY: Per MIL-STD-202F method 208D, or
EIA RS-186E method 9 (1 hour steam aging).
NOTE: Any models supplied with S, P, R, Q, B or G contact material are RoHS compliant.
NOTE: Specifications and materials listed above are for switches with standard options.
For information on specific and custom switches, consult Customer Service Center.
Materials
CASE: Glass filled nylon 6/6, flame retardant, heat stabilized, or
diallyl phthalate (DAP) (UL 94V-0).
ACTUATOR: Nylon, black.
FRAME (FRONT MOUNT): Nylon, black.
FRAME (REAR MOUNT): Spring steel, black.
BUSHING: Brass or zinc, nickel plated.
HOUSING: Stainless steel.
SWITCH SUPPORT: Brass or steel, matte-tin plated.
END CONTACTS: B contact material: Copper alloy, with gold plate over
nickel plate. Q contact material: Coin silver, silver plated. See page
G-21 for additional contact materials.
CENTER CONTACTS & ALL TERMINALS: B contact material: Copper
alloy, with gold plate over nickel plate. Q contact material: Copper
alloy, silver plated. See page G-21 for additional contact materials.
TERMINAL SEAL: Epoxy. Refer to Soldering and Cleaning in Technical
Data Section
HARDWARE: Mounting nuts & screws: Brass. Lockwasher: Stainless
steel. Standoff: Nylon standard.
Build-A-Switch
To order, simply select desired option from each category and place in the appropriate box. Available options are shown and
described on pages G-5 through G-25 . For additional options not shown in catalog, consult Customer Service Center. All models
have epoxy terminal seal and are compatible with all “bottom-wash” PCB cleaning methods.
Switch Function
SP On-None-On
7101
7103 SP On-Off-On
7105 SP Mom.-Off-Mom.
7107 SP On-Off-Mom.
7108 SP On-None-Mom.
7109 SP None-On-Mom.
7201 DP On-None-On
7203 DP On-Off-On
7205 DP Mom.-Off-Mom.
7207 DP On-Off-Mom.
7208 DP On-None-Mom.
7211 DP On-On-On
7213 DP On-On-Mom.
7215 DP Mom.-On-Mom.
7301 3P On-None-On
7303 3P On-Off-On
7401 4P On-None-On
7405 4P Mom.-Off-Mom.
7411 4P On-On-On
Note: UL models
available, see pages H-5
and H-6.
Actuator
J1
.531 long rocker
J2 Lever
J3 .906" long rocker
J8 .699" long rocker
J10 1.318" long rocker
J11 Rocker with frame
J15 Rocker
J16 Rocker with frame, snap-in
J19 Rocker with frame
J21 Lever with frame
J25 Lever
J26 Lever with frame, snap-in
J37 Rocker with frame
J50 Rocker
J51 Rocker with frame
J52 Rocker with frame for
J60 Lever
J61 Lever with frame,
J62 Lever with frame for
J90 Lever
J91 Lever with frame, snap-in
, snap-in
sna
,
LED, snap-in
LED, snap-in
p-in
sna
p-in
Terminations
Right angle, PC thru-hole
A
ertical right angle,
AV2V
C PC Thru-hole
Z Solder lug
A3 Right angle,
AV3 Vertical right angle,
sna
AW3Right angle,
V2 .555" high, V-bracket
V3 .460" high, V-bracket
V4 .630" high, V-bracket
V5 Vertical right angle, PC thru-hole
V6 .460" high,
V7 .630" high, V-bracket
V8 .953" high,
V9 1.150" high,
V31 .460" high, V-bracket, snap-in
V51 Vertical right angle, snap-in
V61 .460" high,
W .750" long,
W3 .425" long, wire wrap
W5 1.305" long,wire wrap
Z3 Quick connect
p-in, PC thru-hole
G–
PC thru-hole
PC thru-hole
p-in,
sna
extended, PC thru-hole
-bracket
V
V-bracket
-bracket
V
V-bracket, snap-in
p
wire wra
4
Contact Material
Gold
B
P Gold, matte tin
Q Silver
S Silver, matte-tin
G Gold over silver
R Gold over silver, matte-tin
Seal
Epoxy
E
I Epoxy potted base
Actuator Color
Black
2
1 White
3 Red
Specifications and dimensions subject to change
Frame Color
2
NONE No frame color required
1 White
Metal Frame Color
(J11, J19, J21 &
J37 Actuators)
2 Black
1 White
Dimensions are shown: Inches (mm)
www.ck-components.com
Black
Page 2
G
Rocker
Miniature Rocker & Lever Handle Switches
SWITCH FUNCTION
7000 Series
NO.
POLES
MODEL NO.
7101
7103
7105
SP
7107
7108
7109
SPDT
Part number shown: 7101J1ZQE2
7201
7203
7205
7207
DP
7208
7211*
7213*
7215*
UL**
MODEL
NO.
U11
U13
U15
U17
U18
U19
U21
U23
U25
U27
U28
U211*
U213*
U215*
SWITCH FUNCTION
POS. 1 POS. 2 POS. 3
ON NONE ON
ON OFF ON
MOM.
ON OFF MOM.
ON NONE MOM.
NONE
ON NONE ON
ON
MOM. OFF MOM.
ON OFF MOM.
ON NONE MOM.
ON ON ON
ON ON MOM.
MOM. ON MOM.
OFF MOM.
ON MOM.
OFF ON
CONNECTED TERMINALS
POS. 1 POS. 2 POS. 3
C&K marking on opposite sideC&K marking on opposite side
N/A
2-3
N/A
2-3,5-6
OPEN
N/A
2-3
Terminal Nos.
For Reference Only
N/A
OPEN
N/A
2-3,5-4
2-1
2-1
2-1,5-4
SCHEMATIC
SPDT
DPDT
DPDT
Terminal Nos.
Part number shown: 7201J1ZQE2
** U11 through U413 model nos. with all options when ordered with G, Q, R or S contact material.
For Reference Only
* Wiring for 3-way switch, see Section N.MOM. = Momentary
Dimensions are shown: Inches (mm)
www.ck-components.com
G–
Specifications and dimensions subject to change
5
Page 3
7000 Series
G
Rocker
Miniature Rocker & Lever Handle Switches
SWITCH FUNCTION
NO.
POLES
MODEL NO.
3P
7301
7303
3PDT
Part number shown: 7301J1ZQE2
UL**
MODEL
NO.
U31
U33
SWITCH FUNCTION
POS. 1 POS. 2 POS. 3
ON
NONE ON
ON OFF ON
CONNECTED TERMINALS
POS. 1 POS. 2 POS. 3
C&K marking on opposite sideC&K marking on opposite side
N/A
2-3,5-6,8-9
OPEN
2-1,5-4,8-7
T
erminal Nos.
For Reference Only
SCHEMATIC
3PDT
7401
4P
7405
7411*
U41
U45
U411*
ON NONE ON
MOM. OFF MOM.
ON ON ON
2-3,5-6,8-9,11-12
2-3,5-4,8-9,11-10
4PDT
Part number shown: 7401J1ZQE2
MOM. = Momentary
** U11 through U411 model nos. with all options when ordered with G, Q, R or S contact material.
N/A
OPEN
2-1,5-4,8-7,11-10
4PDT
Terminal Nos.
ence Only
For Refer
echnical Data section of this
* Wiring for 3-way switch
catalog for RoHS compliant and compatible definitions and
specifications.
: See T
Dimensions are shown: Inches (mm)
www.ck-components.com
G–
Specifications and dimensions subject to change
6
Page 4
DIMPLES
MFG. OPTION
DIMPLES MFG.
OPTION
P
ANEL MOUNTING
J8 Actuator
J3 Actuator
J10 Actuator
J1 & J2 Actuators
J1
G
Rocker
J2
ROCKER
LEVER
Miniature Rocker & Lever Handle Switches
ACTUATOR–PANEL REAR MOUNT
ACTUATOR
7000 Series
ACTUATOR COLOR
OPTION
CODE
2
1
3
Finish: Matte. Other colors, custom actuator
markings and legends available, consult
Customer Service Center
dware: two each—mounting screws,
NOTE: Har
nuts, lockwashers and standoffs for 1/8 inch thick
e supplied standard on all switches with
panel ar
panel mounting brackets. Actuators available
, see page G-22. Hardware is available
separately
echnical Data section of this catalog.
see T
J1, J2, J3, J8 & J10 Actuators available with
C, W-W5, Z or Z3 terminations.
ACTUATOR
BLACK
WHITE
RED
.
COLOR
J3
J8
J10
ROCKER
ROCKER
ROCKER
G–
Specifications and dimensions subject to change
7
Dimensions are shown: Inches (mm)
www.ck-components.com
Page 5
7000 Series
PANEL MOUNTING
J50 Actuator
*
J15, J16, J25 & J26 Actuators
G
Rocker
Miniature Rocker & Lever Handle Switches
ACTUATOR–SNAP-IN FRONT MOUNT
OPTION
CODE
2
1
3
ACTUA
BLACK
WHITE
RED
COLOR
J15
TOR
ROCKER, SNAP-IN
ACTUATOR COLOR
FRAME COLORACTUATOR
OPTION
CODE
2
NONE
1
Finish: Matte. Other colors, custom actuator
markings and legends available, consult
Customer Service Center
NOTE: Actuators & frames available
separately, see pages G-22 and G-25. J15,
J16, J25, J26, J50 & J51 Actuators available
with 71XX, 72XX, U1XX & U2XX models
and C, W-W5, Z and Z3 terminations.
FRAME COLOR
BLACK
No Frame Color
(J15 or J25options)
WHITE
.
No frame color choice required
J16
J25
No frame color choice required
J26
ROCKER WITH FRAME, SNAP-IN
LEVER, SNAP-IN
LEVER WITH FRAME, SNAP-IN
* For J50: Incr
(15,75/15,88) for .091/.125 (2,31/3,18) thk. panels.
ease this dimension to .620/.625
J50
No frame color choice required
ROCKER, SNAP-IN
G–
Specifications and dimensions subject to change
8
Dimensions are shown: Inches (mm)
www.ck-components.com
Page 6
PANEL MOUNTING
J51, J60 & J61 Actuators
*
J52 Actuator
*
J51
G
Rocker
ACTUATOR–SNAP-IN FRONT MOUNT
ROCKER WITH FRAME, SNAP-IN
7000 Series
Miniature Rocker & Lever Handle Switches
ACTUATOR COLOR
FRAME COLORACTUATOR
TOR
OPTION
CODE
2
1
3
ACTUA
BLACK
WHITE
RED
COLOR
J52
LED not included.
For LED information, see page H-24.
J60
ROCKER WITH FRAME FOR LED, SNAP-IN
LEVER, SNAP-IN
OPTION
CODE
2
NONE
1
Finish: Matte. Other colors, custom actuator
markings and legends available, consult Customer
Service Center.
NOTE: Actuators & frames available separately, see
pages G-22 and G-25. J51, J52, J60 & J61 Actuators
available with 71XX, 72XX, U1XX & U2XX models
and C, W-W5, Z and Z3 terminations.
FRAME COLOR
BLACK
No Frame Color
(J15 or J25 options)
WHITE
No frame color choice required
J61
LEVER WITH FRAME, SNAP-IN
G–
For J51, J52: Incr
(15,75/15,88) for .060/.125(1,52/3,18) thk. panels.
Specifications and dimensions subject to change
9
ease this dimension to .620/.625
Dimensions are shown: Inches (mm)
www.ck-components.com
Page 7
G
Rocker
7000 Series
P
ANEL MOUNTING
J90, J91 & J93 Actuators
*
J62 Actuator
*
Miniature Rocker & Lever Handle Switches
ACTUATOR–SNAP-IN FRONT MOUNT
OPTION
CODE
2
1
3
ACTUA
BLACK
WHITE
RED
COLOR
J62
TOR
LEVER WITH FRAME FOR LED, SNAP-IN
ACTUATOR COLOR
FRAME COLORACTUATOR
OPTION
CODE
2
NONE
1
Finish: Matte. Other colors, custom actuator
markings and legends available, consult
Customer Service Center.
NOTE: Actuators & frames available separately,
see pages G-22 and G-25. J62, J90 & J91
Actuators available with 71XX, 72XX, U1XX &
U2XX models and C, W-W5, Z & Z3 terminations.
FRAME COLOR
BLACK
No Frame Color
(J90 options)
WHITE
LED not included.
For LED information, see page H-25.
J90
No frame color choice required.
J91
LEVER, SNAP-IN
LEVER WITH FRAME, SNAP-IN
* For J90: Incr
(15,75/15,88) for .091/.125 (2,31/3,18) thk. panels.
For J91: Increase this dimension to .620/.625
(15,75/15,88) for .060/.125 (1,52/3,18) thk. panels.
ease this dimension to .620/.625
G–
10
Specifications and dimensions subject to change
Dimensions are shown: Inches (mm)
www.ck-components.com
Page 8
7000 Series
.313
(7,95)
PANEL MOUNTING
J11 & J21 Actuators
J19 Actuator
J37 Actuator
G
Rocker
Miniature Rocker & Lever Handle Switches
J11
J19
ROCKER WITH FRAME
ROCKER WITH FRAME
ACTUATOR–REAR MOUNT
FRAME COLORACTUATOR
TOR
OPTION
CODE
2
1
3
OPTION
CODE
2
1
Actuator finish: Matte. Frame finish: Gloss. Other
colors, custom actuator markings and legends
available, consult Customer Service Center.
NOTE: Actuators & frames available separately,
see pages G-22 and G-25. J11, J19, J21 & J37
Actuators available with C, W-W5, Z & Z3
terminations.
ACTUA
COLOR
BLACK
WHITE
RED
FRAME COLOR
BLACK
WHITE
J21
J37
LEVER WITH FRAME
ROCKER WITH FRAME
G–
11
Specifications and dimensions subject to change
Dimensions are shown: Inches (mm)
www.ck-components.com
Page 9
7000 Series
G
Rocker
Miniature Rocker & Lever Handle Switches
ACTUATOR–PC MOUNT
J1
ROCKER
ACTUATOR
ACTUATOR COLOR
OPTION
CODE
2
1
3
Finish: Matte. Other colors, custom actuator
markings and legends available, consult
Customer Service Center.
NOTE: Some permissible actuator/termination
combinations may lack clearance between
actuator and PC boar
cised to accommodate this condition.
exer
Actuators available separately, see page G-22.
J1, J2 & J8 actuators available with A, A3, AV2,
AV3, AW3 & V2 terminations. J3 actuators
available with AV2, AV3 & V2-V61 terminations.
J50 actuators available with A (DP, 3P models
only), A3 (DP, 3P models only), AV2, AV3, AW3
(DP, 3P models only) & V2-V61 terminations.
ACTUATOR
COLOR
BLACK
WHITE
RED
d, and care must be
J2
J3
LEVER
ROCKER
J8
ROCKER
J50
ROCKER
Dimensions are shown: Inches (mm)
www.ck-components.com
G–
Specifications and dimensions subject to change
12
Page 10
Miniature Rocker & Lever Handle Switches
PC MOUNTING
Dim 'A'
G
Ro c k e r
ACTUATOR–PC MOUNT
7000 Series
ACTUATOR COLOR
ACTUATOR
J60
J90
LEVER
LEVER
OPTION
CODE
2
1
3
Finish: Matte. Other colors, custom actuator
markings and legends available, consult
Customer Service Center.
NOTE: Some permissible actuator/termination
combinations may lack clearance between
actuator and PC board, and care must be
exercised to accommodate this condition.
Actuators available separately, see page G-22.
J60 & J90 actuators available with A (DP
models only), A3 (DP, 3P models only), AV2,
AV3, AW3 (DP, 3P models only) & V2-V61
terminations.
ACTUATOR
COLOR
BLACK
WHITE
RED
, 3P
TERMINATIONS
Z
SOLDER LUG
SPDT thru 4PDT
Z3
QUICK CONNECT
Not available with P
Available actuators, see pages G-7 through G-13.
, R or S contact materials.
C
PC THRU-HOLE
SPDT thru 4PDT
W, W3, W5
NOTE: Available actuators, see pages G-7 through G-13.
WIRE WRAP
OPTION
CODE
W
W3
W5
DIM ‘A
.750 (19,05)
.425 (10,80)
1.305 (33,15)
’
SPDT thru 4PDT
Not available with P, R or S contact materials. Available
actuators, see pages G-7 thr
connector available; order part number 530100000,
page G-23.
ough G-13. Mating quick
SPDT thru 4PDT
NOTE: Available actuators, see
pages G-7 through G-13.
13
G–
Specifications and dimensions subject to change
Dimensions are shown: Inches (mm)
www.ck-components.com
Page 11
7000 Series
PC MOUNTING
Actuator Shown In Pos. 1
SECTION A-A
Actuator Shown In Pos. 1
SECTION A-A
.14
(3,6)
PC MOUNTING
G
Rocker
Miniature Rocker & Lever Handle Switches
TERMINATIONS
A
RIGHT ANGLE, PC THRU-HOLE
A3
RIGHT ANGLE, SNAP-IN, PC THRU-HOLE
AW3
RIGHT ANGLE, EXTENDED,
PC THRU-HOLE
7101J1ABE2
Horizontal Actuation
SPDT
Not available with I seal option. Available actuators, see pages G-7 and G-13.
Terminal bend radii and lead-in manufacturing option.
A
RIGHT ANGLE, PC THRU-HOLE
A3
RIGHT ANGLE, SNAP-IN, PC THRU-HOLE
NOTE: PC pattern must clear switch support leg.
7201J1ABE2
Horizontal Actuation
DPDT
Not available with I seal option. A
Terminal bend radii and lead-in manufacturing option.
vailable actuators, see pages G-7 and G-13.
14
G–
Specifications and dimensions subject to change
Dimensions are shown: Inches (mm)
www.ck-components.com
Page 12
Actuator Shown In Pos. 1
SECTION A-A
PC
MOUNTING
Actuator Shown In Pos. 1
SECTION A-A
PC MOUNTING
A
G
Ro c k e r
RIGHT ANGLE, PC THRU-HOLE
7301J1ABE2
Horizontal Actuation
3PDT
7000 Series
Miniature Rocker & Lever Handle Switches
TERMINATIONS
Not available with I seal option. Available actuators, see pages G-7 and G-13.
Terminal bend radii and lead-in manufacturing option.
AV2
VERTICAL RIGHT ANGLE, PC THRU-HOLE,
.150" PITCH
7101J1A
V2BE2
Vertical Actuation
SPDT
AV3
VERTICAL RIGHT ANGLE, SNAP-IN, PC THRU-HOLE,
.150" PITCH
Not available with I seal option. Available actuators, see pages G-7 and G-13.
Terminal bend radii and lead-in manufacturing option.
G–
15
Specifications and dimensions subject to change
Dimensions are shown: Inches (mm)
www.ck-components.com
Page 13
7000 Series
Actuator Shown In Pos. 1
SECTION A-A
Actuator Shown In Pos. 1
SECTION A-A
PC MOUNTING
PC MOUNTING
G
Rocker
Miniature Rocker & Lever Handle Switches
TERMINATIONS
V2
A
VERTICAL RIGHT ANGLE, PC THRU-HOLE,
.150" PITCH
AV3
Not available with I seal option. Available actuators, see pages G-7 and G-13.
Terminal bend radii and lead-in manufacturing option.
AV2
TICAL RIGHT ANGLE, SNAP-IN, PC THRU-HOLE,
VER
.150" PITCH
VERTICAL RIGHT ANGLE, PC THRU-HOLE,
.150" PITCH
7201J1A
V2BE2
Vertical Actuation
DPDT
AV3
Not available with I seal option. Available actuators, see pages G-7 and G-13.
Terminal bend radii and lead-in manufacturing option.
VERTICAL RIGHT ANGLE, SNAP-IN, PC THRU-HOLE,
.150" PITCH
16
G–
7301J1AV2BE2
Vertical Actuation
3PDT
Specifications and dimensions subject to change
Dimensions are shown: Inches (mm)
www.ck-components.com
Page 14
Actuator Shown In Pos. 1
SECTION A-A
PC MOUNTING
PC MOUNTING
Actuator Shown In Pos. 1
SECTION A-A
V2
G
Ro c k e r
A
VERTICAL RIGHT ANGLE, PC THRU-HOLE,
.150" PITCH
7401J1AV2BE2
Vertical Actuation
4PDT
7000 Series
Miniature Rocker & Lever Handle Switches
TERMINATIONS
AV3
Not available with I seal option. Available actuators, see pages G-7 and G-13.
Terminal bend radii and lead-in manufacturing option.
V5
TICAL RIGHT ANGLE, SNAP-IN, PC THRU-HOLE,
VER
.150" PITCH
VERTICAL RIGHT ANGLE, PC THRU-HOLE,
.150" PITCH
7101J1V5BE2
Vertical Actuation
SPDT
V51
Not available with I seal option. Available actuators, see pages G-7 and G-13.
Terminal bend radii and lead-in manufacturing option.
VERTICAL RIGHT ANGLE, SNAP-IN,
PC THRU-HOLE, .150" PITCH
G–
17
Specifications and dimensions subject to change
Dimensions are shown: Inches (mm)
www.ck-components.com
Page 15
7000 Series
Actuator Shown In Pos. 1
PC MOUNTING
PC MOUNTING
Actuator Shown In Pos. 1 SECTION A-A
G
Rocker
Miniature Rocker & Lever Handle Switches
TERMINATIONS
V5
VERTICAL RIGHT ANGLE, PC THRU-HOLE,
.150" PITCH
7201J1V5BE2
Vertical Actuation
DPDT
V51
Not available with I seal option. Available actuators, see pages G-7 and G-13.
Terminal bend radii and lead-in manufacturing option.
V2, V6, V7, V8
V61
VERTICAL RIGHT ANGLE, SNAP-IN,
PC THRU-HOLE, .150" PITCH
TICAL MOUNT
VER
VERTICAL MOUNT, V-BRACKET, SNAP-IN
, V
-BRACKET
Not available with I seal option.
Available actuators, see pages G-7 and G-13.
G–
18
7101J1__BE2
SPDT
OPTION
CODE
V2, V21
V6, V61
V7
V8
Specifications and dimensions subject to change
Dimensions are shown: Inches (mm)
www.ck-components.com
DIM ‘A
.555 (14,10)
.460 (11,68)
.630 (16,00)
.953 (24,21)
’
Page 16
Miniature Rocker & Lever Handle Switches
Actuator Shown In Pos. 1
SNAP-IN
PC MOUNTING
Actuator Shown In Pos. 1
SNAP-IN
PC MOUNTING
Actuator Shown In Pos. 1
SNAP-IN
PC
MOUNTING
G
Ro c k e r
TERMINATIONS
7000 Series
V2, V6, V7, V8
V21, V61
VERTICAL MOUNT, V-BRACKET
TICAL MOUNT, V-BRACKET, SNAP-IN
VER
7201J1__BE2
DPDT
Not available with I seal option.
Available actuators, see pages G-7 and G-13.
V2, V7, V8
V21
VERTICAL MOUNT, V-BRACKET, SNAP-IN
VERTICAL MOUNT, V-BRACKET
OPTION
CODE
V2, V21
V6, V61
V7
V8
DIM ‘A’
.555 (14,10)
.460 (11,68)
.630 (16,00)
.953 (24,21)
7301J1__BE2
3PDT
Not available with I seal option.
Available actuators, see pages G-7 and G-13.
V2, V7, V8
V21
VERTICAL MOUNT, V-BRACKET, SNAP-IN
VERTICAL MOUNT, V-BRACKET
7401J1__BE2
4PDT
Not available with I seal option.
Available actuators, see pages G-7 and G-13.
G–
19
OPTION
CODE
V2, V21
V7
V8
OPTION
CODE
V2, V21
V7
V8
Specifications and dimensions subject to change
Dimensions are shown: Inches (mm)
DIM ‘A’
.555 (14,10)
.630 (16,00)
.953 (24,21)
DIM ‘A’
.555 (14,10)
.630 (16,00)
.953 (24,21)
www.ck-components.com
Page 17
7000 Series
PC MOUNTING
Actuator Shown In Pos. 1
SNAP-IN
PC
MOUNTING
Actuator Shown In Pos. 1
SNAP-IN
PC MOUNTING
Actuator Shown In Pos. 1
SNAP-IN
G
Rocker
Miniature Rocker & Lever Handle Switches
TERMINATIONS
V3, V4, V9
V31
Not available with I seal option.
A
VERTICAL MOUNT, V-BRACKET, SNAP-IN
vailable actuators, see pages G-7 and G-13.
V3, V4, V9
V31
VERTICAL MOUNT, V-BRACKET, SNAP-IN
VERTICAL MOUNT, V-BRACKET
VERTICAL MOUNT, V-BRACKET
7101J1__BE2
OPTION
CODE
V3, V31
V4
V9
SPDT
DIM ‘A’
.460 (11,68)
.630 (16,00)
1.150 (29,21)
Not available with I seal option.
vailable actuators, see pages G-7 and G-13.
A
V4, V9
Not available with I seal option.
Available actuators, see pages G-7 and G-13.
VERTICAL MOUNT, V-BRACKET
7201J1__BE2
OPTION
CODE
V3, V31
V4
V9
7301J1__BE2
OPTION
CODE
V4
V9
DPDT
DIM ‘A’
.460 (11,68)
.630 (16,00)
1.150 (29,21)
3PDT
DIM ‘A’
.630 (16,00)
1.150 (29,21)
G–
20
Specifications and dimensions subject to change
Dimensions are shown: Inches (mm)
www.ck-components.com
Page 18
Miniature Rocker & Lever Handle Switches
'A'
Actuator Shown In Pos. 1
SNAP-IN
PC
MOUNTING
G
Ro c k e r
TERMINATIONS
7000 Series
V4, V9
VERTICAL MOUNT, V-BRACKET
7401J1__BE2
4PDT
Not available with I seal option.
Available actuators, see pages G-7 and G-13.
OPTION
CODE
B
P
Q
S
G
R
GOLD OVER SILVER
CONTACT MATERIAL
ACT
CONT
MATERIAL
GOLD
SILVER
1
4,5
2,3
TERMINAL
PLATING
GOLD
MATTE-TIN
SILVER
MATTE-TIN
GOLD
MATTE-TIN
1
6
5
6
3
6
LOW LEVEL/
DRY CIRCUIT
POWER
LOW LEVEL/DRY
CIRCUIT OR POWER
OPTION
CODE
V4
V9
RATINGS
0.4 VA MAX. @ 20 V AC OR DC MAX.
5 AMPS @ 120 V AC OR 28 V DC; 2 AMPS @ 250 V AC.
0 4 VA MAX @ 20 V AC OR DC MAX OR 5 AMPS @
120 V AC OR 28 V DC; 2 AMPS @ 250 V AC.
DIM ‘A
.630 (16,00)
1.150 (29,21)
’
* Note: See Technical Data section of this catalog for RoHS compliant and compatible definitions and specifications.
1
CONTACTS & TERMINALS: Copper alloy, with gold plate over nickel plate.
2
END CONTACTS: Coin silver, with gold plate over nickel plate.
3
CENTER CONTACTS & ALL TERMINALS: Copper alloy, with gold plate
over nickel plate.
4
END CONTACTS: Coin silver, silver plated.
5
CENTER CONTACT & ALL TERMINALS: Copper alloy, silver plated.
6
TERMINALS: Copper alloy
, with matte-tin over nickel plate.
U11-U415 model numbers with all options when ordered with
G, Q, S & R contact material.
B contact material standard with all terminations except C, Z & Z3.
Q contact material standard with C, Z & Z3 terminations.
, S & R, contact materials not available with Z & Z3 terminations.
P
NOTE: Any models supplied with Q, B, G S, P & R contact material ar
e RoHS compliant.
SEAL
EPOXY
SEAL
I
EPOXY
E
vailable with C, W through W5, Z & Z3 terminations.
A
POTTED
BASE
NO.
POLES
SP .410 (10,41)
DP
3P
4P .505 (12,83)
DIM ‘A
.440 (11,18)
.505 (12,83)
’
G–
21
Specifications and dimensions subject to change
Dimensions are shown: Inches (mm)
www.ck-components.com
Page 19
7000 Series
TYPICAL ASSEMBL
Y
SCREW
PANEL THICKNESS
STAND-OFF
LOCKW
ASHER
NUT
ST
AND-OFF
LENGTH
G
Rocker
Miniature Rocker & Lever Handle Switches
AVAILABLE HARDWARE
Panel mounting hardware for rocker and lever handle switches is
available separately. Mounting hardware consists of two screws,
two nuts, two standoffs and two lockwashers per switch, and is
available for panel thicknesses of 1/16, 3/32 and 1/8 inch.
See part numbers below.
J1 & J2 actuators
ART NO. PANEL THK. STANDOFF LENGTH
P
761103000 1/8 IN. (3,18) .233 (5,92)
J10 actuators
PART NO. PANEL THK. STANDOFF LENGTH
770703000 1/8 IN. (3,18) .233 (5,92)
J1, J11, J15 & J16 Actuators
J3 actuators
ART NO. PANEL THK. STANDOFF LENGTH
P
770603000 1/8 IN. (3,18) .233 (5,92)
Screws, nuts, lockwashers: Stainless steel. Standoffs: Nylon, standard.
J2, J21, J25 & J26 Actuators
MATERIAL
J3 & J37 Actuators
PART NO.
776A01000
776A02263
776A03000
Material: Nylon
Finish: Matte
J50, J51 & J52 Actuators
PART NO.
775A01000
775A02263
775A03000
Material: Nylon
Finish: Matte
WHITE
BLACK
RED
WHITE
BLACK
RED
PART NO.
426D01000
426D02263
426D03000
Material: Nylon
Finish: Matte
J60, J61 & J62 Actuators
PART NO.
598101000
613802263
598103000
Material: Nylon
Finish: Matte
WHITE
BLACK
RED
WHITE
BLACK
RED
G–
22
PART NO.
431D01000
431D02263
431D03000
Material: Nylon
Finish: Matte
J8 Actuator
PART NO.
488701000
488702263
488703000
Material: Nylon
Finish: Matte
WHITE
BLACK
RED
WHITE
BLACK
RED
Specifications and dimensions subject to change
Dimensions are shown: Inches (mm)
www.ck-components.com
Page 20
7000 Series
G
Ro c k e r
Miniature Rocker & Lever Handle Switches
AVAILABLE HARDWARE
J90 & J91 Actuators
PART NO.
598001000
598002263
598003000
Material: Nylon
Finish: Matte
Frame for J11 & J21 Actuators
WHITE
BLACK
RED
J10 & J19 Actuators
PART NO.
769501000
769502263
769503000
Material: Nylon
Finish: Matte
Frame for J16 & J26 Actuators
WHITE
BLACK
RED
Fits Z3 Termination
female connector
PART NO.
530100000
Available in loose pieces.
Frame for J51, J61 & J91 Actuators
T NO.
PAR
764500746
764500747
764601106
Material: Spring Steel
Frame for J19 Actuator
PART NO.
781000746
781000747
Material: Spring Steel
BLACK ENAMEL
WHITE ENAMEL
RETAINING SPRING
BLACK ENAMEL
WHITE ENAMEL
PART NO.
459101000
459102000
459103000
Material: Nylon
Finish: Matte
Frame for J37 Actuator
PART NO.
445400746
445400747
Material: Spring Steel
WHITE
BLACK
RED
BLACK ENAMEL
WHITE ENAMEL
G–
23
PART NO.
615601000
615602263
615603000
Material: Nylon
Finish: Matte
Frame for J52 & J62 Actuators
AR
P
613301000
613302263
613303000
Material: Nylon
Finish: Matte
WHITE
BLACK
RED
T NO.
WHITE
BLACK
RED
Specifications and dimensions subject to change
Dimensions are shown: Inches (mm)
www.ck-components.com
Page 21
7000 Series
.495 – .505
(12,57 – 12,83)
.797 – .803
(20,24 – 20,40)
.005 R. MAX.
(0,13) TYP.
.495 – .505
(12,57 – 12,83)
.595 – .605
(15,11 – 15,37)
.005 R.
(0,13)
MAX. TYP.
.495 – .505
(12,57 – 12,83)
.620 – .625
(15,75 – 15,88)
.005 R.
(0,13)
MAX. TYP.
PANEL MOUNTING
For part numbers
4529xxxxx, 4527xxxxx,
4528xxxxx, 4526xxxxx
For part numbers
4325xxxxx, 4326xxxxx
For part numbers
4327xxxxx, 4328xxxxx
TYPICAL
APPLICATION
G
Rocker
Miniature Rocker & Lever Handle Switches
AVAILABLE HARDWARE
Frames snap into panel opening and are independent from switch mounting. Accurate positioning of the
PC mounted switch relative to the panel opening is necessary to provide proper clearance between actuator
and frame. Available in two basic styles and four panel thicknesses .047-.125 in. Material: Nylon. Finish: Matte.
J1 & J2 Actuators
J50, J60 & J90 Actuators
.047” (1,19) P
PART NO.
ANEL THK.
452902263
.047” (1,19) PANEL THK.
PART NO.
432502263
.062” (1,57) P
PART NO.
ANEL THK.
452702263
.062” (1,57) PANEL THK.
PART NO.
432602263
.090” (2,29) P
PART NO.
ANEL THK.
452802263
.090” (2,29) PANEL THK.
PART NO.
432702263
.125” (3,18) P
PART NO.
452602263
.125” (3,18) PANEL THK.
PART NO.
432802263
ANEL THK.
BLACK
BLACK
G–
24
Specifications and dimensions subject to change
Dimensions are shown: Inches (mm)
www.ck-components.com
Page 22
G
Rocker
.030
(0,76)
.200 DIA.
(5,08
˘)
.025 SQ.
TYP
. (0,63)
.750
(19,05)
.340
(8,64)
.230 DIA.
(5,84˘)
Flat denotes
cathode.
Panel Inserts
7000 Series
Miniature Rocker & Lever Handle Switches
AVAILABLE HARDWARE
Will fit Separate Snap-in frames for
J50, J60 & J90 actuators
Above frames (part nos. 432XXXXXX) ar
indicator light assembly. Order insert separately from frame. Blank insert panel (without hole
for LED) also available.
NOTE: Special colors, custom markings available, consult Customer Service Center.
LED not included.
PANEL INSERT
WITH
P
ART NO.
894902000
LED INFORMATION
Process Information: Soldering to LED leads must be completed within 5 seconds at
500º F (260ºC) maximum.
LEDs are not supplied with J52, J62 options. LED snaps into switch frame surrounding
actuator and is wired externally.
e also available with insert which accepts LED for
BLANK PANEL INSERT
HOLE FOR LED
WITHOUT
P
476602000
HOLE FOR LED
ART NO.
BLACK
Suggested LED for J52 & J62 options.
Dimensions for reference only.
G–
Specifications and dimensions subject to change
25
Dimensions are shown: Inches (mm)
www.ck-components.com
Loading...