Page 1
7000 Series
F
Toggle
Miniature Toggle Switches
Features/Benefits
•
Multi-pole and multi-position
•
Wide variety of actuator and
termination options
•
Epoxy terminal-seal compatible with
Typical Applications
•
Telecommunications
•
Instrumentation
•
Medical equipment
bottom wash cleaning
•
RoHS compliant models available
Specifications
CONTACT RATING: B contact material: 0.4 VA max. @ 20 V AC or
DC max. Q contact material: 5 AMPS @ 120 V AC or 28 V DC;
2 AMPS @ 250 V AC. See page F-15 for additional ratings.
ELECTRICAL LIFE: 7X01 and UX1 models: 100,000 make-and-break
cycles at full load. All other models: 40,000 cycles.
CONTACT RESISTANCE: Below 10 m Ω typ. initial @ 2-4 V DC,
100 mA, for both silver and gold plated contacts.
INSULATION RESISTANCE: 109 Ω min.
DIELECTRIC STRENGTH: 1000 Vrms min. @ sea level.
OPERATING TEMPERATURE: –30ºC to 85ºC.
SOLDERABILITY: Per MIL-STD-202F method 208D, or EIA RS-186E
method 9 (1 hour steam aging).
For materials see page F-5.
NOTE: Any models supplied with P, S R, Q, B or G contact material are RoHS compliant
and compatible.
NOTE: Specifications listed above are for switches with standard options. For information
on specific and custom switches, consult Customer Service Center.
Build-A-Switch
To order, simply select desired option from each category and place in the appropriate box. Available options are shown and
described on pages F–5 thru F–17. For additional options not shown in catalog, consult our Customer Service Center.
Switch Function
7101 SP On-None-On
7103 SP On-Off-On
7105 SP Mom.-Off-Mom.
7107 SP On-Off-Mom.
7108 SP On-None-Mom.
7109 SP None-On-Mom.
7201 DP On-None-On
7203 DP On-Off-On
7205 DP Mom.-Off-Mom.
7207 DP On-Off-Mom.
7208 DP On-None-Mom.
7211 DP On-On-On
7213 DP On-On-Mom.
7215 DP Mom.-On-Mom.
7301 3P On-None-On
7303 3P On-Off-On
7305 3P Mom.-Off-Mom.
7308 3P On-None-Mom.
7401 4P On-None-On
7403 4P On-Off-On
7405 4P Mom.-Off-Mom.
7408 4P On-None-Mom.
7411 4P On-On-On
7413 4P On-On-Mom.
7415 4P Mom.-On-Mom.
Note: UL models available,
see pages F-4 & F-5.
15 Jan 21
Actuator
M .200” high
P3 Flatted, anti-rotation,
.450” high
S .420” high
T .687” high, 15/32 bushing
K2 Locking lever, .704” high
K9 Locking lever, .704” high
K12 Locking lever, .732” high
K19 Locking lever, .732” high
L .840” high
L1 .640” high
L1P Anti-rotation, .640” high
L2 .550” high
L2P Anti-rotation, .550” high
L3 Plastic .940” inch
L40 Lever handle without cap
L41 .531” high lever handle with cap
L42 .838” high lever handle with cap
MP Anti-rotation, .200” high
P1 Flatted, anti-rotation,
.840” high
P4 Flatted, anti-rotation,
.250” high
SP Anti-rotation, .420” high
T1 .487” high, 15/32 bushing
T1P Anti-rotation, .487” high,
15/32 bushing
T2P Flatted, anti-rotation,
.610” high, 15/32 bushing,
TP Anti-rotation, .687” high,
15/32 bushing
Bushing
D .280 high, keyway
H .296 high, flat
Y .350 high, keyway
NONE No bushing
choice required
CW Splashproof
D8 .280” high, flat
D9 .280” high, keyway
H3 .315” high, keyway
H4 8mm high, keyway
Y1 .378” high, keyway
Y3 8.9mm high, keyway
Y4 .378” high, flat
Y9 .350” high, keyway
Terminations
A Right angle, PC thru-hole
AV2 Vert. right angle, PC thru-hole
C PC Thru-hole
V3 .460 high, V-bracket
Z Solder lug
A2 Right angle, PC thru-hole
A3 Right angle, PC thru-hole
A4 Right angle, PC thru-hole
AW1 Right angle, extended, PC thru-hole
AW4 Right angle, extended, PC thru-hole
V2 .555” high, V-bracket
V4 .630” high, V-bracket
V6 .460” high, V-bracket
V7 .630” high, V-bracket
V8 .953” high, V-bracket
V9 1.150” high, V-bracket
V21 .555” high, snap-in V-bracket
V31 .460” high, snap-in V-bracket
V41 .630” high, snap-in V-bracket
V71 .630” high, snap-in V-bracket
V81 .953” high, snap-in V-bracket
F–3
Contact Material
B Gold
P Gold, matte-tin
Q Silver
S Silver, matte-tin
G Gold over silver
R Gold over silver, matte-tin
Actuator Color/Finish
NONEBright chrome
2 Black
3 Red
S Satin chrome
KXX Actuator Color/Finish
NONENatural aluminum
2 Black anodized aluminum
3 Red anodized aluminum
7 Blue anodized aluminum
G Grip tip aluminum
W .750” long, wire wrap
W1 .964” long, wire wrap
W3 .425” long, wire wrap
W4 1.062” long, wire wrap
W5 1.305” long, wire wrap
Z3 Quick connect
Specifications and dimensions subject to change
Seal
E Epoxy
I Epoxy potted
Bushing Finish
NONE Nickel on all
2 Black
Dimensions are shown: Inches (mm)
base
bushings (except D8,
satin chrome)
www.ckswitches.com
Page 2
F
Toggle
7000 Series
MOM.
*
Miniature Toggle Switches
Materials
CASE: Glass filled nylon 6/6, flame retardant, heat stabilized, or
diallyl phthalate (DAP) (UL 94V-0).
ACTUATOR: Brass, chrome plated.
BUSHING: Brass or zinc, nickel plated.
HOUSING: Stainless steel.
SWITCH SUPPORT: Brass or steel, tin plated.
END CONTACTS: B contact material: Copper alloy, with gold plate
over nickel plate. Q contact material: Coin silver, silver plated.
See page F-15 for additional contact materials.
SWITCH FUNCTION
CENTER CONTACTS & ALL TERMINALS: B contact material: Copper
alloy, with gold plate over nickel plate. Q contact material: Copper
alloy, silver plated. See above for additional contact materials.
TERMINAL SEAL: Epoxy.
HARDWARE: Nut & Locking Ring: Brass, nickel plated.
Lockwasher: Steel, nickel plated.
NOTE: Materials listed above are for switches with standard options. For information
on specific and custom switches, consult Customer Service Center.
NO.
POLES
MODEL NO.
7101
7103
7105
SP
7107
7108
7109
SPDT
Part number shown: 7101SYZBE
7201
7203
7205
7207
DP
7208
7211 *
7213 *
7215 *
UL**
MODEL
NO.
U11
U13
U15
U17
U18
U19
U21
U23
U25
U27
U28
U211 *
U213 *
U215 *
SWITCH FUNCTION
POS. 1 POS. 2 POS. 3
ON NONEON
ON OFF ON
MOM.OFF MOM.
ON OFF MOM.
ON NONEMOM.
NONE ON MOM.
1/4-40 UNS-2A
KEYWAY
ON NONEON
ON OFF ON
MOM.OFF MOM.
ON OFF MOM.
ON NONEMOM.
ON ON ON
ON ON MOM.
MOM.ONMOM.
CONNECTED TERMINALS
POS. 1 POS. 2 POS. 3
2-3
2-3
2-3
N/A
2-3,5-6
2-3,5-6
2-3,5-6
2-3,5-6
N/A
OPEN
N/A
2-3
Terminal Numbers
For Reference Only
N/A
OPEN
N/A
2-3,5-4
2-1
2-1
2-1
2-1
2-1,5-4
2-1,5-4
2-1,5-4
2-1,5-4
SCHEMATIC
SPDT
DPDT
DPDT
Part number shown: 7201SYZQE
= Momentary
** Wiring for 3-way switch
Wiring for 3-way switch, see Section N.
15 Jan 21
1/4-40 UNS-2A
KEYWAY
Terminal Numbers
For Reference Only
** U11–U415 model nos. with all options when ordered with G, R, Q or S contact material.
Specifications and dimensions subject to change
F–4
Dimensions are shown: Inches (mm)
www.ckswitches.com
Page 3
SWITCH FUNCTION
4PDT
2-1,5-4,8-7,11-10
2-1,5-4,8-7,11-10
2-1,5-4,8-7,11-10
2-1,5-4,8-7,11-10
N/A
OPEN
N/A
2-3,5-4,8-9,11-10
2-3,5-6,8-9,11-12
2-3,5-6,8-9,11-12
2-3,5-6,8-9,11-12
2-3,5-6,8-9,11-12
ON NONEON
ON OFF ON
MOM. OFF MOM.
ON NONEMOM.
ON ON ON
ON ON MOM.
MOM. ON MOM.
U41
U43
U45
U48
U411*
U413*
U415*
7401
7403
7405
7408
7411*
7413*
7415*
4P
3PDT
2-1,5-4,8-7
2-1,5-4,8-7
2-1,5-4,8-7
N/A
OPEN
N/A
2-3,5-6,8-9
2-3,5-6,8-9
2-3,5-6,8-9
ON NONEON
ON OFF ON
MOM. OFF MOM.
ON OFF MOM.
ON NONEMOM.
U31
U33
U35
U37
U38
7301
7303
7305
7307
7308
3P
SCHEMATIC
CONNECTED TERMINALS
POS. 1 POS. 2 POS. 3
SWITCH FUNCTION
POS. 1 POS. 2 POS. 3
UL**
MODEL
NO.
MODEL NO.
NO.
POLES
4PDT
3PDT
Part number shown: 7301SYZQE
Part number shown: 7401SYZQE
** U11–U415 model nos. with all options when ordered with G, Q, R or S contact material.
1/4-40 UNS-2A
KEYWAY
1/4-40 UNS-2A
KEYWAY
F
Toggle
7000 Series
Miniature Toggle Switches
Terminal Numbers
For Reference Only
** Wiring for 3-way switch
15 Jan 21
Terminal Numbers
For Reference Only
Specifications and dimensions subject to change
F–5
Dimensions are shown: Inches (mm)
www.ckswitches.com
Page 4
F
Toggle
7000 Series
*DIM. ‘A’
*
*
*
*
*
15/32-32 UNS-2A
.487
(12,37)
.448
(11,38)
15/32-32 UNS-2A
15/32-32 UNS-2A
.687
(17,45)
Miniature Toggle Switches
ACTUATOR
S
.4206” HIGH
SP
S actuator standard when ordered with
C, W-W5, Z & Z3 terminations.
Caps are available separately, see page F-16.
1
ANTIROTATION, .4206” HIGH
M
2,3
MP
M actuator standard when ordered with
all terminations except C, W-W5, Z & Z3.
Caps are available separately, see page F-16.
ACTUATOR
.2006” HIGH
1
ANTIROTATION, .2006” HIGH
ACTUATOR FINISH
L, L1, L2
2,3
L1P, L2P
.8406”, .6406”, .5506” HIGH
ANTIROTATION,
.8406”, .6406”, .5506” HIGH
OPTION
CODE DIM ‘A’
L .840 (21,34)
L1, L1P .640 (16,26)
L2, L2P .550 (13,97)
Caps are available separately, see page F-16.
1
2,3
*P1
FLATTED WITH ANTIROTATION, .8406” HIGH
*Dress nut part number 709901201 supplied standard with threaded bushing. (Part number 709903201 with metric threaded bushings.)
T
.687 (17,45)6 HIGH
TP
ANTIROTATION, .687 (17,45) HIGH,
15/32 BUSHING
1,2
1,2,3
2,3
*P3
.4506” HIGH
T1
T1P
FLATTED WITH ANTIROTATION,
.487 (12,37)6 HIGH
ANTIROTATION, .487 (12,37) HIGH,
15/32 BUSHING
2,3
1,2
1,2,3
*P4
FLATTED WITH ANTIROTATION, .2506” HIGH
2,3
T2P
FLATTED, ANTIROTATION, .6106” HIGH,
15/32 BUSHING
1,2,3
Bushing option code not required unless CW splashproof bushing ordered. TP & T1P
actuators not available with CW splashproof bushing. All TXX actuators not available on
single pole models with A-A4, AW1-AW4 terminations.
1
L, L1, L2, M, S & TXX actuators not available
with Y1 bushing.
2
L1P, L2P, MP, P1, P3, P4, SP & TXX actuators
not
available with D8 & H4 bushing.
3
Antirotation: Provides anti-‘push-in’ feature on
actuator.
* Add .070 (1,78) for D, D8 & D9 bushings,
subtract .020 (0,51) for H3 bushing.
15 Jan 21
OPTION
CODE ACTUATOR FINISH
NONE
BRIGHT CHROME-With Nickel Plated Bushing
2
BLACK
S
SATIN CHROME
F–6
Bushing option code not required. T2P actuator not available
with CW splashproof bushing or single pole models with
A-A4, AW1-AW4 terminations.
NOTE: Black hardware is supplied when either
black actuators or bushings are specified. For
additional hardware, see Technical Data.
Specifications and dimensions subject to change
Dimensions are shown: Inches (mm)
www.ckswitches.com
Page 5
F
Toggle
*
Gloss Plastic
Chrome Finish
No color choice required.
Locking Positions
–03 & –11 Models
3 Position lock
–05, –09 & –15 Models
1 Position lock
–07 & –13 Models
2 Position lock
–01 Models
2 Position lock
–08 Models
1 Position loc
k
K2
Replaces K, K8
*
Replaces K1, K18
*
LOCKING LEVER, .704” HIGH
(threaded)
K9
LOCKING LEVER, .704” HIGH
(unthreaded)
ACTUATOR
K12
LOCKING LEVER, .732” HIGH
(threaded)
K19
LOCKING LEVER, .732” HIGH
(unthreaded)
7000 Series
Miniature Toggle Switches
ACTUATOR FINISH/COLOR
ACTUATOR
L40
LEVER HANDLE WITHOUT CAP
L41
PLASTIC LEVER HANDLE WITH
ANTIROTATION AND CAP, P/N 4810
OPTION
CODE
NONE NATURAL ALUMINUM-With Nickle Plated Bushing
2 BLACK ANODIZED ALUMINUM
3 RED ANODIZED ALUMINUM
7 BLUE ANODIZED ALUMINUM
G GRIP TIP ALUMINUM
* All KXX models including KXXCW have a keyway
NOTE: To prevent accidental actuation, toggle must be lifted
before being actuated. When released, toggle will lock in place.
Overtightening mounting nut may cause actuator to bind.
Locking levers supplied with bushing shown.
Bushing option code not required unless CW splashproof
bushing ordered.
L42
Finish: Matte (L41 & L42).
ACTUATOR CAP FINISH
PLASTIC LEVER HANDLE WITH
ANTIROTATION AND CAP, P/N 4811
L3
* Add .070 (1,78) for D, D8 & D9 bushings,
subtract .020 (0,51) for H3 bushing.
PLASTIC .940” HIGH
15 Jan 21
OPTION
CODE
NONE
No Actuator Color (L40 option)
2
BLACK
3
RED
NOTE: Lever handle for L41 & L42 actuators supplied, but not installed. For interchangeability,
order L40 actuator option and lever handles separately, see page F-16. L4X actuators not
available with H4, Y1, Y4 bushings. Antirotation: Provides anti-‘push-in’ feature on actuator.
F–7
PLASTIC ACTUATOR
COLORS
Specifications and dimensions subject to change
Dimensions are shown: Inches (mm)
www.ckswitches.com
Page 6
7000 Series
PANEL MOUNTING
1/4 INCH BUSHING METRIC BUSHING
15/32 INCH BUSHING
Without locking ring. With standard locking ring. With small locking ring. Without locking ring.With locking ring. Without locking ring. With standard locking ring.
15/32-32 UNS-2A
1/4-40 UNS-2A
For T & T1 actuators. For actuators other than T, T1 and KXX.
1/4-40 UNS-2A
D8
D, D9
1/4-40 UNS-2A
1/4-40 UNS-2A
1/4-40 UNS-2A
1/4-40 UNS-2A
1/4-40 UNS-2
A
F
Toggle
Miniature Toggle Switches
BUSHING
Y
.350” HIGH,
THREADED, KEYWAY
Y9
.350” HIGH,
UNTHREADED,
KEYWAY
NONE
No bushing choice required
with KXX, TXX actuators.
(exception: Specify CW if
splashproof bushing desired).
NO BUSHING
D
D8
D9
.280” HIGH,
THREADED, KEYWAY
.280” HIGH, UNTHREADED,
3
FLAT
.280” HIGH, UNTHREADED,
KEYWAY
BUSHING
BUSHING FINISH
H
.296” HIGH, FLAT
THREADED, HIGH TORQUE
H3
1,2
.315” HIGH, KEYWAY
THREADED, HIGH
1,2
TORQUE
Y bushing standard with C,
W-W5, Z or Z3 terminations.
H4
8mm HIGH, KEYWAY, THREADED,
METRIC HIGH TORQUE
CW
THREADED, SPLASHPROOF
IP67 Degree of protection, totally protected against
dust, full-scale voltage protection, temporary immersion.
Internal actuator seal standard.
External bushing seal available separately from
APM Hexseal, part # MFS-60064.
1,2,3
1,2
Y1
D9 bushing standard with all terminations
except C, W-W5, Z or Z3. Add .070 (1,78) to
all actuators lengths with D, D8 & D9 bushings.
.378” HIGH, KEYWAY, THREADED,
HIGH TORQUE
IP67 Degree of protection, totally protected
against dust, full-scale voltage protection,
temporary immersion. Internal actuator seal
and external bushing seal washer standard.
IP65 degree of protection for LXP, MP, PX
or SP with CW option.
1,2,4
Subtract .020 (0,51) from all actuator
lengths for H3 bushing.
Y3
8.9mm HIGH, KEYWAY,
THREADED, METRIC
OPTION
CODE BUSHING FINISH
2 BLACK
1
Will withstand 12 in.-lbs. of torque with no distortion.
2
CW. H, H3, H4, Y1 & Y4 bushings not available on single pole models
with A4 terminations.
3
D8 & H4 bushings available only with L, L1, L2, M & S actuators.
4
Y1 bushing available only with LXP, MP, PX & SP actuators.
5
Y4 bushing not available with L4X actuators.
NOTE: Two mounting nuts, locking ring and lockwasher supplied standard with
threaded bushings. Black hardware is supplied when either black bushings or
actuators are specified. Optional mounting nut and locking ring styles and finishes
available.
NICKEL on all bushings
NONE
Y4
.378” HIGH, FLAT, THREADED,
HIGH TORQUE
except ‘D8’ satin chrome.
1,2,5
15 Jan 21
F–8
Specifications and dimensions subject to change
Dimensions are shown: Inches (mm)
www.ckswitches.com
Page 7
F
Toggle
Switch support with CW, H, H3, H4, Y1, Y4
bushings and KXX actuators.
Terminal Nos.
For Reference Only
Actuator Shown
In Pos. 1
SECTION A-A
Dim 'A'
PC MOUNTING
PC MOUNTING
Dim 'A'
.030 (0,76) Thk.
.030 (0,76) Thk.
.030 (0,76) Thk.
Z
SOLDER LUG
TERMINATIONS
7000 Series
Miniature Toggle Switches
C
PC THRU-HOLE
SPDT thru 4PDT
Z3
QUICK CONNECT
SPDT thru 4PDT SPDT thru 4PDT
A
RIGHT ANGLE, PC THRU-HOLE
Not available with P, R or S contact materials.
Not available with P, R or S contact materials.
Mating quick connector available, order part
number 530100000, page F-16.
SPDT thru 4PDT
W, W1, W3, W4, W5
WIRE WRAP
W
W1
W3
W4
W5
OPTION
CODE DIM ‘A’
.750 (19,05)
.964 (24,48)
.425 (10,80)
1.062 (26,97)
1.305 (33,15)
7101MD9ABE
Horizontal Actuation
SPDT
A3
RIGHT ANGLE, SNAP-IN, PC THRU-HOLE
Not available with I seal option.
Terminal bend radii and lead-in manufacturing option.
15 Jan 21
Part No. Shown: 7101MHABE
AW1, AW4
RIGHT ANGLE, EXTENDED,
PC THRU-HOLE
OPTION
CODE DIM ‘A’
AW1 .72 (18,3)
AW4 .83 (21,1)
F–9
Specifications and dimensions subject to change
Dimensions are shown: Inches (mm)
www.ckswitches.com
Page 8
F
Toggle
7000 Series
Terminals &
Support
Actuator Shown
In Pos. 1
SECTION A-A
Actuator Shown
In Pos. 1
SECTION A-A
Terminals &
Support
.33 (8,4)
DIM 'A'
PC MOUNTING
.18
(4,6)
.33 TYP.
(8,4)
PC MOUNTING
Miniature Toggle Switches
TERMINATIONS
A
RIGHT ANGLE, PC THRU-HOLE
7201MD9ABE
Horizontal Actuation
DPDT
A3
RIGHT ANGLE, SNAP-IN, PC THRU-HOLE
AW1, AW4
RIGHT ANGLE, EXTENDED,
PC THRU-HOLE
OPTION
CODE DIM ‘A’
AW1
AW4
.40 (10,2)
.50 (12,7)
Not available with I seal option.
Terminal bend radii and lead-in manufacturing option.
A
RIGHT ANGLE, PC THRU-HOLE
7301MD9ABE
Horizontal Actuation
3PDT
AW4
RIGHT ANGLE, EXTENDED, PC THRU-HOLE
Not available with I seal option.
Terminal bend radii and lead-in manufacturing option.
15 Jan 21
F–10
Specifications and dimensions subject to change
Dimensions are shown: Inches (mm)
www.ckswitches.com
Page 9
PC MOUNTING
PC MOUNTING
A
ctuator Shown In Pos. 1
Terminals & Support
Switch support with CW, H, H3, H4, Y1, Y4
bushings and KXX actuators.
PC MOUNTING
A
ctuator Shown In Pos. 1
PC MOUNTING
A
ctuator Shown In Pos. 1
SECTION A-A
A2
A
ctuator Shown In Pos. 1
SECTION A-A
F
Toggle
RIGHT ANGLE, PC THRU-HOLE,
.156” PITCH
7000 Series
Miniature Toggle Switches
TERMINATIONS
7101MHA2BE
Horizontal Actuation
SPDT
Not available with TXX actuators and I seal.
Terminal bend radii and lead-in manufacturing option.
A4
RIGHT ANGLE, PC THRU-HOLE
.156” PITCH
Not available with KXX & TXX actuators, CW, H, H3, H4, Y1 & Y4 bushings,
and I seal. Terminal bend radii and lead-in manufacturing option.
AV2
VERTICAL RIGHT ANGLE, PC THRU-HOLE,
.150” PITCH
Not available with I seal option.
Terminal bend radii and lead-in manufacturing option.
Part No. Shown: 7101MHA2BE
7101MD9A4BE
Horizontal Actuation
SPDT
NOTE: The A4 option is available with any contact material and can be UL recognized and
CSA certified. The PC pattern must clear switch support legs.
7101MD9AV2BE
Horizontal Actuation
SPDT
AV2
VERTICAL RIGHT ANGLE, PC THRU-HOLE,
.150” PITCH
Not available with I seal option.
Terminal bend radii and lead-in manufacturing option.
15 Jan 21
F–11
7201MD9AV2BE
Vertical Actuation
DPDT
Specifications and dimensions subject to change
Dimensions are shown: Inches (mm)
www.ckswitches.com
Page 10
F
Toggle
PC MOUNTING
Dim ‘A’
Actuator Shown In Pos. 1
Snap-In
7000 Series
A
ctuator Shown In Pos. 1 SECTION A-A
A
ctuator Shown In Pos. 1 SECTION A-A
PC MOUNTING
PC MOUNTING
Miniature Toggle Switches
TERMINATIONS
AV2
VERTICAL RIGHT ANGLE, PC THRU-HOLE,
.150” PITCH
7301MD9AV2BE
Vertical Actuation
3PDT
Not available with I seal option.
Terminal bend radii and lead-in manufacturing option.
AV2
VERTICAL RIGHT ANGLE, PC THRU-HOLE,
.150” PITCH
7401MD9AV2BE
Vertical Actuation
4PDT
Not available with I seal option.
Terminal bend radii and lead-in manufacturing option.
V2, V6, V7, V8
V21, V71, V81
VERTICAL MOUNT, V-BRACKET
VERTICAL MOUNT, V-BRACKET, SNAP-IN
7101MD9__BE
SPDT
Not available with I seal option.
OPTION
CODE DIM ‘A’
V2, V21
V6
V7, V71
V8, V81
.555 (14,10)
.460 (11,68)
.630 (16,00)
.953 (24,21)
15 Jan 21
F–12
Specifications and dimensions subject to change
Dimensions are shown: Inches (mm)
www.ckswitches.com
Page 11
F
Toggle
Dim ‘A’
Actuator Shown In Pos. 1
Snap-In
PC MOUNTING
TERMINATIONS
PC MOUNTING
Dim ‘A’
Actuator Shown In Pos. 1
Snap-In
PC MOUNTING
Dim ‘A’
Actuator Shown In Pos. 1
Snap-In
7000 Series
Miniature Toggle Switches
V2, V6, V7, V8
VERTICAL MOUNT, V-BRACKET
V21, V61, V71, V81
Not available with I seal option.
V2, V7, V8
V21, V71, V81
VERTICAL MOUNT, V-BRACKET
VERTICAL MOUNT, V-BRACKET, SNAP-IN
VERTICAL MOUNT, V-BRACKET, SNAP-IN
OPTION
CODE DIM ‘A’
V2, V21
V6, V61
V7, V71
V8, V81
.555 (14,10)
.460 (11,68)
.630 (16,00)
.953 (24,21)
7201MD9__BE
DPDT
Not available with I seal option.
V2, V7, V8
VERTICAL MOUNT, V-BRACKET
V21, V71, V81
Not available with I seal option.
15 Jan 21
VERTICAL MOUNT, V-BRACKET, SNAP-IN
F–13
OPTION
CODE DIM ‘A’
V2, V21
V7, V71
V8, V81
OPTION
CODE DIM ‘A’
V2, V21
V7, V71
V8, V81
Specifications and dimensions subject to change
.555 (14,10)
.630 (16,00)
.953 (24,21)
.555 (14,10)
.630 (16,00)
.953 (24,21)
7301MD9__BE
3PDT
7401MD9__BE
4PDT
Dimensions are shown: Inches (mm)
www.ckswitches.com
Page 12
F
Toggle
Dim ‘A’
Actuator Shown In Pos. 1
Snap-In
PC MOUNTING
Dim ‘A’
Actuator Shown In Pos. 1
Snap-In
PC MOUNTING
7000 Series
Dim ‘A’
Actuator Shown In Pos. 1
Snap-In
PC MOUNTING
Miniature Toggle Switches
TERMINATIONS
V3, V4, V9
V31, V41
VERTICAL MOUNT, V-BRACKET
VERTICAL MOUNT, V-BRACKET, SNAP-IN
7101MD9__BE
SPDT
Not available with I seal option.
V3, V4, V9
V31, V41
VERTICAL MOUNT, V-BRACKET
VERTICAL MOUNT, V-BRACKET, SNAP-IN
OPTION
CODE DIM ‘A’
V3, V31
V4, V41
V9
1.150 (29,21)
.460 (11,68)
.630 (16,00)
Not available with I seal option.
V4, V9
V41
Not available with I seal option.
VERTICAL MOUNT, V-BRACKET
VERTICAL MOUNT, V-BRACKET, SNAP-IN
7201MD9__BE
DPDT
OPTION
CODE DIM ‘A’
V3, V31
V4, V41
V9
.460 (11,68)
.630 (16,00)
1.150 (29,21)
7301MD9__BE
3PDT
OPTION
CODE DIM ‘A’
V4, V41 .630 (16,00)
V9 1.150 (29,21)
15 Jan 21
F–14
Specifications and dimensions subject to change
Dimensions are shown: Inches (mm)
www.ckswitches.com
Page 13
F
Toggle
TERMINATIONS
Dim 'A'
Actuator Shown In Pos. 1
Snap-In
PC MOUNTING
7000 Series
Miniature Toggle Switches
V4, V9
V41
Not available with I seal option.
VERTICAL MOUNT, V-BRACKET
VERTICAL MOUNT, V-BRACKET, SNAP-IN
OPTION
CODE
B
P
CONTACT MATERIAL
CONTACT
MATERIAL
1
GOLD
TERMINAL
PLATING RATINGS
1
GOLD
MATTE-TIN
6
LOW LEVEL/
DRY CIRCUIT
OPTION
CODE
DIM ‘A’
V4, V41 .630 (16,00)
V9 1.150 (29,21)
0.4 VA MAX. @ 20 V AC OR DC MAX.
7401MD9__BE
4PDT
Q
SILVER
4,5
S
G
R
* Note: See Technical Data section of this catalog for RoHS compliant and compatible definitions and specifications.
1
CONTACTS & TERMINALS: Copper alloy, with gold plate over nickel plate.
2
END CONTACTS: Coin silver, with gold plate over nickel plate.
3
CENTER CONTACTS & ALL TERMINALS: Copper alloy, with gold plate
over nickel plate.
4
END CONTACTS: Coin silver, silver plated.
5
CENTER CONTACT & ALL TERMINALS: Copper alloy, silver plated.
6
TERMINALS: Copper alloy, with matte tin alloy nickel plate.
15 Jan 21
GOLD OVER
2,3
SILVER
SILVER
MATTE-TIN
GOLD
MATTE-TIN
5
6
3
6
POWER
LOW LEVEL/DRY
CIRCUIT OR POWER
NOTE: Any models supplied with P, S, R, Q, B or G contact material are RoHS compliant.
U11-U415 model numbers with all options when ordered with G,
S, R, or Q contact material.
B contact material standard with all terminations except C, Z & Z3.
Q contact material standard with C, Z & Z3 terminations.
P, S & R contact materials not available with Z & Z3 terminations.
5 AMPS @ 120 V AC OR 28 V DC; 2 AMPS @ 250 V AC.
0.4 VA MAX @ 20 V AC OR DC MAX. OR 5 AMPS @ 120 V AC
OR 28 V DC; 2 AMPS @ 250 V AC.
F–15
Specifications and dimensions subject to change
Dimensions are shown: Inches (mm)
www.ckswitches.com
Page 14
F
Toggle
16 [0.630]
ø 2 [0.079]
15/32-32, NS-2A
.464 (11,79)
15/32-32 NS-2A
ø .331 (8,4)
.945 (24,0)
.657 (16,7)
.477
(12,12)
.777
(19,74)
7000 Series
.383
(9,73)
.687
(17,45)
.312
(7,92)
Dim. 'A'
Miniature Toggle Switches
SEAL
E
EPOXY SEAL
Compatible with “bottom-wash” PC board cleaning methods. Available with C, W-W5, Z & Z3 terminations only.
I
EPOXY POTTED BASE
AVAILABLE HARDWARE
NO.
POLES DIM ‘A’
SP .410 (10,41)
DP
.440 (11,18)
3P .505 (12,83)
4P
.505 (12,83)
Cap
PART NO.
896801000
896802000
896803000
Material: Polyethylene
Finish: Matte
L41 Lever handle
PART NO.
481001000
481002263
481003000
Material: Nylon
Finish: Matte
WHITE
BLACK
RED
WHITE
BLACK
RED
Cap
PART NO.
763701000
763702000
763703000
Material: Vinyl
Finish: Matte
L42 Lever handle
PART NO.
481101000
481102263
481103000
Material: Nylon
Finish: Matte
WHITE
BLACK
RED
WHITE
BLACK
RED
Cap
PART NO.
706201000
706202000
706203000
Material: Vinyl
Finish: Matte
Fits Z3 Termination
female connector
PART NO.
WHITE
BLACK
RED
530100000
Available in loose pieces.
NOTE: Additional nuts, locking rings
and lockwashers available
separately.
Other colors available, consult
Customer Service Center.
759D02000 Sealing Boot 703D02000 Sealing Boot
.204 (5,2)
.658 (16,7)
.524 (13,3)
15 Jan 21
NOTE: For use with T and TP style actuators. Cannot
be used for Switch Functions: 7103, 7203, 7303,
7403, 7107, 7207, 7307, 7407.
1/4-40 uns-2A nut
NOTE: For use with S actuator style when combined
with D, H, H3, Y, and Y4 bushings
F–16
704D02000 Sealing Boot
NOTE: For use with T, TP and T2P style actuators. Cannot
be used for Switch Functions: 7103, 7203, 7303, 7403,
7107, 7207, 7307, and 7407.
Specifications and dimensions subject to change
Dimensions are shown: Inches (mm)
www.ckswitches.com
Loading...