Datalogic PowerScan M8300 Readers Quick Reference Manual
PowerScan™ M8300 Readers
Industrial Handheld Laser Bar Code Reader
with Datalogic’s STAR Cordless System™
Quick Reference Guide
Datalogic ADC, Inc.
959 Terry Street
Eugene, OR 97402
USA
Telephone: (541) 683-5700
Fax: (541) 345-7140
©2007-2014 Datalogic, Inc.
An Unpublished Work - All rights reserved. No part of the contents of this documentation or the procedures described therein may be reproduced or transmitted
in any form or by any means without prior written permission of Datalogic ADC,
Inc. or its subsidiaries or affiliates ("Datalogic" or "Datalogic ADC"). Owners of Datalogic products are hereby granted a non-exclusive, revocable license to reproduce
and transmit this documentation for the purchaser's own internal business purposes. Purchaser shall not remove or alter any proprietary notices, including copyright notices, contained in this documentation and shall ensure that all notices
appear on any reproductions of the documentation.
Should future revisions of this manual be published, you can acquire printed versions by contacting your Datalogic representative. Electronic versions may either
be downloadable from the Datalogic website (www.datalogic.com) or provided on
appropriate media. If you visit our website and would like to make comments or
suggestions about this or other Datalogic publications, please let us know via the
"Contact Datalogic" page.
Disclaimer
Datalogic has taken reasonable measures to provide information in this manual
that is complete and accurate, however, Datalogic reserves the right to change any
specification at any time without prior notice.
Datalogic and the Datalogic logo are registered trademarks of Datalogic S.p.A. in
many countries, including the U.S.A. and the E.U. All other brand and product
names may be trademarks of their respective owners.
Patents
This product may be covered by one or more of the following patents:
Design Pat. AU 310201; AU 310202; CN 693980; CN735959; HK 0602013.5M001; HK
0602013.5M002; JP 1305693; KR 30-0460940; US D570,843 S; USD588,596 S.
US Pat. 5,992,740; 6,305,606 B1; 6,517,003; 6,808,114 B1; 6,997,385 B2; 7,387,246 B2;
5,367,151; 5,449,893; 5,545,889; 6,098,877; 6,220,514 B1; 6,412,698 B2; 6,607,132 B1;
6,817,529 B2; 6,834,805 B2; 7,948,214 B2.
European Pat. 789,315 B1; 895,175 B1; 1,128,314 B1; 1,128,315 B1; 1,396,811 B1;
1,413,971 B1; 1,816,585 B1; 1,942,442 B1.
Additional patents pending.
Table of Contents
Updates and Language Availability .............................................................. 1
Using PowerScan™ M8300 ............................................................................. 2
Scan Line Position .................................................................................. 2
Reading Angle ......................................................................................... 2
Aiming System ........................................................................................ 3
Charging the Batteries ................................................................................... 4
Battery Safety ......................................................................................... 5
Setup ........................................................................................................ 7
PowerScan™ M8300 Configuration ............................................................... 8
PowerScan™ M8300/BC-80X0 Point-to-Point Setup ......................... 8
PowerScan™ M8300/BC-80X0 Stand Alone Setup ............................. 9
Using Multiple Readers with Same Cradle ......................................... 11
PowerScan™ M8300/STAR-MODEM™ Stand Alone Setup ............... 11
PowerScan™ M8300/STAR-SYSTEM™ Setup ..................................... 12
PowerScan™ M8300 Default Configuration ................................................ 14
Technical Features ........................................................................................ 15
Reading Tables .............................................................................................. 16
Datalogic ADC Limited Factory Warranty ................................................... 17
Warranty Coverage ............................................................................... 17
Warranty Claims Process ..................................................................... 17
Warranty Exclusions ............................................................................. 18
No Assignment ..................................................................................... 18
Risk of Loss ........................................................................................... 18
Service and Support ...................................................................................... 19
Compliance .................................................................................................... 20
FCC Compliance ..................................................................................... 20
Radio Compliance ................................................................................. 20
Laser Safety Compliance ...................................................................... 20
LED CLASS ............................................................................................. 21
IC (Industry Canada) .............................................................................. 21
Power Supply ......................................................................................... 21
Brazilian Certification Statements ...................................................... 24
WEEE Compliance ................................................................................. 25
Numeric Table ............................................................................................... 26
NOTES
Quick Reference Guide 1
UPDATES AND LANGUAGE AVAILABILITY
UK/US
The latest drivers and documentation updates for this product are available on the
Datalogic website at www.datalogic.com.
I
Su Internet sono disponibili le versioni aggiornate di driver e documentazione di
questo prodotto. Collegarsi a : www.datalogic.com
F
Les versions mises à jour de drivers et documentation de ce produit sont disponibles
sur Internet. Cliquez sur : www.datalogic.com
D
Im Internet finden Sie die aktuellsten Versionen der Treiber und Dokumentation von
diesem Produkt. Adresse : www.datalogic.com
E
En Internet están disponibles las versiones actualizadas de los drivers y
documentación de este producto. Dirección Internet : www.datalogic.com
Using PowerScan™ M8300
2PowerScan™ M8300
USING POWERSCAN™ M8300
The PowerScan™ M8300 series readers can be used with either an BC-80X0 cradle or
Stargate™ radio base station to build a Cordless Reading System for the collection,
decoding and transmission of barcoded data.
PowerScan
™
M8300 laser readers automatically scan barcodes at a distance. Simply
aim and pull the trigger.
SCAN LINE POSITION
Code scanning is performed along the scan line emitted from the reading window.
This line must cross the entire code. The best reading angles are indicated in the
figure below:
READING ANGLE
Successful scanning is obtained by tilting the reader with respect to the barcode to
avoid direct reflections that impair the reading performance, see the figure below.
Using PowerScan™ M8300
Quick Reference Guide 3
AIMING SYSTEM
PowerScan™ M8300 provides an aiming system. If enabled, a partial trigger press
produces a red spot, which should be aimed over the code center to get the best
reading performance, see figure (1) above. By completely pressing the trigger the
scan line appears to start the code scanning (2).
After setting up the reader
, you can enable or disable the aiming system by reading
the codes below:
Disable Aiming System (Default)
Ì$+Bj0$-"Î
Enable Aiming System
Ì$+Bj1$-'Î
Charging the Batteries
4PowerScan™ M8300
CHARGING THE BATTERIES
Once the BC-80X0/C-8000 is powered, you can charge the reader's batteries.
Place the PowerScan
™
M8300 into the BC-80X0 cradle or the C-8000 battery charger.
The "Reader" LED on the cradle/battery charger turns red.
The battery is completely charged when the "Reader" LED on the cradle/battery
charger turns green.
To change the batteries, unscrew the retaining screw and extract the battery pack
from the reader handle. Then, insert the new battery pack into the reader handle and
tighten the screw. (See the following figures).
Figure 1 – Changing the Batteries
Before using the Battery, read “Battery Safety” in the following section.
Datalogic recommends annual replacement of rechargeable battery packs
to ensure maximum performance.
1
2
Charging the Batteries
Quick Reference Guide 5
BATTERY SAFETY
To install, charge and/or perform any other action on the battery, follow the
instructions in this manual.
WAR NI NG
Do not discharge the battery using any device except for the scanner.
When the battery is used in devices other than the designated product, it
may damage the battery or reduce its life expectancy. If the device causes
an abnormal current to flow, it may cause the battery to become hot,
explode or ignite and cause serious injury.
Lithium-ion battery packs may get hot, explode or ignite and cause serious injury if exposed to abusive conditions. Be sure to follow the safety
warnings listed on this and the following page.
• Do not place the battery pack in fire or heat.
• Do not connect the positive terminal and negative terminal of the battery pack to each other with any metal object (such as wire).
• Do not carry or store the battery pack together with metal objects.
• Do not pierce the battery pack with nails, strike it with a hammer, step
on it or otherwise subject it to strong impacts or shocks.
• Do not solder directly onto the battery pack.
• Do not expose the battery pack to liquids, or allow the battery to get
wet.
• Do not apply voltages to the battery pack contacts.
WAR NI NG
In the event the battery pack leaks and the fluid gets into your eye, do not
rub the eye. Rinse well with water and immediately seek medical care. If
left untreated, the battery fluid could cause damage to the eye.
CAUTION
Always charge the battery at 32° – 104°F (0° - 40°C) temperature range.
Use only the authorized power supplies, battery pack, chargers, and
docks supplied by your Datalogic reseller. The use of any other power supplies can damage the device and void your warranty.
Do not disassemble or modify the battery. The battery contains safety and
protection devices, which, if damaged, may cause the battery to generate
heat, explode or ignite.
CAUTION
Do not place the battery in or near fire, on stoves or other high temperature locations.
Do not place the battery in direct sunlight, or use or store the battery
inside cars in hot weather. Doing so may cause the battery to generate
heat, explode or ignite. Using the battery in this manner may also result in
a loss of performance and a shortened life expectancy.
Charging the Batteries
6PowerScan™ M8300
As with other battery types, Lithium-Ion (LI) batteries will lose capacity over time.
Capacity deterioration is noticeable after one year of service whether the battery is in
use or not. It is difficult to precisely predict the finite life of a LI battery, but cell
manufacturers rate them at 500 charge cycles. In other words, the batteries should be
expected to take 500 full discharge/charge cycles before needing replacement. This
number is higher if partial discharging/recharging is adhered to rather than full/deep
discharging,
The typical manufacturer advertised useful life of LI batteries is one-three years,
depending on usage and number of charges, etc., after which they should be
removed from service, especially in mission critical applications. Do not continue to
use a battery that is showing excessive loss of capacity, it should be properly recycled
/ disposed of and replaced. For most applications, batteries should be replaced after
one year of service to maintain customer satisfaction and minimize safety concerns.
Collect and recycle waste batteries separately from the device to comply with
European Directive 2006/66/EC, 2011/65/EU, 2002/96/EC and 2012/19/EU,
and
subsequent modifications, US and China regulatory and other laws and regulations
about the environment.
CAUTION
Do not place the battery in microwave ovens, high-pressure containers or
on induction cookware.
Immediately discontinue use of the battery if, while using, charging or
storing the battery, the battery emits an unusual smell, feels hot, changes
color or shape, or appears abnormal in any other way.
Do not replace the battery pack when the device is turned on.
Do not remove or damage the battery pack’s label.
Do not use the battery pack if it is damaged in any part.
Battery pack usage by children should be supervised.
Loading...