Danfoss VLT LCP 11, VLT LCP 12, VLT LCP 21 Installation Instructions Manual

IP55 rated remote mounting kit for mounting of VLTp Control
Panel of type LCP 11, LCP 12 and LCP 21.

Items supplied

•

Sealing gasket

•

Mounting bracket

•

Mounting screws

•

Cable (3 m)

Mounting

1. Fit the sealing gasket on the LCP.

Illustration 1.1 Example: Gasket on LCP

2. Cut out section of panel and locate the LCP in the
cut-out.

Illustration 1.2 Dimensions

1Panel cut out

Panel thickness: 1-3 mm

Table 1.1 Legend to Illustration 1.2

Illustration 1.3 Example: LCP on Mounting Plate

1Mounting plate

2Gasket

3LCP

Table 1.2 Legend to Illustration 1.3

3. Slide the mounting bracket into place on the
backside of the LCP and fasten it with screws.

Illustration 1.4 Mounting Bracket on LCP

Installation Instructions

VLTp LCP Remote Mounting Kit

MI02C202 - VLTp is a registered Danfoss trademark

1

4. Connect the cable to LCP and fasten it with the
provided thread cutting screws. Tightening torque

1.3 Nm.

Illustration 1.5 Cable Fastening

*MI02C202*

MI02C202132R0010 Rev. 2013-01-24