Danfoss Smart home heating User guide
Danfoss Link™ App setup guide
Smart home heating
with the remote you know best
Need help connecting your app?
No problem. Go to linkapp.danfoss.com and you’ll find additional information as well as the phone number for your local Danfoss Link™ App Helpdesk.
Enjoy the home heating of tomorrow. Enjoy Danfoss Link.
2easy
steps for remote control.
Danfoss A/S · Heating · Haarupvaenget 11 · DK-8600 Silkeborg
Email: heating@danfoss.com · heating.danfoss.com
Danfoss can accept no responsibility for possible errors in catalogues, brochures and other printed material. Danfoss reserves the right to alter its products without notice. This also applies to products already on order provided that such alterations can be made without subsequential changes being necessary in speci cations already agreed.
All trademarks in this material are property of the respective companies. Danfoss and the Danfoss logotype are trademarks of Danfoss A/S. All rights reserved.
linkapp.danfoss.com
VU.JP.C1.02 |
© Copyright Danfoss Heating | Pravda.dk | 2015.03 |
Congratulations on your new Danfoss Link system!
This latest version of Danfoss Link™ Central Controller with built-in Wi-Fi gives you full control from your smartphone. Simply follow these few easy steps and experience true smart home heating.
Step 1: Download the Danfoss Link™ App
Get the Danfoss Link™ App from
Google Play or App Store.
Scan to download the app
Step 2: Pair the app with your Danfoss Link™ CC
Pairing your Danfoss Link™ App with the Central Controller is very easy. Simply follow the instructions given in the app.
1. Start page |
2. Info page |
3. Locate the Paring |
4. Enter your Pairing |
|
|
Code Step 1 - 9 |
Code |
You can pair up to 20 smartphones to a single Danfoss Link™ CC.
Up to three smartphones can use it at the same time.
Additional information:
How to enable Wi-Fi on your Danfoss Link™ CC
Setting up Wi-Fi on your Danfoss Link™ CC is a part of Step 2, but can also be setup by following the steps shown below.
1. |
Press House Control |
4. |
Press ON |
2. |
Select Settings |
5. |
Accept the End User |
3. |
Select Wi-Fi and |
|
License Agreement |
|
Apps |
6. |
Find your network |
|
|
|
and enter your |
|
|
|
password |
Note: It may take |
7. Select App Options |
a few minutes to |
and follow the |
connect to the |
instructions on the |
Internet. |
Danfoss Link™ App |
Loading...