User Manual
PLUS+1® Compliant
S7 PVE NP Function Block
www.danfoss.com
User Manual
PLUS+1® Compliant S7 PVE Function Block with NP Option
Revision history Table of revisions
Date Changed Rev
January 2018 First edition 0101
2 | © Danfoss | January 2018 AQ00000239en-000101
User Manual
PLUS+1® Compliant S7 PVE Function Block with NP Option
Contents
S7 PVE Function Block with Neutral Power Off (NP) Option
Inputs....................................................................................................................................................................................................4
Outputs................................................................................................................................................................................................ 4
MC Controller Configurations......................................................................................................................................................4
Configure an MFIn...................................................................................................................................................................... 5
Configure a DigAn...................................................................................................................................................................... 6
SC Controller Configurations....................................................................................................................................................... 6
Configure an MFIn ..................................................................................................................................................................... 7
Configure a DigAn...................................................................................................................................................................... 8
©
Danfoss | January 2018 AQ00000239en-000101 | 3
User Manual
PLUS+1® Compliant S7 PVE Function Block with NP Option
S7 PVE Function Block with Neutral Power Off (NP) Option
A dedicated NP output pin helps users identify whether the solenoid valves in the actuator are energized
or de-energized.
Inputs
The input to the function block is described..
Item Type Description
Sol_Pin U16 Input from the valve actuator that indicates if the solenoid is energized.
Outputs
The output of the function block is described.
Item Type Description
Sol_En BOOL T—Solenoid is energized, that is, out of neutral.
F—Solenoid is de-energized, that is, in neutral.
MC Controller Configurations
Configure inputs on your controller so they are compatible with the signals of your function block.
Input Configuations
Function Block Input Compatible Controller Input Type Controller Input Configuration Action
Sol_Pin MFIn Delete the PinConfig0 route.
Delete the PinConfig1 route.
DigAn Delete the PinConfig0 route.
4 | © Danfoss | January 2018 AQ00000239en-000101
User Manual
PLUS+1® Compliant S7 PVE Function Block with NP Option
S7 PVE Function Block with Neutral Power Off (NP) Option
Configure an MFIn
Configure the input from the valve actuator that notifies the block of the state of the pin.
1. In the PLUS+1® GUIDE template, enter the Inputs page.
2. Enter the MFIn that receives the input signal.
3. Make the changes that are shown in the following figure.
©
Danfoss | January 2018 AQ00000239en-000101 | 5
User Manual
PLUS+1® Compliant S7 PVE Function Block with NP Option
S7 PVE Function Block with Neutral Power Off (NP) Option
Configure a DigAn
Configure the DigAn so that it can accept the input signal.
1. In the GUIDE template, enter the Inputs page.
2. Enter the DigAn that receives the input signal.
3. Make the changes that are shown in the following figure.
SC Controller Configurations
Configure inputs on your controller so they are compatible with the signals of your function block.
Function Block Input Compatible Controller Input Type Controller Input Configuration Action
Sol_Pin MFIn Delete the:
•
Bias route.
Range route.
•
DigAn Delete the:
•
Bias route.
Range route.
†
When present.
•
•
Direction route.
†
6 | © Danfoss | January 2018 AQ00000239en-000101
User Manual
PLUS+1® Compliant S7 PVE Function Block with NP Option
S7 PVE Function Block with Neutral Power Off (NP) Option
Configure an MFIn
Configure the input from the valve actuator that notifies the block of the state of the pin.
1. In the PLUS+1® GUIDE template, enter the Inputs page.
2. Enter the MFIn that receives the input signal.
3. Make the changes that are shown in the following figure.
©
Danfoss | January 2018 AQ00000239en-000101 | 7
User Manual
PLUS+1® Compliant S7 PVE Function Block with NP Option
S7 PVE Function Block with Neutral Power Off (NP) Option
Configure a DigAn
Configure the DigAn so that it can accept the input signal.
1. In the GUIDE template, enter the Inputs page.
2. Enter the DigAn that receives the input signal.
3. Make the changes that are shown in the following figure.
8 | © Danfoss | January 2018 AQ00000239en-000101
Danfoss
Power Solutions GmbH & Co. OHG
Krokamp 35
D-24539 Neumünster, Germany
Phone: +49 4321 871 0
Danfoss
Power Solutions ApS
Nordborgvej 81
DK-6430 Nordborg, Denmark
Phone: +45 7488 2222
Danfoss
Power Solutions (US) Company
2800 East 13th Street
Ames, IA 50010, USA
Phone: +1 515 239 6000
Danfoss
Power Solutions Trading
(Shanghai) Co., Ltd.
Building #22, No. 1000 Jin Hai Rd
Jin Qiao, Pudong New District
Shanghai, China 201206
Phone: +86 21 2080 6201
Products we offer:
Hydro-Gear
www.hydro-gear.com
Daikin-Sauer-Danfoss
www.daikin-sauer-danfoss.com
Cartridge valves
•
DCV directional control
•
valves
Electric converters
•
Electric machines
•
Electric motors
•
Gear motors
•
Gear pumps
•
Hydraulic integrated
•
circuits (HICs)
Hydrostatic motors
•
Hydrostatic pumps
•
Orbital motors
•
PLUS+1® controllers
•
PLUS+1® displays
•
PLUS+1® joysticks and
•
pedals
PLUS+1® operator
•
interfaces
PLUS+1® sensors
•
PLUS+1® software
•
PLUS+1® software services,
•
support and training
Position controls and
•
sensors
PVG proportional valves
•
Steering components and
•
systems
Telematics
•
Danfoss Power Solutions is a global manufacturer and supplier of high-quality hydraulic and
electric components. We specialize in providing state-of-the-art technology and solutions
that excel in the harsh operating conditions of the mobile off-highway market as well as the
marine sector. Building on our extensive applications expertise, we work closely with you to
ensure exceptional performance for a broad range of applications. We help you and other
customers around the world speed up system development, reduce costs and bring vehicles
and vessels to market faster.
Danfoss Power Solutions – your strongest partner in mobile hydraulics and mobile
electrification.
Go to www.danfoss.com for further product information.
We offer you expert worldwide support for ensuring the best possible solutions for
outstanding performance. And with an extensive network of Global Service Partners, we also
provide you with comprehensive global service for all of our components.
Local address:
Danfoss can accept no responsibility for possible errors in catalogues, brochures and other printed material. Danfoss reserves the right to alter its products without notice. This also applies to products
already on order provided that such alterations can be made without subsequent changes being necessary in specifications already agreed.
All trademarks in this material are property of the respective companies. Danfoss and the Danfoss logotype are trademarks of Danfoss A/S. All rights reserved.
©
Danfoss | January 2018 AQ00000239en-000101
Loading...