Danfoss Oil Nozzles KH Data sheet

General data sheet

Oil Nozzles Type KH

For specific information on this product, please contact Danfoss Burner Components

Identification

The nozzle is marked with the following
information:

Serial number for
internal use

1.00 Reference capacity (USgal/h)

Specification 700 kPa (7 bar), 1.7 cSt.,
point: 790 kg/m3
Capacity tolerance: ± 5%

60° Spray angle

KH Spray pattern
(KH = Kerosene Hollow)

Oil nozzles type KH are designed for
domestic high-pressure oil burners on the
Japaneese market operating with kero­sene. They are available with spray angle
60°, spray pattern H and sizes from 0.4 to

1.75 USgal/h.
The nozzles are equipped with sintered
bronze filters.

Design

A Nozzle housing
B Bottom screw
C Nozzle cone
D Orifice disc
H Filter

Application and Features

• Kerosene

• 100% test of capacity and
performance

Spray angles

Spray pattern H

Hollow

© Danfoss | 2019.09

BD.CA.Y1.02| 1

General data sheet Oil Nozzles Type KH

Technical Data

Filters

Capacity 0.40-0.65 USgal/h: Capacity 0.75-1.35 USgal/h:
45 μm sintered bronze 75 μm sintered bronze

Capacity 1.40-1.75 USgal/h:
140 μm monel mesh

Tightening torques

Recommended
tightening torque

Max. tightening torque 25 Nm (2.5 kpm)

15 to 20 Nm

(1.5 to 2.0 kpm)

Oil Nozzles Type KH

Reference capacity Spray angle/ Specified capacity
USgal/h patterns l/h

0.40 60°H 1.40

0.50 60°H 1.81

0.65 60°H 2.30

0.75* 60°H 2.70

0.85 60°H 3.30

1.00 60°H 3.80

1.10 60°H 4.05

1.20 60°H 4.25

1.25 60°H 4.35

1.35 60°H 4.80

1.40 60°H 5.15

1.50 60°H 5.70

1.75 60°H 6.30

*Nozzles marked KHF have 45 μm sintered bronze filter.

Dimensions

Nozzle holder

Additional documentation on burner components is available on http://heating.danfoss.com/ or https://store.danfoss.com/

2 | © Danfoss | DHS-SDBT/DK | 2019.09

BD.CA.Y1.02