Danfoss Oil Nozzles HVO Data sheet

30-369.10

Data sheet

Oil Nozzles Type HVO

Application

Oil nozzles type HVO are designed for domestic
oil burners operating with HVO biofuels or
blends hereof. As to the construction and
atomizing, the HVO nozzle is based on the same
design as all types of Danfoss brass nozzles.

Identification The HVO nozzles are marked with this

information:

Stamped on the flats:

HVO Conformity mark

1.26 Nominal throughput in kg/h @ 10 bar (according to HVO)

16.4 Nominal gross “(g)” Calorific Value (CV) burner throughput

60°S Spray angle and pattern (S = Solid, H = Hollow)

Filters

Features:

• HVO biofuels or blends hereof

• 100% capacity and performance tested

• kW/h marking

Danfoss

Batch number for internal use

in kW/h @ 10 bar

© Danfoss | 2021.05

Capacity 0.40 to 0.85 USgal/h:

45 μm sintered bronze

Capacity 1.00 to 1.75 USgal/h:

75 μm sintered bronze

AI379035092197en-GB0101 | 1

Data sheet Oil Nozzles Type HVO

Technical data

Capacity

Spray angle Capacity

kg/h

60°S 80°S 60°H 80°H

1.26 030B0604 - - - 16.4

1.99 030B0607 - - - 25.9

2.74 030B0610 - - - 35.6

Design O-ring sealing on sizes 0.60 USgal/h and

below

A. Disc

B. Cone

C. Nozzle housing

D. O-ring

E. O-ring adapter

F Sinter filter

kW/h

Danfoss

30-368.10

Spray angles and patterns

Bottom screw on sizes 0.65 USgal/h and
above

G. Bottom screw

H (Hollow) S (Solid)

2 | © Danfoss | 2021.05

AI379035092197en-GB0101