Data sheet
Oil Nozzles Types HR and SR
Application
Identification
Technical data
Oil nozzles types HR and SR are designed for domestic high-pressure oil burners where roundshaped nozzle head are requested. They are available with 3 different spray angles and sizes from 0.3 to 1.00 USgal/h.
HR and SR nozzles are equipped with sintered bronze filter and have the same performances as the corresponding sizes of OD-nozzles.
The EN nozzles 1.46 to 3.72 are marked with these informations.
Other nozzles are without EN marking.
Features:
•Light and heavy oil
•EN nozzles from 1.46 to 3.72 kg/h
•Standard nozzles 0.30 and 0.35 USgal/h
•100% test of capacity and performance in accordance with EN
Stamped on the flats:
2.37 |
|
EN specified capacity (kg/h) |
|
||||
|
|
|
|
|
|
||
EN 80° II |
|
Spray angle & Angle index (according to EN 293/EN 299) |
|||||
|
|
|
|
|
|
||
EN specification point |
|
1000 kPa (10 bar), 3.4 cSt., 840 kg/m³ |
|
||||
|
|
Capacity tolerance: ± 4% |
|
|
|||
|
|
|
|
|
|
||
|
|
Serial number for internal use |
|
||||
|
|
|
|
|
|
||
0.60 |
|
Reference capacity (USgal/h) |
|
||||
|
|
|
|
|
|
||
60° SR |
|
Spray angle & pattern (HR = Hollow, SR = Solid) |
|||||
|
|
|
|
|
|
||
Reference specification point |
700 kPa (7 bar), 3.4 cSt., 820 kg/m³ |
|
|||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Reference capacity |
|
Spray angle / patterns |
|
Specified capacity |
|||
USgal/h |
|
|
|
|
|
|
kg/h |
45° |
|
|
60° |
|
80° |
||
|
|
|
|
|
|||
|
|
|
|
|
|
|
|
0.30 |
|
|
|
|
|
SR* |
1.15 |
|
|
|
|
|
|
|
|
0.35 |
|
|
|
|
HR* |
SR* |
1.35 |
|
|
|
|
|
|
|
|
0.40 |
SR |
|
|
SR |
HR |
SR |
1.46 |
|
|
|
|
|
|
|
|
0.45 |
SR |
|
HR |
SR |
HR |
SR |
1.66 |
|
|
|
|
|
|
|
|
0.50 |
SR |
|
HR |
SR |
HR |
SR |
1.87 |
|
|
|
|
|
|
|
|
0.55 |
SR |
|
HR |
SR |
HR |
SR |
2.11 |
|
|
|
|
|
|
|
|
0.60 |
SR |
|
HR |
SR |
|
SR |
2.37 |
|
|
|
|
|
|
|
|
0.65 |
SR |
|
HR |
SR |
|
SR |
2.67 |
|
|
|
|
|
|
|
|
0.75 |
SR |
|
HR |
SR |
HR |
SR |
2.94 |
|
|
|
|
|
|
|
|
0.85 |
SR |
|
|
SR |
|
|
3.31 |
|
|
|
|
|
|
|
|
1.00 |
SR |
|
|
SR |
HR |
|
3.72 |
|
|
|
|
|
|
|
|
* not EN nozzles
© Danfoss | 2019.09 |
BD.CA.X2.02 | 1 |