Danfoss Oil Nozzles AH, Oil Nozzles AS, Oil Nozzles AB, Oil Nozzles OD Data sheet

Data sheet

Oil Nozzles Types AH, AS, AB and OD

Application Oil nozzles type AH, AS, AB and OD are designed

for residential high-pressure oil burners. AH, AS and AB are available with 4 different spray angles and sizes from 0.4 to 3 USgal/h. For other sizes, please request our standard OD program, which covers from 0.30 to 35 USgal/h. Nozzle sizes up through 1.75 USgal/h are equipped with sintered bronze filters. Larger sizes have monel strainers.

Identification

The nozzles are marked with the following information (example shows type AH):

Stampe d on the flats

Serial number for internal use

CSA Certification marking

0.50 Capacity (USgal/h) Specification point: 100 psi (7 bar), 37 SSU (3.4 cSt.), 6.84 lb/gal (820 kg/m³) 60° Spray angle

Spray pattern:

AH, OD- H = Hollow AS, OD-S = Solid AB, OD-B = Semi-solid

Features:

• Light and heavy oil

• CSA certified nozzles from 0.4 to 2.0 Usgal/h

• 100% test of capacity and performance

Technical Data

Design

Program

For sizes available please refer to nozzle matrix in Product Overview, Oil Burner Nozzles Series Brass. Please also refer to our program of Hago Steel Nozzles, Oil Burner Nozzles Series - Steel.

Recommended tightening torque

• 130 - 180 in-lbs (15 to 20 Nm)

A: Nozzlehousing B: Bottom screw C: Nozzle cone D: Orifice disc H: Filter

Maximum tightening torque

• 220 in-lbs (25 Nm)

Filters

Capacity 0.4 - 1.75 USgal/h

75 μm sintered bronze

H B A C D

Data sheet Oil Nozzles Types AH, AS, AB and OD

Spray angles/patterns

Dimensions

Spray angles

AH, OD-H

Hollow

Schematic spray patterns

AS, OD-S

Solid

AB, OD-B

Semi-solid

Additional documentation on burner components is available on http://heating.danfoss.com/ or https://store.danfoss.com/