Danfoss OD Data sheet

Data sheet

Oil Nozzles Type OD

Application Oil nozzles type OD are designed for domestic

and commercial high-pressure oil burners
operating with light or heavy fuel. They are
available with 4 different spray angles, 3 spray
patterns and sizes from 0.20 to 35.0 USgal/h.
As to construction and atomizing, the OD
nozzle is the basic model for all Danfoss oil
nozzles.

Identification The EN nozzles 1.46 to 6.55 kg/h are marked

with this information.
Other nozzles are without EN marking.

Stamped on the flats:

2.37 EN specified capacity (kg/h)
EN 80° II Spray angle & Angle index (according to EN 293/EN 299)
EN specification point 1000 kPa (10 bar), 3.4 cSt., 840 kg/m³

Capacity tolerance: ± 4%

Serial number for internal use

0.60 Reference capacity (USgal/h)
60° S Spray angle & pattern (H = Hollow, S = Solid, B = Semi-solid)
Reference specification point 700 kPa (7 bar), 3.4 cSt., 820 kg/m³

Features:

• Light and heavy oil

• EN nozzles from 1.46 to 6.55 kg/h

• Standard nozzles from 0.20 to 35 USgal/h

• 100% test of capacity and performance in

accordance with EN

Filters

Capacity 0.20 to 0.35 USgal/h:

30 μm sintered bronze

Capacity 1.00 to 1.75 USgal/h:

75 μm sintered bronze

Capacity 12.00 to 35.0 USgal/h:

without filter

Recommended tightening torque: 15 to 20 Nm (1.5 to 2.0 kpm).
Max. tightening torque: 25 Nm (2.5 kpm).

Capacity 0.40 to 0.85 USgal/h:

Capacity 2.00 to 11.0 USgal/h:

45 μm sintered bronze

140 μm monel mesh

© Danfoss | 2021.05

AI106986454275en-010301 | 1

Data sheet Oil Nozzles Type OD

Technical data

Reference

capacity
USgal/h

0.20¹

0.25¹ S 0.95

0.30¹ H S H S 1.15

0.35¹ H S H S 1.35

0.40 S H S H S 1.46

0.45 S H S H S 1.66

0.50 S H S H S H S 1.87

0.55 S H S H S H S 2.11

0.60 S H S H S B H S B 2.37

0.65 S H S B H S B H S B 2.67

0.75 S H S B H S B H S B 2.84

0.85 S H S B H S B H S B 3.31

1.00 S H S B H S B H S B 3.72

1.10 S H S H S H S 4.24

1.20 H S H S H S 4.45

1.25 S H S B H S B H S B 4.71

1.35 S H S B H S B H S B 5.17

1.50 S H S B H S B H S B 5.84

1.65 S H S H S H S 6.08

1.75 S H S H S H S 6.55

2.00 S H S B H S B H S B 7.42

2.25 S H S B H S B H S B 8.35

2.50 S H S B H S B H S B 9.29

2.75 S H S B H S B H S B 10.5

3.00 S H S B H S B H S B 11.6

3.50 S S S S 12.9

3.75 B B B 13.8

4.00 S S S 14.2

4.50 S B S B S B 16.1

5.00 S B S B S B 18.5

5.50 S B S B S B 20.9

6.00 S B S B S B 23.4

6.50 B B B 26.1

7.00 S 27.9

7.50 B B B 29.8

8.00 S 31.5

8.50 B B B 33.1

9.00 S 35.4

10.00 B B B 37.7

11.00 B B B 42.5

12.00 B B B 47.7

13.50 B B B 54.3

15.00 B B B 60.4

17.00 B B 67.4

19.50 B B 76.2

22.00 B B B 86.4

25.00 B 96.7

28.00 B 109.5

31.50 B B B 122.5

35.00 B 133.5

30° 45° 60° 80°

Spray angles/patterns

S 0.76

Specified capacity

kg/h

2 | © Danfoss | 2021.05

EN nozzles

¹Capacity tolerances: ±6%

AI106986454275en-010301