Danfoss Mounting on convector Installation guide
INSTRUCTIONS
Operator with combined remote mounted sensor and dial
013R9223
Mounting on convector
with Danfoss RA 2000 valve
1
5/64"
2
013R9223
3
Radius min.10"
4-5 ft
4
1
2
5
5/64"
6
3
7
8
/1 inch
4
Installing operator through
conduit
with Danfoss RA 2000 valve
5
6
7
8
Danfoss
Toronto, Baltimore
Toll Free: 866-375-HVAC (4822)
www.na.heating.danfoss.com
02/2013 VI.33.V5.22
INSTRUCTIONS
If this operator is being installed on a
RAV, VMT or KOVM valve, it is necessary to replace the pre-attached small
socket with the large socket included
in product package.
RAV/VMT/KOVM valves have a larger operator
connection than RA 2000 valves.
If this operator unit is being installed
on a RA valve tted with a RA to RA
2000 adapter (013G8070), the socket
spring must be replaced with the
gray spring from the large socket included in the product package.
3/16" (34 mm) OD
Small Socket
1
Small Socket
1
Large Socket
2
Large Socket
2 3
Small Socket
Gray spring
Gray spring from
large socket
3
Small Socket
5/64"
4
Limiting and blocking
the setting range
Upper limit setting (max. setting)
Lower limit setting (min. setting)
Locking setting
is done by combining the upper &
lower limiter settings
5
4
3
2
1
STOP
STOP
1
2
3
4
1
2
3
Loading...