Danfoss MMILDS Data sheet
Data Sheet
Control panel
Type MMILDS
Electronic controller suitable for all HVAC/R software application needs.
MMILDS is MCX’s family remote interface. It’s •tted with a LED display for displaying data from a MCX or from 2 probes that can be locally connected. The connection with any MCX controller is through the CAN bus network. The power supply comes from controller which it is connected. All the information about the user interface is loaded inside the MCX controller; that’s why there is no need of programming the MMILDS interface.
Features:
• LED display 3-½ digit
• Easy connection to MCX CANbus network through wired connector kit
• Connections for 2 external probes
• Powered by the MCX which it is connected to
• Dimensions 84 x 36 mm
• Panel mounting
AI184586421012en-000501
Control panel, type MMILDS
Product speci€cation
General features
Table 1: General features
Features |
Description |
|
Power supply |
From the MCX through the RJ12 telephone connector |
|
|
Maximum power consumption: 1.5 W |
|
Analog input |
AI1: 0 / 20 mA, 4 / 20 mA, 0 / 5 V, 0 / 1 V |
|
|
AI2: NTC, default 10 kΩ a 25 °C |
|
Operating conditions |
CE: -20T60, 90% RH non-condensing |
|
Storage conditions |
-30T80, 90% RH non-condensing |
|
Integration |
In Class I and / or II appliances |
|
Index of protection |
IP65 |
|
Period of electric stress across insulat- |
Long |
|
ing parts |
|
|
Resistance to heat and •re |
Category D |
|
Immunity against voltage surges |
Category I |
|
Software class and structure |
Class A |
|
Construction |
To be incorporated |
|
|
|
Con€guration
Figure 1: Key reference
<![if ! IE]><![endif]>ANFOSS80G8100.01
<![if ! IE]><![endif]>D
Table 2: Con€guration
Function |
Keys |
Enter Program Mode |
1+3 for 2s |
Exit Program Mode |
1+3 |
Scroll list of parameters |
1 (scroll UP) and 3 (scroll DOWN) |
Edit value |
2 |
Esc and NOT Save |
2 |
Esc and Save |
2 pressed for 3 seconds |
|
|
Table 3: Type of codes
Code |
Description |
Values |
Default |
NID |
CAN node ID |
1-127; 255=not con•gured |
255 |
BAU |
CAN baudrate (kBd) |
0, 20, 50, 125, 250, 1000; 0=auto baud |
50 |
CON |
CAN address of the MCX connected |
1-127; 255=auto detect |
255 |
TYP |
Type of AI1 analog input |
2=0 / 5 V, 3=4 / 20 mA, 7=0 / 1 V, 9=0 / 20 mA |
2 |
SEL |
Analog input to be displayed |
0=no, 1=AI1, 2=AI2 |
2 |
|
|
|
|
© Danfoss | Climate Solutions | 2021.03 |
AI184586421012en-000501 | 2 |
Loading...