Installation Guide
Bluetooth Adapter
Type EKA 202 & EKA 203
Bluetooth Adapter (EKA 202 & EKA 203) is a plug in type device for ERC and EETa range of controllerstoprovidebluetoothconnectivitywithcompanionmobileapplication'KoolConnect'.
•Bluetooth Low Energy 5.2
•Simple Plug and Play module
• Powered from controller |
Scan |
• Data logging for 15 days |
to |
connect |
|
• Real time clock with power back up option |
<![if ! IE]> <![endif]>Danfoss 80G8346 |
|
080R4219
AN404136884216en-000101
Fig. 1: EKA 202/203
Technical specifications:
Specifications |
EKA 202 |
|
EKA 203 |
||
|
|
|
|
|
|
Input voltage |
5 V DC / 12 V DC |
|
5 V DC / 12 V DC |
||
|
|
|
|
|
|
Max Current |
70 mA |
|
76 mA |
||
|
|
|
|
|
|
Bluetooth version |
5.2 |
|
5.2 |
||
|
|
|
|
|
|
Bluetooth range (without any obstruction around) |
10 m |
|
10 m |
||
|
|
|
|
|
|
Data storage duration |
15 days |
|
15 days |
||
|
|
|
|
|
|
RTC power back up |
No power backup |
|
36 hours (approx.) |
||
|
|
|
|
|
|
Communication interface with controller |
UART, One wire |
|
UART, One wire |
||
|
|
|
|
|
|
Operating temperature |
-25 – +55 °C |
|
-25 – +55 °C |
||
|
|
|
|
||
Maximum humidity |
<90% RH (Non-condensing) |
<90% RH (Non-condensing) |
|||
|
|
|
|
|
|
Storage temperature |
-40 – +70 °C |
|
-40 – +70 °C |
||
|
|
|
|
|
|
Ordering code |
Bluetooth adapter |
080N0022 (Single Pack) |
| 080N0026 (I Pack) |
080N0023 (Single Pack) | 080N0027 (I Pack) |
|
|
|
|
|
||
Interface cable |
080N0329 (ERC 11x) | |
080N0327 (ERC21x) | |
080N0325 (EETa) |
||
|
|||||
Supported Controllers |
ERC11x, ERC21x (080G34xx series only) and EETa |
||||
|
|
|
|
||
Approvals1) |
CE, UL, FCC, ISED |
|
|
1) For latest approval status and other local approvals, please check at danfoss.com or contact your local Danfoss representative.
Dimensions (units are in mm)
Fig. 2: Top view
59.6
<![if ! IE]><![endif]>ctconne to Scan
B
Fig. 3: Rear view
<![if ! IE]> <![endif]>Danfoss 80G8311 |
|
17.7 |
|
|
|
|
|
||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
A
<![if ! IE]><![endif]>35
C
<![if ! IE]><![endif]>Danfoss 80G8340
A.Bluetooth Adapter
B.QR code chip
C.TTL port for connection with controller
Procedure for adapter installation
1.Detach the QR code chip from the Bluetooth Adapter by breaking. The QR code chip is used for pairing with mobile application.
<![if ! IE]><![endif]>ctnneo otcScan
<![if ! IE]><![endif]>Danfoss80G8345
2.Attach the QR code chip to the door or any clean part of the cabinet that can be easily accessed for the pairing procedure.
Scan to connec |
t |
|
<![if ! IE]> <![endif]>Danfoss 80G8315 |
<![if ! IE]> <![endif]>Danfoss 80G8315 |
© Danfoss | Climate Solutions | 2022.02 |
AN404136884216en-000101 | 1 |
3.Secure the Bluetooth Adapter in a convenient location using double sided tape (Fig. 4-5) or by screw mounting (Fig. 6)
Fig. 4 |
Fig. 5 |
<![if ! IE]> <![endif]>Danfoss 80G8313 |
<![if ! IE]> <![endif]>Danfoss 80G8314 |
Fig. 6
<![if ! IE]><![endif]>Danfoss 80G8317
4.Power off the controller by switching off the main supply to the controller.
5.Connect the Bluetooth Adapter to communication port of controller using interface cable (Fig. 7)
–TTL port in ERC21x and EETa
–DI port in ERC11x
Fig. 7
Bluetooth Adapter
Interface
cable
Controller
Note:
<![endif]>Danfoss 80G8316
•Ensure the Bluetooth Adapter is installed away from heating source, direct sunlight, dripping water, dusty environment.
•Avoid any obstruction around the adapter that impacts Bluetooth communication.
•Interface cable ordered separately for the respective controller to be used for connecting Bluetooth Adapter to Controller.
Power up sequence and connection with mobile application:
Function |
Description |
Power up the controller connected with Power-up Bluetooth Adapter.
Bluetooth Adapter starts power up initialization (it gets power from connected controller).
|
After power up initialization, the adapter |
|
|
establishes communication with connected |
|
Established |
controller and start broadcasting. |
|
communication |
|
|
with controller and |
|
|
broadcasting. |
Unsuccessful identification/communication with |
|
|
||
|
controller. |
|
Connection with mobile |
Search and connect broadcasting adapter using |
|
KoolConnect companion app. Click on "Set |
||
app and Real time clock |
time" when mobile app shows alert message to |
|
(RTC) update |
||
synchronize the adapter time with mobile time.1) |
1) Note:
Illustration
Blue Red Green
<![if ! IE]><![endif]>Danfoss80G8341
Green
<![if ! IE]><![endif]>Danfoss80G8342
Green
<![if ! IE]><![endif]>Danfoss80G8347
Red
<![if ! IE]><![endif]>Danfoss80G8343
Blue
<![if ! IE]><![endif]>Danfoss80G8344
LED info
•White – Blue – Red – Green LED blinking in sequence indicates power up initialization.
•After few seconds, Green LED rapid flashes indicating controller detection is in progress.
•Green LED slow flashes (1s/1s)
•Red LED rapid flashes.
•LED turns to constant Blue indicating Bluetooth is connected.
1.Ensure that the module is connected to the mobile app after final power up and installation to finalize the setup properly. If the module is not connected after final power up at customer's site, the module will log the data without the correct time stamp.
2.If the Bluetooth Adapter is changed from one controller model to another (ex: ERC112C to ERC112D or EETa 3W), all the logged data from previous controller are erased and start logging afresh from new controller. The data from previous controller is retained if one code no. is changed to another code no. within the same controller model.
KoolConnect companion mobile app download and connection:
|
Android version 8.0 or later |
|
|
iOS 11 or later (Iphone 8 & above) |
|
|
|
KoolConnect |
2 | AN404136884216en-000101 |
© Danfoss | Climate Solutions | 2022.02 |