Danfoss ECtemp 130, ECtemp 132 Data sheet

YEAR

WARRANTY

Data Sheet

Product

ECtemp 130, ECtemp 132

ECtemp 130/132 is a line of simple electronic 16 Amps thermostats with

possibility to be installed directly on the wall. The thermostats have only one
button for adjusting the temperature and for OFF mode. Furthermore, it has an
LED indicator showing standby (green light) and heating (red light) periods. The
thermostats do not have wire sensor failure monitoring. Wire temperature sensor
included in the set.

ECtemp 130 is equipped with a wire (floor) sensor used for control of Comfort
Floor Heating applications. The thermostat has a dial for adjusting the temperature
setting with a numeric scale from , to 5 (meaning from OFF, 5 °C to 45 °C and
each step corresponds to approx. 9 °C). This type of thermostat can be used for
outdoor applications too – Ice and Snow Melting on Ground, Frost Protection on
Roofs, Pipe Tracing, etc., because it doesn’t have wire sensor failure monitoring.

ECtemp 132 is equipped with a built-in air sensor to control the room temperature
and an additional floor (wire) sensor to limit the maximum floor temperature. The
main application is Total (Direct) Heating via Floor systems. The thermostat has a
dial for adjusting the room temperature, with a degree scale from , to 35 °C
(which means from OFF, 5 °C to 35 °C). Adjusting maximum floor temperature is
provided with potentiometer placed under front cover (default 35 °C).

Product specifications

Benefits

• Low standby consumption

• Installation on the wall

• LED indication

• Frost protection

• Ice and snow melting applications

Approvals:

Standard compliance

• EN/IEC 60730-1 (general)

• EN/IEC 60730-2-9 (thermostat)

Operation voltage 220 - 240 V, 50/60 Hz

Standby power consumption Max. 5 W

Resistive load Max. 16 A (3680 W) @ 230 V

Inductive load Max. 1 A, cos φ = 0,3

Hysteresis ± 0,2°C

Ambient temperature -10 °C to +30 °C

Frost protection 5 °C -

Cable specification max 1 x 4 mm2 or 2 x 2,5 mm

Ball pressure test temperature 75 °C

Pollution degree 2 (domestic use)

Controller type 1 C

Storage temperature -20 °C to +65 °C

IP class IP 30

Protection class

Dimensions (H/W/D) 82 x 82 x 36 mm

Weight 90 g

Class II -

Types

Item no. Product name Temp. range Sensor type Marking EAN no.

088L0030 ECte mp 130 5-45 °C

Room: 5-35 °C,

088L0032 E Ctemp 132

max. floor temp.: 20-50 °C

(default 35 °C)

Wire sensor, 3 m,

NTC 15 kOhm at 25 °C

Built-in room sensor and

wire sensor, 3 m,

NTC 15 kOhm at 25 °C

D130 5703 4 6 6126714

D132 5703466126738

2

Electrical heating · ©Danfoss AI281756090212en-010104

Connection schemes

1234

ECtem p 130 ECtem p 132

...5

(5...45 °C)

NTC

Room t°

sensor

1234

t°

Max. floor t°

NTC

Load

max. 16 A

LN

L

N

PE

230 V~

LN

t°

Load

max. 16 A

L

230 V~

t°

N

PE

AI281756090212en-010104Electrical heating · ©Danfoss