Danfoss ECpipeheat 10 V2 Data sheet

Data Sheet

YEAR

WARRANTY

Product specifications

Product

ECpipeheat 10 V2

The ECpipeheat 10 V2 is a self-limiting heating cable that is mainly used for frost protection
of pipes.

The self-limiting capability of the cable ensures that the output of the cable increase or
decrease according to ambient temperature.

The heating cables can be installed outside water pipes.

Note 1: The cable is not approved for installation inside the water pipe and for use in contact
with drinking water or water for human consumption, waste water, etc.

Note 2: It is the full responsibility of the installer/designer to use proper cold lead dimensioned for
the purpose and assembly sets that establish sufficient mechanical strength, flammability resist­ance and water tightness - and to design the heating unit with correct output for the specific
application to avoid overheating of the cable or building materials.

Benefits

• Cut to length on site

• Ready-made lengths

• Small cable dimentions

Approvals:

Standard compliance

• EN/IEC 60335-1:2012

• EN/IEC 62233:2008

Nominal voltage 230 V~
Nominal output (tolerance) 10 W/m @ 10 °C (8,5-13,5 W/m @ 10 °C )
Max. permissible use temperature, powered 65 °C

Max. permissible use temperature, unpowered 85 °C
Minimum installation temperature - 5 °C
Heating cable dimensions 7,7 mm × 5,3 mm
Outer sheath Blue, TPE
Minimum Screen Coverage 100% aluminium foil
Maximum resistance protective braid 18,2 Ω/Km
Bending radius, min. 25 mm (inside of the cable)
Cold lead with plug 2 m, 3 х 0,75 mm², Schuko plug
IP Class IPX7

Types: Ready-madу with Schuko plug

Ite m no. Typ e Cable length

088L0989 ECpipeheat 10 V2 with Schuko plug 2 m 20 W 5703466217818
088L0990 ECpipeheat 10 V2 with Schuko plug 4 m 40 W 5703466217825

088L0991 ECpipeheat 10 V2 with Schuko plug 6 m 60 W 5703466217832
088L0992 ECpipeheat 10 V2 with Schuko plug 8 m 80 W 5703466217849
088L0993 ECpipeheat 10 V2 with Schuko plug 10 m 100 W 5703466217856
088L0994 ECpipeheat 10 V2 with Schuko plug 12 m 12 0 W 5703466217863
088L0995 ECpipeheat 10 V2 with Schuko plug 14 m 140 W 5703466217870
088L0996 ECpipeheat 10 V2 with Schuko plug 16 m 160 W 5703466217887
088L0997 ECpipeheat 10 V2 with Schuko plug 19 m 19 0 W 5703466217894
088L0998 ECpipeheat 10 V2 with Schuko plug 22 m 220 W 5703466217900
088L0999 ECpipeheat 10 V2 with Schuko plug 25 m 250 W 5703466217917

Output

@ 10 °C 230 V

EAN no.

Types: Drum

Ite m no. Typ e

088L1001 ECpipeheat 10 V2 Blue 305 m drum 305 m 305 m 1 10 W/m 5703466217740

Electrical heating · ©Danfoss AI239086497815en-010104

Cable

length

Min-max length

per drum

Number of length
allowed per drum

Output

@ 10 °C 230 V

EAN no.

Maximum heating circuit length on a pipe, with circuit breaker with C-characteristic

Switch on

temperature

10 °C 100 m -

0 °C 96 m -

-20 °C 77 m -

ECpipeheat 10 V2

10 A 16 A

Power output characteristic

Output of heating cable installed and measured on a pipe.

W/m

40

35

30

25

20

15

10

5

0

0 10 20 30 40 50 60

ECpipeheat 10 V2

Pipe temperature (°C)

AI239086497815en-010104Electrical heating · ©Danfoss