Danfoss DM1x00 User guide
Technical Information
PLUS+1® Mobile Machine Displays
DM1x00 Series
www.danfoss.com
Technical Information
PLUS+1 DM1x00 Series Displays
Revision history Table of revisions
Date Changed Rev
October 2021 Minor typographical edits and statistical correction 0204
August 2021 Updated Machine wiring guidelings and LCD features 0203
December 2020 Corrected Pin Assignment tables 0202
December 2019 Under Pin assignments C1-C9, corrected tables for C5,C6, C7, and C8; and under DM1x00
Series Displays description, Dual core 1.2 GHz i.MX6 replaced with Dual core 800 MHz i.MX6
October 2019 First edition 0101
0201
2 | © Danfoss | October 2021 BC313277849405en-000204
Technical Information
PLUS+1 DM1x00 Series Displays
Contents
DM1x00 literature references
Technical Information (TI)............................................................................................................................................................. 4
Data Sheet (DS)................................................................................................................................................................................. 4
PLUS+1® GUIDE User Manual....................................................................................................................................................... 4
Latest version of technical literature.........................................................................................................................................4
User liability and safety statements
OEM responsibility........................................................................................................................................................................... 5
Safety statements.............................................................................................................................................................................5
Display operation guidelines..................................................................................................................................................5
Machine wiring guidelines...................................................................................................................................................... 7
Machine welding guidelines...................................................................................................................................................7
Overview
DM1x00 Series Displays description..........................................................................................................................................8
Features.......................................................................................................................................................................................... 8
PLUS+1® GUIDE..................................................................................................................................................................................8
LCD features....................................................................................................................................................................................... 9
Ordering information
Model variants.................................................................................................................................................................................10
Model code.......................................................................................................................................................................................10
Model code key...............................................................................................................................................................................10
Related products............................................................................................................................................................................11
Input/output types and specifications
Specifications...................................................................................................................................................................................12
Input types........................................................................................................................................................................................12
Digital/analog..................................................................................................................................................................................13
Multifunction inputs..................................................................................................................................................................... 13
CAN shield and analog input.....................................................................................................................................................16
Digital output.................................................................................................................................................................................. 16
CAN communication.....................................................................................................................................................................16
USB communication..................................................................................................................................................................... 17
RS232 communication.................................................................................................................................................................17
Sensor output..................................................................................................................................................................................17
Video power.....................................................................................................................................................................................17
Officially validated digital camera formats...........................................................................................................................17
Officially validated analog camera formats..........................................................................................................................18
Ethernet.............................................................................................................................................................................................18
Audio outputs................................................................................................................................................................................. 18
Wifi / Bluetooth...............................................................................................................................................................................19
Product ratings
DM1x00 environmental testing criteria.................................................................................................................................20
Supply voltage/maximum current ratings........................................................................................................................... 20
Ingress Protection (IP) rating .................................................................................................................................................... 21
Installation
DM1x00 Series Displays dimensions.......................................................................................................................................22
Button options................................................................................................................................................................................22
Pin assignments C1—C9............................................................................................................................................................. 23
Standard Mount..............................................................................................................................................................................25
Mounting panels cutouts............................................................................................................................................................26
RAM mount...................................................................................................................................................................................... 26
Fastening...........................................................................................................................................................................................26
Visibility and viewing radius...................................................................................................................................................... 27
Display faulty application recovery.........................................................................................................................................27
Cleaning............................................................................................................................................................................................ 27
©
Danfoss | October 2021 BC313277849405en-000204 | 3
Technical Information
PLUS+1 DM1x00 Series Displays
DM1x00 literature references
Reference literature
Literature title Literature type Literature number
DM1x00 Series PLUS+1® Mobile Machine Displays Technical Information BC313277849405
DM1x00 Series PLUS+1® Mobile Machine Displays Data Sheet AI304864913574
PLUS+1® GUIDE Software User Manual AQ152886483724
Technical Information (TI)
A TI is comprehensive information for engineering and service personnel to reference.
Data Sheet (DS)
A DS is summarized information and parameters that are unique to a specific model.
PLUS+1® GUIDE User Manual
The Operation Manual (OM) details information regarding the PLUS+1® GUIDE tool used in building PLUS
+1® applications. This OM covers the following broad topics:
How to use the PLUS+1® GUIDE graphical application development tool to create machine
•
applications
How to configure module input and output parameters
•
How to download PLUS+1® GUIDE applications to target PLUS+1® hardware modules
•
How to upload and download tuning parameters
•
How to use the PLUS+1® Service Tool
•
Latest version of technical literature
Comprehensive technical literature is online at www.danfoss.com
4 | © Danfoss | October 2021 BC313277849405en-000204
W
W
C
Technical Information
PLUS+1 DM1x00 Series Displays
User liability and safety statements
OEM responsibility
The OEM of a machine or vehicle in which Danfoss products are installed has the full responsibility for all
consequences that might occur. Danfoss has no responsibility for any consequences, direct or indirect,
caused by failures or malfunctions.
Danfoss has no responsibility for any accidents caused by incorrectly mounted or maintained
•
equipment.
Danfoss does not assume any responsibility for Danfoss products being incorrectly applied or the
•
system being programmed in a manner that jeopardizes safety.
All safety critical systems shall include an emergency stop to switch off the main supply voltage for
•
the outputs of the electronic control system. All safety critical components shall be installed in such a
way that the main supply voltage can be switched off at any time. The emergency stop must be easily
accessible to the operator.
Safety statements
Warning
Unintended movement of the machine or mechanism may cause injury to the technician or bystanders.
Improperly protected power input lines against over current conditions may cause damage to the
hardware. Properly protect all power input lines against over-current conditions. To protect against
unintended movement, secure the machine.
Warning
At high ambient temperatures the metal housing can become hotter than 70℃. Please use caution when
touching the metal housing of the display
Caution
Unused pins on mating connectors may cause intermittent product performance or premature failure. Be
sure to plug all pins on mating connectors.
Display operation guidelines
•
Disconnect your machine's battery power before connecting power and signal cables to the display.
•
Before doing any electrical welding on your machine, disconnect all power and signal cables
connected to the display.
•
Do not exceed the display power supply voltage ratings. Using higher voltages may damage the
display and can create a fire or electrical shock hazard.
•
Do not use or store the display where flammable gases or chemicals are present. Using or storing the
display where flammable gases or chemicals are present may cause an explosion.
•
Software configures the keypad buttons on the display. Do not use these buttons to implement
critical safety features. Use separate mechanical switches to implement critical safety features such as
emergency stops.
•
Design systems that use the display so that a communication error or failure between the display and
other units cannot cause a malfunction that might injure people or damage material.
•
The protective glass over the display screen will break if hit with a hard or heavy object. Install the
display to reduce the possibility of it being hit by hard or heavy objects.
•
Storing or operating a display in an environment that exceeds the display specified temperature or
humidity rating may damage the display.
©
Danfoss | October 2021 BC313277849405en-000204 | 5
Technical Information
PLUS+1 DM1x00 Series Displays
User liability and safety statements
•
Always clean the display with a soft, damp cloth. Use a mild dishwashing detergent as needed. To
avoid scratching and discoloring the display, do not use abrasive pads, scouring powders, or solvents
such as alcohol, benzene, or paint thinner.
•
Keep ambient light sensor area clean and uncovered for best operation.
•
Danfoss graphical displays are not user serviceable. Return the display to the factory in case of failure.
6 | © Danfoss | October 2021 BC313277849405en-000204
W
Technical Information
PLUS+1 DM1x00 Series Displays
User liability and safety statements
Machine wiring guidelines
•
Protect wires from mechanical abuse, run wires in flexible metal or plastic conduits.
•
Use 85˚ C (185˚ F) wire with abrasion resistant insulation and 105˚ C (221˚ F) wire should be
considered near hot surfaces.
•
Use a wire size that is appropriate for the module connector.
•
Separate high current wires such as solenoids, lights, alternators or fuel pumps from sensor and other
noise-sensitive input wires.
•
Run wires along the inside of, or close to, metal machine surfaces where possible, this simulates a
shield which will minimize the effects of EMI/RFI radiation.
•
Do not run wires near sharp metal corners, consider running wires through a grommet when
rounding a corner.
•
Do not run wires near hot machine members.
•
Provide strain relief for all wires.
•
Avoid running wires near moving or vibrating components.
•
Avoid long, unsupported wire spans.
•
Ground electronic modules to a dedicated conductor of sufficient size that is connected to the
battery (-).
•
Power the sensors and valve drive circuits by their dedicated wired power sources and ground
returns.
•
Twist sensor lines about one turn every 10 cm (4 in).
•
Use wire harness anchors that will allow wires to float with respect to the machine rather than rigid
anchors.
Machine welding guidelines
Warning
High voltage from power and signal cables may cause fire or electrical shock, and cause an explosion if
flammable gasses or chemicals are present.
Disconnect all power and signal cables connected to the electronic component before performing any
electrical welding on a machine.
The following is recommended when welding on a machine equipped with electronic components:
•
Turn the engine off.
•
Remove electronic components from the machine before any arc welding.
•
Disconnect the negative battery cable from the battery.
•
Do not use electrical components to ground the welder.
•
Clamp the ground cable for the welder to the component that will be welded as close as possible to
the weld.
©
Danfoss | October 2021 BC313277849405en-000204 | 7
Technical Information
PLUS+1 DM1x00 Series Displays
Overview
DM1x00 Series Displays description
The Danfoss DM1x00 display series bring modern appearance and performance to mobile machine
markets with two display platforms, expanding the PLUS+1® family.
The DM1x00 series was developed for best operator viewability with its high brightness, optical bonding,
anti-glare, anti-reflection, oleophobic coating and wide viewing angles. It is equipped with an
outstanding dual core 800 MHz i.MX6 processor and 4GB flash memory delivering high performance.
Ruggedized for mobile machine markets, it is built to withstand harsh operating environments with its
IP66 and IP67 rating and the water-resistant screen allowing for multi-touch while wearing gloves.
The integrated file viewer and media player provides view of documents and media files on the run using
the audio line out to connect to the vehicle speaker system.
To meet specific needs, the DM1x00 includes two different screen sizes (10.1” and 12.1”) with optional
multi-touch and two button pad configurations with programmable back-lights and tactile feedback.
WiFi and Bluetooth® provide wireless channels for servicing the machine remotely.
Features
•
4 CAN ports
•
RS232 and USB 2.0 high-speed
•
Ethernet
•
Bluetooth® and WiFi, GNSS (optional)
•
4 Camera inputs (Up to 2 displayed at one time)
•
Audio line out
•
Sensor supply out
•
Optional keypad with either 8 buttons on each side (16 total) or 8 buttons plus navigation panel (16
total)
•
Backlit buttons
•
Touch screen (optional)
•
Optical signal (2 RGB LEDs)
•
Integrated ambient light sensor for automatically adjusting brightness to lighting conditions
•
Ignition input
•
Wake up over input
•
Dual core 800 MHz i.MX6
4 GB Flash memory
‒
•
Media player and File viewer (PDF, JPG, MP3, MP4)
•
PLUS+1® GUIDE programmable
•
Real Time Clock (RTC)
•
Rugged IP66 and IP67 rating
•
2 Integrated DEUTSCH connectors
•
Fast Start-up Time (less than 5 seconds)
•
RAM® or Bracket (optional) mount (portrait or landscape)
•
Integrated accelerometer for auto-adjusting between screen orientations
•
32 MB App Log
PLUS+1® GUIDE
PLUS+1® GUIDE (Graphical User Integrated Development Environment) is a complete toolbox that
generates downloadable applications for all programmable PLUS+1® Compliant products.
A screen editor allows easy development of applications by programmers without formal software
development training. The expertise from a software engineer is not needed to find your way around in
PLUS+1® GUIDE.
8 | © Danfoss | October 2021 BC313277849405en-000204
C
Technical Information
PLUS+1 DM1x00 Series Displays
Overview
Caution
Unwanted system failure may occur.
Refer to PLUS+1® GUIDE Software User Manual, AQ152886483724 for best programming practices.
https://www.danfoss.com/en/products/software/dps/plus1-software/plus1-guide/#tab-overview
LCD features
DM1000 LCD 10.1" screen
Description Value. Unit Notes
Screen Size 10.1 Inch
Resolution 1280 x 800 Pixels
Brightness 900 cd/m2 Value includes cover glass
Contrast Ratio 500:1
Viewing Angle ± 85 Degree vertical and horizontal
Color Depth 24 Bits 8 bits per color
DM1200 LCD 12.1" screen
Description. Value. Unit. Notes.
Screen Size 12.1 Inch
Resolution 1280 x 800 Pixels
Brightness 900 cd/m2 Value includes cover glass
Contrast Ratio 500:1
Viewing Angle ± 85 Degree vertical and horizontal
Color Depth 24 Bits 8 bits per color
©
Danfoss | October 2021 BC313277849405en-000204 | 9
Loading...