Danfoss Chrome plated compression fittings Data sheet
Data Sheet
Chrome plated compression fittings for X-tra
Collection™
Application,
chrome plated fittings
Ordering and
technical data
Chrome plated
compression fitting
for PEX tubing
Chrome plated compression fittings
for design valves DN 15
Chrome plated
compression fitting
for AluPEX tubing
Maximum operating pressure and temperature are given by the tubing manufacturer.
compression fitting for
steel and copper tubing
However,
Danfoss chrome plated compression fittings
are only for connection of Danfoss valves to
the values stated in this data sheet must not
be exceeded.
circuits in heating systems.
One set consists of one olive and one union
Compression fittings are used for connecting
steel and copper pipes in accordance with
nut. Sets for AluPEX and PEX also includes a
supporting bush.
DIN EN 10305-1 & DIN EN 1057 as well as for
AluPEX and PEX plastic tubings in accordance with DIN 16892/16893.
Connection
for steel and
copper tubing
for AluPEX tubing 16 x 2 mm 013G4200 6 bar 10 bar 95 ˚C
for PEX tubing
Tube
dimension
10 mm 013G4192
12 mm 013G4193
14 mm 013G4194
15 mm 013G4195
16 mm 013G4196
12 x 1.1 mm 013G4197
16 x 2 mm 013G4198
Code no.
Max. work
pressure
10 bar 16 bar 120 ˚C
6 bar 10 bar 95 ˚C15 x 2,5 mm 013G4199
Test
pressure
Max. flow
temp.
Chrome plated
For:
RA-NCX, RA-URX,
RLV-CX, VHX,
VHS-FX, VHS-RX
VDVKC302 © Danfoss 08/2016
1
Data Sheet Compression fittings in chrome - for X-tra Collection™
Application,
nickel plated fittings
Ordering
Nickel plated compression fittings (alternative to chrome plated)
Danfoss nickel plated compression fittings
are only for connection of Danfoss valves to
circuits in heating systems.
Compression fittings are used for connecting
steel and copper pipes in accordance with
DIN EN 10305-1 & DIN EN 1057 as well as for
AluPEX and PEX plastic tubings in accordance with DIN 16892/16893.
Connection
for steel and
copper tubing
for AluPEX tubing
for PEX tubing
Tube
dimension
8 mm 013G4108
10 mm 013G4110
12 mm 013G4112
14 mm 013G4114
15 mm 013G4115
16 mm 013G4116
12 x 2 mm 013G4172
14 x 2 mm 013G4174
16 x 2 mm 013G4176
12 x 1.1 mm 013G4143
12 x 2 mm 013G4142
14 x 2 mm 013G4144
15 x 2.5 mm 013G4147
16 x 2 mm 013G4146
Code no.
Maximum operating pressure and temperature are given by the tubing manufacturer.
However,
the values stated in this data sheet must not
be exceeded.
One set consists of one olive and one union
nut. Sets for AluPEX and PEX also includes a
supporting bush.
Max. work
pressure
10 bar 16 bar 120 ˚C
6 bar 10 bar 95 ˚C
6 bar 10 bar 95 ˚C
Test
pressure
Max. flow
temp.
For:
RA-URX, RLV-X,
VHX, VHS-FX,
VHS-RX, FJVR 15,
RA-N 15, RA-UN 15,
RLV 15, lance valves
Danfoss A/S
Heating Solutions
Haarupvaenget 11
8600 Silkeborg
Denmark
Phone: +45 7488 8000
Fax: +45 7488 8100
e-mail: heating.solutions@danfoss.com
www.heating.danfoss.com
2
VDVKC302 © Danfoss 08/2016
Loading...