Danfoss Automotive on PLUS 1 Data sheet

Data Sheet

Automotive on PLUS+1

For more than 40 years, Danfoss has been developing state-of-the-art components and systems for mobile machinery used in off-highway operations around the world.

The new Automotive on PLUS+1® application software is designed for a single path propel system. Through the easy parameter configuration it enables faster time-to-market and improved performance and functionality for both new machine designs and model variants.

Features

Complete propel drive system functionality

•

PLUS+1® Service Tool configurable for custom drive behavior

•

Independent pump/motor profiling & ramping

•

Multiple individually configurable propel drive modes:

•

Automotive (command signal to pump engine RPM dependent)

•

Non-Automotive (command signal to pump by pedal or joystick)

•

Creep automotive (combination of

‒

both above)

Advanced functions

•

Electronic drive and Inch function

•

Engine antistall

•

Constant speed drive control

•

Vehicle speed limiter

•

Engine and motor overspeed protection

•

Engine speed dependent output (Retarder Control)

•

Option: J1939 CAN communication enabling component to component and service tool/ laptop communication via gateway

•

24 pins: (2) individually keyed • DEUTSCH DTM 12 pin connectors

•

12 or 24 Vdc power supply, monitored internally

•

Power supply for external sensors rated at 5 Vdc to 200 mA regulated internally

Inputs

•

2 analog for drive & Inch Pedal

•

4 digital for FNR & Mode selection

•

2 frequency for Pump & Hydromotor speed

Outputs

•

2 PWM outputs (3A) for Pump displacement control (NFPE & EDC)

•

1 PWM output (3A) for proportional or pressure controlled Hydromotors

•

1 digital output (3A) for Brake Pressure defeat

•

4 digital outputs for Auxilliary functions like brake light, Retarder etc.

Related product part numbers

CG150 CAN/USB Gateway 11153051 DEUTSCH mating connector

assembly bag (16 to 20 AWG) DEUTSCH mating connector

assembly bag (20 to 24 AWG)

10102023

10100945

Danfoss can accept no responsibility for possible errors in catalogues, brochures and other printed material. Danfoss reserves the right to alter its products without notice. This also applies to products already on order provided that such alterations can be made without changes being necessary in specifications already agreed. All trademarks in this material are property of the respective companies. Danfoss and the Danfoss logotype are trademarks of Danfoss A/S. All rights reserved.