Danfoss AB-PM, AB PM HP Operating guide [ar]

Operating Guide

AB-PM/AB PM HP (DN 10-32)

TWA-Z/ABN A5

IP 41/IP 54

SW 8

© Danfoss | 2016/01

VI.A7.F2.00/73693830 | 1

Danf
already on order pro
All trademarks in this material are property of the respec

AB-PM/AB-PM HP (DN 10-32)

Manual Shut-o-plastic

Included with all AB-PM valves

∆p max = 1 bar

Code No.:

003Z0250

Flow Direction

0%

∞

Clockwise: Close
Counter-Clockwise: Open

Code No.:

003L50 42

(included in
package)

Mounting actuator

Assembly

Locking

M

*

max

DN

To pipe L (mm) Code No.

10* R ⁄ 26 003Z0231 17 065Z7016

15 R ⁄ 27.5 003Z0232 37 003Z0226 22 065Z7017
20 R ⁄ 30.5 003Z0233 42 003Z0227
25 R 1 35 003Z0234 42 003Z0228
32 R 1 ⁄ 38.5 003Z0235 42 003Z0229

* M

for DN 10 is 35 Nm

max

Weld.c.

Code No.

L (mm) L (mm)

L

Solder.c.

Setting

100%

≠

h

10%

h+ 2 mm, DN 10-20
h+ 4 mm, DN 25-32

Code No.

oss can accept no responsibility for possible errors in catalogues, brochures and other printed material. Danfoss reserves the right to alter its products without notice. This also applies to products

vided that such alterations can be made without subsequential changes being necessary eady agreed.

2 | © Danfoss | DHS-SRMT/SI | 2016/01

1.5 mm

tive companies. Danfoss and the Danfoss logotype are trademarks of Danfoss A/S. All rights reserved.

VI.A7.F2.00/73693830