Daktronics All Sport 5000 Quick Start Guide

All Sport 5000 Series Console Quick Start Guide 1 of 4

201 Daktronics Drive PO Box 5128, Brookings, SD 57006-5128

Tel: 1-800-DAKTRONICS (1-800-325-8766) Fax: [phone]

Web: www.daktronics.com/allsportsupport

DD2077845 Rev 1

26 July 2012

This guide will assist with starting up and operating an All Sport 5000 series scoreboard controller. For more detailed console operation and configuration,
refer to the All Sport 5000 Series Control Console Operations Manual (ED-11976), available online at www.daktronics.com/allsportsupport.

Horn
Control

Clock

Control

Menu

Navigation

Number
Keypad

Sport-Specific Insert

LCD

LCD

This screen displays current game information and menu choices.

Number Keypad

 0-9 – Use these keys to enter scoring and statistical values.
 ENTER * YES – This key has two functions:

o Press to complete an action.
o Press to answer “YES” for input prompts (Y).

 CLEAR / NO – This key has two functions:

o Press to clear the LCD of numerical information.
o Press to answer “NO” for input prompts (N).

Menu Navigation

 MENU – Press to select from a list of standard and sport-specific options.

o Use and to scroll through the menus.
o Use and to enter and exit submenu lists.
o Refer to the Operations Manual for the menu settings of each sport.

 EDIT – Press this key followed by one of the sport-specific scoring

keys to modify the current value. Simply enter the new value using
the number keypad and then press <ENTER>.

Clock Control

 START – Press to start the main clock. A green LED on the key

illuminates while the main clock is running.

 STOP – Press to stop the main clock.
 SET MAIN CLOCK – After the main clock has been stopped, press

this key to display the current time of the main clock.

o Enter the desired time using the number keypad and then press

<ENTER> to set the clock.

o Press <CLEAR> twice to cancel the changes and return to the game.
o Refer to Section 2.5 of the Operations Manual for more information.

 COUNT UP/DOWN – After the main clock has been stopped, press

this key to set the direction of the clock.

o Press <1> or <2> to select UP or DOWN (default).
o The current direction of the main clock is shown on the top line of

the LCD with an ↓ or ↑.

Horn Control

 AUTO HORN – Press this key to enable/disable the automatic horn.

o Press <1> or <2> to select ON (default) or OFF. An amber LED on

the <HORN> key illuminates when the Auto Horn is enabled.

o If the Auto Horn is ON (the LED is on) the horn will automatically

go off when the clock reaches “00:00”.

 HORN – Press to sound the main horn, if the scoreboard is equipped

with one. The horn sounds as long as the key is held.

Sport-Specific Insert

This shows keys specific to a sport. Refer to Page 3 for more information.

All Sport 5000 Series Console Quick Start Guide 2 of 4

201 Daktronics Drive PO Box 5128, Brookings, SD 57006-5128

Tel: 1-800-DAKTRONICS (1-800-325-8766) Fax: [phone]

Web: www.daktronics.com/allsportsupport

DD2077845 Rev 1

26 July 2012

NNNN = last code selected

NNNN = current code entered

X = current broadcast group
YY = current radio channel

V = version and revision number
ED = standard software number

Radio Settings in Clock Digits

AS-5 000 VX. X.X
ED-1 1544

PR EV COD E NNNN
RE SUME GAME?

SE LECT CODE
CO DE NNN N

RA DI O SETT I NGS
BC AST X CHA N YY

Start Up

1. Plug power cord into a 120 (or 230) VAC outlet.

2. Connect all signal cables to their appropriate jacks, if they are not

already connected. Wireless radio systems may not require these
signal connections. Refer to scoreboard installation manuals
and/or site-specific System Riser Diagrams for more information.

3. Slide a sport insert into the sleeve over the keypad (see Page 3).

4. Turn power switch S1 on rear of console to the ON position.

5. The console will perform a self-test when it is powered on.

During the self-test, a message will display the version of the
standard software loaded in the console:

6. When the self-test completes, a prompt displays the code number

for the last game played. This is useful when power to the console
is lost during a game.

 Press <YES> to resume the last game stored in memory.

The console is now ready for game operation.

 Press <NO> to start a new game or change sports. The console

will prompt for a new code number as shown below.

Use the number keypad to enter the new sport code, and then
press <ENTER>. Sport codes can be found on the sport-specific
insert and in the Operations Manual. Refer also to Page 3.

Radio Settings

If the radio option is installed, the console will also prompt for
the radio settings after changing the sport code. Press <ENTER>
to accept the current settings or press <CLEAR> to modify them.

The radio settings in the console (transmitter) must match
the settings in the scoreboard (receiver). By default, both are
set to Broadcast Group 1, Channel 01.

To determine the settings of a scoreboard, first power it
down and shut off any radio-equipped consoles in the area.
Next, power the scoreboard back up and watch for the radio
settings. The settings will appear as “bX CY” where X is the
current broadcast group and Y is the current channel:

The settings are typically displayed in the clock digits or Home
and Guest score digits, depending on the scoreboard model.

Refer to Section 2.4 of the Operations Manual for more
information on radio settings.