Daikin SLM9 Operation manuals

OPERATING MANUAL

MON

TUE WED THU

AUTO

OVERRIDE

OFF

AUTO COOL HEAT FAN

SWING

TURBO

TIMER

ON OFF

ROOM TEMP. SET TEMP.

SLEEP

SWING QUIET

TIMER

MODE

DELAY TIMER

DRY

TURBO QUIET

FAN ON / OFF

FRI SAT SUN ALL

12 12

Operating Manual

AM PM

F C

SLEEP

Handset Wireless

Användarmanual

Trådlöst handset

English

Svenska

OM-SLM9-0911(2)-DAIKIN

Part No.: R08019037014B

Battery

1) Type: AAA.R03

2) Quantity: 2 pieces

Disposal Requirements

Waste batteries must be treated at a specialized treatment facility for re-use. By ensuring correct disposal, you will help to prevent potential negative consequences for the environment and human health. Please contact your local authority for more information.

[For European Union (EU) only] The batteries supplied with the controller are marked with this symbol. This means that the batteries shall not be mixed with unsorted household waste. If a chemical symbol is printed beneath the symbol, this chemical symbol means that the battery contains a heavy metal above a certain concentration. Possible chemical symbols are:  Pb: lead (>0,004%)

Batteri

1) Typ: AAA.R03

2) Kvantitet: 2 delar

Avfallshanteringskrav

Avfallsbatterier måste behandlas vid en specialiserad behandlingsanläggning för återanvändning. Genom att säkra en korrekt avyttring hjälper du till att förhindra möjliga negativa konsekvenser för miljön och den mänskliga hälsan. Var god kontakta din lokala myndighet för mer information.

[För Europeiska Unionen (EU) endast] De batterier som medföljer kontrollen är märkta med denna symbol. Detta betyder att batterierna inte får blandas med osorterat hushållsavfall. Om en kemisk symbol är tryckt nedanför symbolen betyder denna kemiska symbol att batteriet innehåller en tung metall ovanför en viss koncentration. Möjliga kemiska symboler är:  Pb: bly (>0,004 %)

SLM9 Controller Indication

MON

TUE WED THU

SLEEP

ON OFF

ROOM TEMP. SET TEMP.

FRI SAT SUN ALL

12 12

AM PM

F C

AUTO

DRY

AUTO COOL HEAT FAN

TURBO QUIET

SWING

OVERRIDE

3 2

MODE

DELAY

TIMER

TURBO

TIMER

ON OFF

SWING QUIET

TIMER

SLEEP

FAN ON / OFF

4 5

6 7

12 13

NO KEY FUNCTION

MODE Select operating Modes control (Cool/ Heat/ Auto/ Dry/ Fan)

TURBO Activate/deactivate Turbo function

SWING Activate/deactivate Swing control

Hold Key to change Swing Mode

QUIET Activate/deactivate Quiet function

SET TEMP UP Increase set temperature in °C or °F

SET TEMP DOWN Decrease set temperature in °C or °F

SLEEP Activate/deactivate Sleep function

OFF TIMER Enable/disable the Event 1 and 2 OFF TIMER setting mode

ON TIMER Enable/disable the Event 1 and 2 ON TIMER setting mode

DELAY TIMER Activate/deactivate delay timer

10.

FAN Select Fan speeds control (Auto/ High/ Med/ Low)

11.

ON/OFF On/Off the unit with overriding all the timer settings

12.

REAL TIME CLOCK (RTC) Enable/disable the Real Time Clock (RTC) setting mode

13.

NOTE: Turbo and quiet function are for selected models only.

OPERATING INSTRUCTION

1.1 MODE Button

Press the MODE button to switch operation from COOL, HEAT*, AUTO*, DRY*, FAN. Check the display to see in which mode the control is set. *HEAT, AUTO and DRY are available for selected models only.

1.2 TURBO Fan Speed

Press the TURBO key once to activate Turbo fan speed. Turbo symbol will be shown. To disable Turbo fan speed and back to previous fan speed, press the Turbo key once again. If user presses the FAN button or QUIET button or turn off the unit, the turbo speed will be disabled. This speed is only valid during COOL and HEAT mode for selected models.

1.3 Automatic air swing

• Press the SWING button to activate the automatic air swing function.

• To distribute the air to a specific direction, press the SWING button and wait until the louver move to the desired direction and press the button once again.

Swing mode selection method (for cassette E model)

• Press SWING ( ) button for 4 seconds to enter field setting mode. While in field setting mode, it will only show SWING MODE ( ).

• Press temperature and button to select SWING MODE ( ) rotation from Swing Mode 1 to Swing Mode 3.

• There are 3 different SWING MODE, which are:

Swing mode 1 Swing mode 2 Swing mode 3

SWING MODE will not activate unless SWING is activated. Swing is indicated by the logo:

•

If no mode changes within 4 seconds, unit will operate according to the selected SWING MODE ( ).

1.4 QUIET Fan Speed

Press the QUIET key once to activate Quiet fan speed. QUIET symbol will be shown. To disable Quiet fan speed and back to previous fan speed, press the QUIET key again. If user presses the FAN button or TURBO button or turn off the unit, the quiet speed will be disabled. This speed is only valid during COOL and HEAT mode for selected models.

1.5 “ ” or “ ” Set Temperature Button

Press the temperature button and set the temperature of your choice by pressing “ ” or “ ” button once, temperature changes by 1°C or 1°F. The default temperature setting range is from 16°C to 30°C (60°F to 86°F). When the Option 20 - 30ºC is set, the temperature range limit is set to 20ºC to 30ºC (68°F to 86°F). Pressing both keys simultaneously will toggle the temperature setting between ºC and ºF. No temperature setting is allowed during FAN mode (No set temp display). There is no room temperature display.

1.6 SLEEP Function

Press the SLEEP button to activate the sleep mode. SLEEP function is not available in DRY mode and FAN mode.

1.7 “ON TIMER” and “OFF TIMER”

The unit has 2-event timer, namely Timer 1 and Timer 2, each event has an ON TIMER and an OFF TIMER. The key press activity for Timer ON and Timer OFF is shown on Table 1.1

ENGLISH

Original Instruction

Table 1.1: Timer ON and Timer OFF key press and event sequence.

TIMER ON KEY TIMER OFF KEY

ON Timer 1 ON Timer 2 OFF Timer 1 OFF Timer 2

Deactivated Deactivated Deactivated Deactivated

Activated Deactivated Activated Deactivated

Deactivated Activated Deactivated Activated

Activated Activated Activated Activated

All timers are event-triggered timers and can be overridden by the ON/OFF button and Override function.

Set Event 1 and Event 2 Timers

Process for Timer ON and Timer OFF is the same.

1. Press and hold Timer ON/OFF key for 3 seconds to go into timer setting mode. (Icon ON 1 or OFF 1 will blink)

2. Press UP or DOWN to select Timer 1 or Timer 2 to set. (‘1’ blinking indicate that Timer 1 is currently selected, ‘2’ blinking indicate that Timer 2 is currently selected)

3. Press Timer ON/OFF key again to confirm. (Day will blink next)

4. Press UP or DOWN to select the day.

5. Press Timer ON/OFF key again to confirm the day. (Hour will blink next)

6. Press UP or DOWN to change the hour.

7. Press Timer ON/OFF key again to confirm the hour. (Minute will blink next)

8. Press UP or DOWN to change the minute.

9. Press Timer ON/OFF key again to confirm the minute.

Each timer (Timer 1 ON or Timer 1 OFF or Timer 2 ON or Timer 2 OFF) will only be set separately

after all 7 steps, if there is no key operation for 5 seconds during setting the timer, it will automatically exits from setting mode and no changes will be made.

ON/OFF timer will be checked every 1 minute.

It is not advisable to set ON TIMER and OFF TIMER to have same values. Shall these occur, the effective timer will be treated with priority as stated in Table 1.2.

Example:

ON TMR 2 settings: DAY – TUE, TIMER – 5.00pm OFF TMR 1 settings: DAY – TUE, TIMER – 5.00pm Outcome when RTC reaches 5.00pm on TUE:

– when unit is on, no respond. – when unit is off, unit will trigger to on.

Table 1.2: Timer Priority

Priority Timer

1 (Highest) ONTMR2 2 OFFTMR2 3 ONTMR1 4 (Lowest) OFFTMR1

Upon IR reception, IR wireless remote controller will override ON TIMER 2 and OFF TIMER 2 settings.

+ 14 hidden pages