Daikin RYP125L7W1 user guide manual

INSTALLATION MANUAL

Split System air conditioners

RP71L7V1
RP100L7V1

RP71L7W1
RP100L7W1
RP125L7W1

RYP71L7V1
RYP100L7V1

RYP71L7W1
RYP100L7W1
RYP125L7W1

D2D2

L1

L2

B1

B2

D2D2

L1

L2

H1

H2

L4L1

L3

L2

1

B2

B2

D2

D2D2

EE

L1

L1

CC

L2

L2

AA

D1D1D1

HH

B1B1B1

1

B2B2B2

D2D2

D2

EE

L1

CC

L2

L2

AA

1

D1D1D1

L1

HH

B1

B1

1

2

4

3

L2

2

L1

H1

H1

2

3

L3L1

H2

4

5

B

E

A

C

H

D

6

5

6

7

7

8

8

NOTES

CE - DECLARATION-OF-CONFORMITY
CE - KONFORMITÄTSERKLÄRUNG
CE - DECLARATION-DE-CONFORMITE

CE - CONFORMITEITSVERKLARING

CE - DECLARACION-DE-CONFORMIDAD

CE - DICHIARAZIONE-DI-CONFORMITA

CE - ¢H§ø™H ™YMMOPºø™H™

CE - DECLARAÇÃO-DE-CONFORMIDADE

CE - OPFYLDELSESERKLÆRING

CE - FÖRSÄKRAN-OM-ÖVERENSTÄMMELSE

CE - ERKLÆRING OM-SAMSVAR

CE - ILMOITUS-YHDENMUKAISUUDESTA

Daikin Europe N.V.

declares under its sole responsibility that the air conditioning models to which this declaration relates:
erklärt auf seine alleinige Verantwortung daß die Modelle der Klimageräte für die diese Erklärung bestimmt ist:
déclare sous sa seule responsabilité que les appareils d'air conditionné visés par la présente déclaration:

verklaart hierbij op eigen exclusieve verantwoordelijkheid dat de airconditioning units waarop deze verklaring betrekking heeft:
declara baja su única responsabilidad que los modelos de aire acondicionado a los cuales hace referencia la declaración:
dichiara sotto sua responsabilità che i condizionatori modello a cui è riferita questa dichiarazione:

‰ЛПТУВИ МВ ·ФОПВИЫЩИО‹ ЩЛ˜ В˘ı‡УЛ fiЩИ Щ· МФУЩ¤П· ЩˆУ ОПИМ·ЩИЫЩИОТУ Ы˘ЫОВ˘ТУ ЫЩ· ФФ›· ·У·К¤ЪВЩ·И Л ·ЪФ‡Ы· ‰‹ПˆЫЛ:

declara sob sua exclusiva responsabilidade que os modelos de ar condicionado a que esta declaração se refere:
erklærer under eneansvar, at klimaanlægmodellerne, som denne deklaration vedrører:

deklarerar i egenskap av huvudansvarig, att luftkonditioneringsmodellerna som berörs av denna deklaration innebär att:
erklærer et fullstendig ansvar for at de luftkondisjoneringsmodeller som berøres av denne deklarasjon innebærer at:
ilmoittaa yksinomaan omalla vastuullaan, että tämän ilmoituksen tarkoittamat ilmastointilaitteiden mallit:

RP71L7V1, RP71L7W1,
RYP71L7V1, RYP71L7W1,
RP100L7V1, RP100L7W1,
RYP100L7V1, RYP100L7W1,
RP125L7W1, RYP125L7W1,

are in conformity with the following standard(s) or other normative document(s), provided that these are used in accordance with our instructions:
der/den folgenden Norm(en) oder einem anderen Normdokument oder -dokumenten entspricht/entsprechen, unter der Voraussetzung, daß sie gemäß unseren Anweisungen eingesetzt werden:
sont conformes à la/aux norme(s) ou autre(s) document(s) normatif(s), pour autant qu'ils soient utilisés conformément à nos instructions:

conform de volgende norm(en) of één of meer andere bindende documenten zijn, op voorwaarde dat ze worden gebruikt overeenkomstig onze instructies:
están en conformidad con la(s) siguiente(s) norma(s) u otro(s) documento(s) nor mativo(s), siempre que sean utilizados de acuerdo con nuestras instrucciones:
sono conformi al(i) seguente(i) standard(s) o altro(i) documento(i) a carattere normativo, a patto che vengano usati in conformità alle nostre istruzioni:

В›У·И Ы‡МКˆУ· МВ ЩФ(·) ·ОfiПФ˘ıФ(·) ЪfiЩ˘Ф(·) ‹ ¿ППФ ¤ББЪ·КФ(·) О·УФУИЫМТУ, ˘fi ЩЛУ ЪФ¸fiıВЫЛ fiЩИ ¯ЪЛЫИМФФИФ‡УЩ·И Ы‡МКˆУ· МВ ЩИ˜ Ф‰ЛБ›В˜ М·˜:

estão em conformidade com a(s) seguinte(s) norma(s) ou outro(s) documento(s) normativo(s), desde que estes sejam utilizados de acordo com as nossas instruções:
overholder følgende standard(er) eller andet/andre retningsgivende dokument(er), forudsat at disse anvendes i henhold til vore instrukser:

respektive utrustning är utförd i överensstämmelse med och följer följande standard(er) eller andra normgivande dokument, under förutsättning att användning sker i överensstämmelse med våra instruktioner:
respektive utstyr er i overensstemmelse med følgende standard(er) eller andre normgivende dokument(er), under forutssetning av at disse brukes i henhold til våre instrukser:
vastaavat seuraavien standardien ja muiden ohjeellisten dokumenttien vaatimuksia edellyttäen, että niitä käytetään ohjeidemme mukaisesti:

EN60335-2-40,

following the provisions of: Directives, as amended.
gemäß den Vorschriften der: Direktiven, gemäß Änderung.
conformément aux stipulations des: Directives, telles que modifiées.

overeenkomstig de bepalingen van: Richtlijnen, zoals geamendeerd.
siguiendo las disposiciones de: Directivas, según lo enmendado.
secondo le prescrizioni per: Direttive, come da modifica.

Ì ًÚËÛË Ùˆv ‰È·Ù¿Íˆv Ùˆv: √‰ËÁÈÒv, fiˆ˜ ¤¯Ô˘Ó ÙÚÔÔÔÈËı›.

de acordo com o previsto em: Directivas, conforme alteração em.

Electromagnetic Compatibility 89/336/EEC *

Low Voltage 73/23/EEC

Machinery Safety 98/37/EEC

under iagttagelse af bestemmelserne i: Direktiver, med senere ændringer.
enligt villkoren i: Direktiv, med företagna ändringar.

gitt i henhold til bestemmelsene i: Direktiver, med foretatte endringer.
noudattaen määräyksiä: Direktiivejä, sellaisina kuin ne ovat muutettuina.

* Note as set out in the Technical Construction File DAIKIN.TCF.016 and judged positively by KEMA according to the Certificate 81728-KRQ/ECM98-4341 .

Hinweis wie in der Technischen Konstruktionsakte
Remarque tel que stipulé dans le Fichier de Construction Technique
Bemerk zoals vermeld in het Technisch Constructiedossier
Nota tal como se expone en el Archivo de Construcción Técnica
Nota delineato nel File Tecnico di Costruzione

™ËÌ›ˆÛË fiˆ˜ ÚÔÛ‰ÈÔÚ›˙ÂÙ·È ÛÙÔ ∞Ú¯Â›Ô ∆¯ÓÈ΋˜ ∫·Ù·Û΢‹˜

DAIKIN.TCF.016 aufgeführt und von KEMA positiv ausgezeichnet gemäß

Zertifikat 81728-KRQ/ECM98-4341 .

DAIKIN.TCF.016 et jugé positivement par KEMA conformément au Certificat 81728-KRQ/ECM98-4341 .

DAIKIN.TCF.016 en in orde bevonden door KEMA overeenkomstig Certificaat 81728-KRQ/ECM98-4341

DAIKIN.TCF.016 y juzgado positivamente por

DAIKIN.TCF.016 e giudicato positivamente da

KEMA secondo il Certificato 81728-KRQ/ECM98-4341 .

DAIKIN.TCF.016 Î·È ÎÚ›ÓÂÙ·È ıÂÙÈο ·fi ÙÔ

KEMA según el Certificado 81728-KRQ/ECM98-4341 .

KEMA Û‡Ìʈӷ Ì ÙÔ ¶ИЫЩФФИЛЩИОfi 81728-KRQ/ECM98-4341 .

.

Nota tal como estabelecido no Ficheiro Técnico de Construção DAIKIN.TCF.016 e com o parecer positivo de KEMA de acordo com o Certificado 81728-KRQ/ECM98-4341 .
Bemærk som anført i den Tekniske Konstruktionsfil
Information utrustningen är utförd i enlighet med den Tekniska Konstruktionsfilen DAIKIN.TCF.016 som positivt intygas av KEMA vilket också framgår av Certifikat 81728-KRQ/ECM98-4341

DAIKIN.TCF.016 og positivt vurderet af KEMA i henhold til Certifikat 81728-KRQ/ECM98-4341

.

.
Merk som det fremkommer i den Tekniske Konstruksjonsfilen DAIKIN.TCF.016 og gjennom positiv bedømmelse av KEMA ifølge Sertifikat 81728-KRQ/ECM98-4341 .
Huom jotka on esitetty Teknisessä Asiakirjassa

DAIKIN.TCF.016 ja jotka KEMA on hyväksynyt Sertifikaatin 81728-KRQ/ECM98-4341 mukaisesti .

Katsuyuki Sawai
Assistant Director Quality Assurance
Ostend, 2nd of December 2002

Zandvoordestraat 300, B-8400 Oostende, Belgium

3PW14488-1A

RP71L7V1 RP71L7W1 RYP71L7V1 RYP71L7W1
RP100L7V1 RP100L7W1 RYP100L7V1 RYP100L7W1

RP125L7W1 RYP125L7W1

■

■

■

Split System air conditioners

■

■

■

■

■

■

Installation manual

ONTENTS

C

Safety Considerations........................................................................1

Before installation.............................................................................. 2

Selecting installation site ................................................................... 2

Precautions on installation................................................................. 3

Installation servicing space ............................................................... 4

Refrigerant pipe size and allowable pipe length................................ 4

Precautions on refrigerant piping....................................................... 5

Refrigerant Piping.............................................................................. 5

Evacuating......................................................................................... 7

Charging refrigerant........................................................................... 8

Electrical wiring work......................................................................... 9

Test operation.................................................................................. 10

Disposal requirements..................................................................... 11

Wiring diagram ................................................................................12

READ THESE INSTRUCTIONS CAREFULLY BEFORE
INSTALLATION. KEEP THIS MANUAL IN A HANDY
PLACE FOR FUTURE REFERENCE.

IMPROPER INSTALLATION OR ATTACHMENT OF
EQUIPMENT OR ACCESSORIES COULD RESULT IN
ELECTRIC SHOCK, SHORT-CIRCUIT, LEAKS, FIRE OR
OTHER DAMAGE TO THE EQUIPMENT. BE SURE ONLY
TO USE ACCESSORIES MADE BY DAIKIN WHICH ARE
SPECIFICALLY DESIGNED FOR USE WITH THE
EQUIPMENT AND HAVE THEM INSTALLED BY A
PROFESSIONAL.

IF UNSURE OF INSTALLATION PROCEDURES OR USE,
ALWAYS CONTACT YOUR DAIKIN DEALER FOR ADVICE
AND INFORMATION.

S

AFETY

The precautions listed here are divided into the following two types.
Both cover very important topics, so be sure to follow them carefully.

C

ONSIDERATIONS

WARNING If the warning is not observed, it may

cause serious casualties.

CAUTION If the caution is not observed, it may

cause injury or damage to the equipment.

age

P

For year round cooling applications with low indoor
humidity conditions contact your dealer or see Engineering
databook or service manual.

WARNING

Ask your dealer or qualified personnel to carry out
installation work
yourself.
Improper installation may result in water leakage,
electric shocks or fire.

■

Perform installation work in accordance with this
installation manual.
Improper installation may lead to water leakage,
electric shocks or fire.

■

When a unit is installed in a small room, it is
necessary to take measures so that the leaked
refrigerant amount does not exceed the limit even if it
leaks. As for the measures to prevent the leak from
not exceeding the limit, please consult with your
distributor.
If the leaked amount exceeds the limit, it may cause
an oxygen deficiency accident.

Be sure to use only the specified accessories and
parts for installation work.
Failure to use the specified parts may result in water
leakage, electric shocks, fire, or the unit falling.

Install the air conditioner on a foundation that can
withstand its weight.
Insufficient strength may result in the fall of equipment
and causing injury.

■ Carry out the specified installation work in consideration

of strong winds, typhoons, or earthquakes.
Improper installation work may result in accidents due
to fall of equipment.

Make certain that all electrical work is carried out by
qualified personnel according to the local laws and
regulations and this installation manual, using a
separate circuit.
Insufficient capacity of the power supply circuit or
improper electrical construction may lead to electric
shocks or fire.

Make sure that all wiring is secure, using the specified
wires and ensuring that external forces do not act on
the terminal connections or wires.
Incomplete connection or fixing may cause a fire.

When wiring between the indoor and outdoor units,
and wiring the power supply, form the wires so that the
frontside panel can be securely fastened.
If the frontside panel is not in place, overheat of the
terminals, electric shocks or a fire may be caused.

If refrigerant gas leaks during installation work,
ventilate the area immediately.
To xic gas may be produced if refrigerant gas comes
into contact with fire.

After completing the installation work, check to make
sure that there is no leakage of refrigerant gas.
To xic gas may be produced if refrigerant gas leaks
into the room and comes into contact with a source of
fire, such as a fan heater, stove or cooker.

Before touching electric terminal parts, turn off power
switch.

. Do not install the machine by

R(Y)P71~125L7V1+W1
Split System air conditioners
4PW14486-1B

Installation manual

1

CAUTION

Ground the air conditioner.
Grounding resistance should be according to national
regulations
Do not connect the earth wire to gas or
water pipes, lightning conductor or
telephone earth wire.
Incomplete grounding may cause electric
shocks.

Gas pipe.
Ignition or explosion may occur if the gas leaks.

Water pipe.
Hard vinyl tubes are not effective grounds.

Lightning conductor or telephone ground wire.
Electric potential may rise abnormally if struck by a

lightning bolt.

Be sure to install an earth leakage breaker.
Failure to install an earth leakage breaker may cause
electric shocks.

Install drain piping according to this installation
manual to ensure good drainage, and insulate the
pipe to prevent condensation.
Improper drain piping may cause water leakage, and
make the furnitures get wet.

Install the indoor and outdoor units, power wire and
connecting wire at least 1 meter away from televisions
or radios to prevent image interference or noise.
(Depending on the radio waves, a distance of 1 meter
may not be sufficient to eliminate the noise.)

Do not install the air conditioner in places such as the
following:

■

Where there is mist of mineral oil, oil spray or
vapor for example a kitchen.

Plastic parts may deteriorate, and cause them to
fall out or water to leak.

■

Where corrosive gas, such as sulfurous acid gas,
is produced.

Corrosion of copper pipes or soldered parts may
cause the refrigerant to leak.

■

Where there is machinery which emits
electromagnetic waves.

Electromagnetic waves may disturb the control
system, and cause malfunction of the equipment.

■

Where flammable gases may leak, where carbon
fiber or ignitable dust is suspended in the air or
where volatile flammables, such as thinner or
gasoline, are handled.

Such gases may cause a fire.

■

Where the air contains high levels of salt such as
that near the ocean.

■

Where voltage fluctuates a lot, such as that in
factories.

■

In vehicles or vessels.

■

Where acidic or alkaline vapoure is present.

■

■

■

■

■

■

■

1

■

■

■

■

■

■

■

■

B

EFORE

INSTALLATION

■

■

Precautions for R-407C

The refrigerant requires strict cautions for keeping the system
clean, dry and tight.

- Clean and dry
Foreign materials (including mineral oils or moisture) should be
prevented from getting mixed into the system.

- Tight
Read "Precautions on refrigerant piping" on page 5 carefully and
follow these procedures correctly.

Since R-407C is a mixed refrigerant, the required additional
refrigerant must be charged in its liquid state. (If the refrigerant is
in state of gas, its composition changes and the system will not
work properly).

The connected indoor units must be indoor units designed
exclusively for R-407C.

Installation

For installation of the indoor unit(s), refer to the indoor unit
installation manual.

Illustrations show class 125 outdoor unit type. Other types also
follow this installation manual.

This outdoor unit requires the pipe branching kit (optional) when
used as the outdoor unit for the simultaneous operation system.
Refer to catalogues for details.

Never operate the unit without the thermistor (R3T), burning of
the compressor may result.

Be sure to confirm the model name and the serial no. of the
outer (front) plates when attaching/detaching the plates to avoid
mistakes.

When closing the service panels, take care that the tightening
torque does not exceed 4.1 Nm.

Handling

As shown in the figure, bring the unit slowly by grabbing the left and
right grips.

Place your hands on the corner instead of holding the suction inlet in
the side of the casing, otherwise the casing could be deformed.

Ta ke care not to let hands or objects come in contact with
rear fins.

S

ELECTING

Select an installation site where the following conditions are
satisfied and that meets with your customer's approval.

- Places which are well-ventilated.

- Places where the unit does not bother next-door neighbours.

- Safe places which can withstand the unit's weight and

- Places where there is no possibility of flammable gas or

- Places where servicing space can be well ensured.

- Places where the indoor and outdoor units' piping and wiring

- Places where water leaking from the unit cannot cause

- Places where the rain can be avoided as much as possible.

INSTALLATION

vibration and where the unit can be installed level.

product leak.

lengths come within the allowable ranges.

damage to the location (e.g. in case of a blocked drain pipe).

SITE

Installation manual

2

R(Y)P71~125L7V1+W1

Split System air conditioners

4PW14486-1B