Daikin BRC7E530W8, BRC7E531W8 Operation Manual
OPERATION MANUAL
Wireless remote controller kit
BRC7E530W8
BRC7E531W8
4
6
5
7
1
TEMP
TIME
MHL
C
RESERVE
ON/OFF
UP
DOWN
FAN
CANCEL
TIMER
MODE
SWING
TEST
2
ON OFF
CODE
UNIT NO.
ON/OFF
FAN
8
10
11
9
13
hr.
12
hr.
15
14
16
TEST
17
1
3
MHL
C
DOWN
UP
6
hr.
4
hr.
2
5
7
TEST
1
3
2
20
21
22
23
19
18
24
25
3 4
5
6
2
1
5 6 7
4
7
1
CODE
UNIT NO.
2
3
BRC7E530W8
BRC7E531W8
Wireless remote controller kit
Operation manual
CONTENTS
Page
Safety considerations .....................................................1
Names and functions of the operating section ...............2
Handling for wireless remote controller ..........................3
Precautions in handling remote controller .................... 3
Installation site.............................................................. 3
Placing the remote controller in the remote
controller holder............................................................ 3
How to put the batteries ............................................... 3
When to change batteries ............................................ 3
In case of a centralized control system ........................ 3
Operation range..............................................................4
Operation procedure.......................................................4
Cooling, Heating, Automatic, Fan and
Program dry operation.................................................. 4
Adjustment ................................................................... 5
Program timer operation............................................... 6
How to set master remote controller
(only for VRV system)................................................... 6
How to designate the master remote controller............ 7
Emergency operation ................................................... 7
Precautions for group control system or two remote
control system .............................................................. 7
Not malfunction of the air conditioner.............................7
How to diagnose trouble spots .......................................8
Emergency stop ........................................................... 8
In case besides emergency stop.................................. 8
Thank you for purchasing this Daikin remote controller.
Carefully read this operation manual before using
the air conditioner. It will tell you how to use the
unit properly and help you if any trouble occurs.
After reading the manual, file it away for future
reference.
S
AFETY CONSIDERATIONS
Read the following cautions carefully and use your
equipment properly.
There are three kinds of safety cautions and tips listed
here as follows:
WARNING
Improper handling can lead to such serious
consequences as death or severe injury.
CAUTION
Improper handling can lead to injury or damage.
It could also have serious consequences under
certain conditions.
NOTE
These instructions will ensure proper use of the
equipment.
Be sure to follow these important safety cautions.
Keep these warning sheets handy so that you can refer
to them if needed.
Also, if this equipment is transferred to a new user, make
sure to hand over this user’s manual to the new user.
WARNING
■
Do not expose yourself directly to the cool
air currents too long, nor allow the air in the
room to become too cold.
Doing so may make you feel sick or damage
your health.
■
If you detect any abnormality (such as the
smell of fire), turn off the power and contact
your dealer for instructions.
If you keep using the air conditioner under
these conditions, it will eventually break
down, and could cause electric shocks or
catch fire.
■
Ask your dealer to install your equipment.
Improper installation could cause water
leakage, electric shocks or fire.
■
Ask your dealer to perform servicing or
repairs whenever necessary.
Improper servicing or repairs could cause
water leakage, electric shocks or fire.
■
Do not stick your fingers or any other objects
into the air inlet, air outlet or air direction
vanes during operation.
The high-speed fan is dangerous and could
cause injury.
■
Ask your dealer to remove and reinstall your
equipment whenever necessary.
Improper installation could cause water
leakage, electric shocks or fire.
CAUTION
■
Do not use the air conditioner for purposes
other than air conditioning.
Do not use the air conditioner for special
purposes such as preserving or protecting
food, animals, plants, precision machinery
or works of art, since the quality of such
items could be adversely affected.
■
When using the air conditioner with other
heating equipment, ventilate the room from
time to time.
Inadequate ventilation could cause an
oxygen shortage.
■
Do not expose your pets or plants to the air
current.
They may be adversely affected.
■
Do not operate the air conditioner with a wet
hand.
Otherwise, you could receive an electric
shock.
■
Do not place any burning appliance in the air
current from the air conditioner, since such
appliance may suffer incomplete combustion.
■
Never place nor use any inflammable sprays
near the air conditioner, since such sprays
could cause a fire.
BRC7E530+531W8
Wireless remote controller kit
4PW23711-1
Operation manual
1
AMES AND FUNCTIONS OF THE OPERATING
N
SECTION
See figure 1
font cover opened)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
, (figure 1B shows the remote controller with
DISPLAY “ ” (SIGNAL TRANSMISSION)
This lights up when a signal is being transmitted.
DISPLAY “ ” “ ” “ ” “ ” “ ” (OPERATION
MODE)
This display shows the current OPERATION MODE.
For cooling only type, “ ” (Auto) and “ ”
(Heating) are not installed.
DISPLAY “ ” (SET TEMPERATURE)
This display shows the set temperature.
DISPLAY “ ” (PROGRAMMED
TIME)
This display shows PROGRAMMED TIME of the
system start or stop.
DISPLAY “ ” (AIR FLOW FLAP)
Refer to "AIR FLOW DIRECTION ADJUST" on
page 5.
DISPLAY “ ” “ ” (FAN SPEED)
The display shows the set fan speed.
DISPLAY “ ” (INSPECTION/ TEST OPERATION)
When the INSPECTION/TEST OPERATION
BUTTON is pressed, the display shows the system
mode is in.
ON/OFF BUTTON
Press the button and the system will start. Press the
button again and the system will stop.
FAN SPEED CONTROL BUTTON
Press this button to select the fan speed, HIGH or
LOW, of your choice.
TEMPERATURE SETTING BUTTON
Use this button for SETTING TEMPERATURE
(Operates with the front cover of the remote controller
closed.)
PROGRAMMING TIMER BUTTON
Use this button for programming “START and/or
STOP” time. (Operates with the front cover of the
remote controller opened.)
TIMER MODE START/STOP BUTTON
Refer to "TIMER MODE START/STOP" on page 6.
TIMER RESERVE/CANCEL BUTTON
Refer to "PROGRAMMING TIME" on page 6.
AIR FLOW DIRECTION ADJUST BUTTON
Refer to "AIR FLOW DIRECTION ADJUST" on
page 5.
OPERATION MODE SELECTOR BUTTON
Press this button to select OPERATION MODE.
16
FILTER SIGN RESET BUTTON
Refer to the section of MAINTENANCE in the
operation manual attached to the indoor unit.
17
INSPECTION/TEST OPERATION BUTTON
This button is used only by qualified service persons
for maintenance purposes.
See figure 3
18
19
20
21
22
23
See figure 4
24
25
NOTE
, (receiver on decoration panel)
EMERGENCY OPERATION SWITCH
This switch is readily used if the remote controller
does not work.
RECEIVER
This receives the signals from the remote controller.
OPERATING INDICATOR LAMP (Red)
This lamp stays lit while the air conditioner runs. It
flashes when the unit is in trouble.
TIMER INDICATOR LAMP (Green)
This lamp stays lit while the timer is set.
AIR FILTER CLEANING TIME INDICATOR LAMP
(Red)
Lights up when it is time to clean the air filter.
DEFROST LAMP (Orange)
Lights up when the defrosting operation has started.
(For cooling only type this lamp does not turn on.)
, (cool/heat changeover remote controller)
FAN/AIR CONDITIONING SELECTOR SWITCH
Set the switch to “ ” (FAN) for FAN and “ ”
(A/C) for HEAT or COOL.
COOL/HEAT CHANGEOVER SWITCH
Set the switch to “ ” (COOL) for COOL and “ ”
(HEAT) for HEAT
■
For the sake of explanation, all
indications are shown on the display in
figure 1 contrary to actual running
situations.
■
If the air filter cleaning time indicator
lamp lights up, clean the air filter as
explained in the operation manual
provided with the indoor unit.
After cleaning and reinstalling the air
filter, press the filter sign reset button
on the remote controller. The air filter
cleaning time indicator lamp on the
receiver will go out.
■
The defrost lamp will flash when the
power is turned on. This is not a
malfunction.
Operation manual
2
4PW23711-1
BRC7E530+531W8
Wireless remote controller kit
Loading...