W O R T H
k n o w i n g
Please keep the video machine's guarantee card and receipt safe for warranty purposes.
Precautions
Read carefully through this manual to familiarize yourself with this high-quality video recorder.
Make sure the rating of your household electricity supply matches that shown on the back of the video recorder.
Refer to this chapter and the "Initial installation" chapter to help you install and adjust your video recorder.
Do not ...
... expose the video recorder to high levels of humidity and heat, to avoid the risk of fire and electric shock.
... open the video recorder. Have a qualified technician carry out repairs.
... connect the video recorder to the power supply if you have just moved it from a cold to warm environment. This can result in condensation inside the recorder and cause serious damage to the machine and cassettes. Wait around two hours to allow it to reach room temperature.
Make sure ...
... the recorder is placed on a steady, flat surface.
... the recorder should be placed at least 10cm apart from the other home appliances or the obstacles to get sufficient ventillation.
... you clean the recorder only with a soft, lint-free cloth; do not use aggressive or alcohol-based cleaning agents.
... you disconnect the power supply if the recorder appears to be working incorrectly, is making an unusual sound, has a strange smell, has smoke emitting from it or liquids have got inside it. Have a qualified technician check the recorder.
... you disconnect the power supply and aerial if you will not be using the recorder for a long period or during a thunderstorm.
This apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on this apparatus.
For your own safety!
There are no components in this video recorder you can service or repair yourself.
Do not open the case of the video recorder. Only allow qualified personnel to repair or service your set.
This video recorder is designed for continuous operation. Switching it off does not disconnect it from the mains (stand-by). To disconnect it from the mains, you have to unplug it.
Recording any copyright protected material may infringe a copyright.
Before doing anything with the machine, please read the chapter "Initial installation".
W O R T H
k n o w i n g
Contents
Controls
The remote control unit
The machine, On screen display
Initial installation
Connecting up the video recorder,
Setting up the video recorder
OSD (On Screen Display) ON & OFF
Playing cassettes
Playing back
Still, Variable picture search, Variable
Accessing new recordings (index scan),
Recording cassettes
Simple recording
One touch recording (OTR)
More functions
Normal timer recording
Timer Review – changing and erasing,
Clock/Counter display, Remaining time
Accessing counter zero position,
Menu languages, Child lock, Cassettes,
Tuning in new stations
Tuning
Station names
Sorting programme locations, Clearing
Connections and copying
To the TV via antenna cable (if you are
Copying, Assembling
Appendix
Brief instruction for experienced users
Before you ask a specialist
Index, Technical data
On the following pages, the pictures show the buttons you press on the remote control to perform the function, and what you should see in the On Screen Display or machine display (if present).
1
C O N T
R O L S
max. 7 m.
30° 30°
The buttons to use are marked on the following pages.
2
The remote control is the principle means of control, but the main playback and record functions are also available on the front of the machine.
Press any button to turn on the power.
The remote control unit
power on/off
this button is not available for this set
number buttons to select programmes (stations) or to type in numbers
this button is not available for this set
a button for selecting input sources for recording: TV stations – input sockets
You can select the external line by using “00”, “AV”, or “PR+/-“ button. (refer to page 20)
clock/counter on-screen display
CM skip button to cue the tape for 30 seconds
pause (record), still (playback)
playback start
playback stop
rewinding/fast forwarding a cassette from stop, or picture search backwards/forwards from playback mode
the record or OTR button
(One Touch Recording means: each time you press the button recording is extended by 30 minutes)
to eject the cassette
a button that doubles the maximum recording time for very long recordings
the variable slow motion button
the menu controls, programme (station) selection (PR +/–)
to search the beginnings of records (index)
this button is not available for this set
this button is not available for this set
Press any button to turn on the power.
The machine
C O N T R O L S
STANDBY/ON
playback stop and ejecting the cassette
front input sockets for connecting a camcorder
programme (station) selection
recording or OTR
(One Touch Recording means: each time you press the button recording is extended by 30 minutes)
rewinding / fast forwarding a cassette from Stop, or picture search backwards / forwards from playback mode.
playback start
On screen display
MAIN MENU
TIMER PROGRAM
PR PRESET
VCR SETUP
TAPE CONTROL
PR+/-:SELECT
OK:CONFIRM MENU:END
The video’s menu system gives you easy-to-understand access to the less used functions such as tuning to stations, clock setting and more.
“Tape Control” Menu appears only when a tape is in the VCR.
|
VCR |
|
CLOCK |
|
LANGUAGE |
* |
RF OUTPUT |
16:9 SET |
|
OSD |
|
example |
PR+/-:SELECT |
OK:CONFIRM |
2x
The menus which button the next step
* Though the ”16:9 Set” is displayed on the screen,
I |
n |
i |
t |
i |
a |
l |
I N S TA L L AT I O N
The buttons to use are marked on the following pages.
Place your video
horizontally on a flat, steady base so that air can circulate around it for ventilation.
away from humidity and heat, magnetic fields, such as those from loudspeakers etc., and with no heavy objects placed on top.
Connecting up the video recorder
Switch off all components when connecting or disconnecting cables.
AC 230 V,
50 Hz
Unplug the aerial cable from your TV and plug it into the "ANT. IN" socket of the video.
Plug the short coaxial cable provided into the "ANT.OUT" socket of the video and the aerial socket of the TV.
Plug a RCA cable into the "RCA” socket of the video and the AV socket on the TV if available.
This connection will provide best picture and sound quality. Ask your dealer for an appropriate cable if you do not have one.
Without a RCA cable, you need to follow the steps described under "If you are not using a RCA cable" (right page and page 19).
Make sure the rating of the household mains supply matches the rating shown on the back of the video.
Now plug in the mains lead. The display of the video should now light.
Fitting the remote control's batteries
+ |
– |
|
Fit the batteries as |
|
– |
|
1.5 V (AAA) |
|
shown by the |
|
pictures in the bay. |
|
|
|
Protect your environment by returning used batteries to your dealer. Since batteries contain toxic substances they require special disposal methods.
Make sure the batteries are always of the same type and age, and remove them
from the remote control if you are not using it for a long period.
4
Switch the TV on.
You can also start "Auto Search" in the menu "PR Preset" "Auto Search".
To tune in new stations (manual tuning) and to enter station names see page 16-18.
Setting up the video recorder
LANGUAGE SET
ENGLISH
POLISH
CZECH
HUNGARIAN
PYCCKNZ
DEUTSCH
SLOVAK
PR+/-:SELECT
OK:CONFIRM MENU:END
AUTO SEARCH!
OK:CONFIRM MENU:END
AUTO SEARCH
PR03
V-L - - - - - - - - - - - - - -
76%
MENU:END
AUTO SEARCH
...
PLEASE WAIT...
I n i t i a l
INSTALLATION
I |
n |
i |
t |
i |
a |
l |
I N S TA L L AT I O N
Setting up the video recorder (continued)
ONE OR MORE STATIONS ARE CLOSE TO THE VIDEO PICTURE. PLEASE SELECT ANOTHER.
CURRENT |
PR 52 |
RECOMMENDED PR 54
0-9:SELECT (21-69) OK:CONFIRM MENU:END
IMPORTANT!
PLEASE CHANGE THE TV PR TO 54.
CLOCK SET
TIME - - : - -
DATE - - / - - /- - - -
0-9:SETUP (HOUR)
/
:CORRECT MENU:END
MANUAL SET
PR01 P-01 |
PR08 P-08 |
PR02 P-02 |
PR09 P-09 |
PR03 P-03 |
PR10 P-10 |
PR04 P-04 |
PR11 P-11 |
PR05 P-05 |
PR12 ---- |
PR06 P-06 |
PR13 ---- |
PR07 P-07 |
PR14 ---- |
PR+/-:SELECT |
|
OK:CONFIRM |
MENU:END |
If other stations are positioned on near the current RF OUTPUT PR, the guide message appears automatically.
The VCR recommends the optimal RF OUTPUT PR number automatically.
Press the OK button to confirm the recommended PR.
Then type in the current time and date.
Should you wish the stations to have the same numbers as those used on the TV, follow the instructions in "Sorting programme locations" on page 20.
Else ...
exit the basic installation function and enjoy your video recorder.
If you don´t see this picture, because you don´t use a RCA cable, search this picture now (CH 52) with the station tuning functions of your TV set (see its user manual).
In case of interference problems on CH 52, type in an other transmission channel between 21 and 69 using the number buttons.
6
I n i t i a l
INSTALLATION
OSD (On Screen Display) ON & OFF
This OSD (On Screen Display) indicates the television screen. The factory default is ON for this information shown during normal picture, follow
MAIN MENU
TIMER PROGRAM
PR PRESET
VCR SETUP
TAPE CONTROL
PR+/-:SELECT
OK:CONFIRM MENU:END
VCR SETUP CLOCK SET LANGUAGE SET RF OUTPUT SET
* 16:9 SET OSD ON/OFF
PR+/-:SELECT
OK:CONFIRM MENU:END
OSD ON/OFF
ON
OFF
PR+/-:SELECT
OK:CONFIRM MENU:END
Select “OSD ON/OFF”.
If you want OSD OFF mode, select it and press OK button to confirm.
Then OSD characters are not displayed in the normal picture.
|
|
* Though the ”16:9 Set” is displayed on the screen, this function is not available for this set. |
7 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|