Daewoo SF-7300 Instruction Manual

Contents Important Safeguards

Product information

1

Product Information

Important Safeguards .....................................................1

Advantages of This Product Are .... ............................ 4

Read Carefully before Using .........................................5

Identification of Controls ............................................... 6

Remote Control .............................................................. 10

Installation

Setting up your player................................................... 11

Connecting your player through extra equipment

(satellite system) ............................................................ 12

Connecting your player to the Hi-Fi system .............13

How to connect your player to another player,

How to connect your player to a camcorder ............ 14

Connecting Dolby Digital Amp with Digital Audio

Out Jack ........................................................................... 15

2nd Scart Socket ............................................................. 16

Basic Operation

Initial Installation ........................................................... 17

Setting time and date / Auto clock ............................ 18

OSD ON & OFF / Output Select ................................ 19

DVD Playback ................................................................ 20

VCR Playback ................................................................ 21

Recording ........................................................................ 22

VCR Operation

Tuning in New Stations ................................................ 24

Timer Recording ............................................................ 26

More Functions ..............................................................29

Connections and Copying ........................................... 33

DVD Operation

Playing a desired scene ................................................ 35

Confirming the current PLAYING TIME.................. 40

Selecting an AUDIO language, SUBTITLE language

and 3D AUDIO ...............................................................42

Selecting ZOOM and Multi Angle.............................. 44

About MP3 , JPG and DivX® discs............................ 46

Displaying menus in a disc........................................... 51

Set-up

Language Setup .............................................................. 52

Video Setup ......................................................................54

Audio Setup..................................................................... 55

Others Setup ...................................................................56

The others

About DVD...................................................................... 58

Basic information about VCR and Videotape.......... 61

Before doubting about troubles (VCR)....................... 62

Before doubting about troubles (DVD) ..................... 64

Specifications .................................................................. 65

CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER (OR BACK). NO
USER-SERVICEABLE PARTS INSIDE. REFER
SERVICING TO QUALIFIED SERVICE PERSONNEL.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

The lightning flash with arrowhead symbol,
within an equilateral triangle, is intended to
alert the user to the presence of uninsulated
“dangerous voltage” within the product’s
enclosure that may be of sufficient magnitude
to constitute a risk of electric shock.

The exclamation point within an equilateral
triangle is intended to alert the user to the
presence of important operating and servicing
instructions in the literature accompanying the
appliance.

WARNING : TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS

APPLIANCE TO RAIN OR MOISTURE.

CAUTION : TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT,

FULLY INSERT.

IMPORTANT FOR LASER PRODUCTS

• LASER :

This Digital Video Disc Player employs a Laser System. To ensure proper use of this product
please read this instruction manual carefully and retain for future reference. Should the unit
require maintenance, contact an authorized service location - see service procedure.
Use of control adjustments or the performance of procedures other than those specified
may result in hazardous radiation exposure.
To prevent direct exposure to the laser beam, do not try to open the enclosure. Visible laser
radiation when open and interlocks defeated.
DO NOT STARE INTO THE BEAM.

• DANGER :

Visible laser radiation when open and interlock failed or
defeated. Avoid direct exposure to beam.

• CAUTION : Do not open the top cover. There are no user
serviceable parts inside the Unit; leave all servicing to
qualified service personnel.

CLASS 1 LASER PRODUCT
LUOKAN 1 LASERLAITE
KLASS 1 LASERAPPARAT

CAUTION: Any changes or modification in construction of this device which are not expressly approved by

the party responsible for compliance could void the user’s authority to operate the equipment.

• Make sure the unit should be placed at least 8cm apart from the other home appliances or the
obstacles to get sufficient ventilation.

• This unit shall not be exposed to dripping or splashing and no objects filled with liquids, such
as vases, shall be placed on this unit.

• Switching it off does not disconnect it from the mains (stand-by). To disconnect it from the
mains, you have to unplug it.

• The system is not completely disconnected from the mains when the / I button is set to
the position.

Important Safeguards

3

2

Important Safeguards

Product informationProduct information

This set has been designed and manufactured to assure
personal safety. Improper use can result in electric
shock or fire hazard. The safeguards incorporated in
this unit will protect you if you observe the following
procedures for installation, use and servicing. This unit
is fully transistorized and does not contain any parts
that can be repaired by the user.

1 READ INSTRUCTIONS

All the safety and operating instructions should be
read before the unit is operated.

2 RETAIN INSTRUCTIONS

The safety and operating instructions should be
retained for future reference.

3 HEED WARNINGS

All warnings on the unit and in the operating
instructions should be adhered to.

4 FOLLOW INSTRUCTIONS

All operating and use instructions should be
followed.

5 CLEANING

Unplug this unit from the wall outlet before
cleaning. Do not use liquid cleaners or aerosol
cleaners. Use a damp cloth for cleaning.

6 ATTACHMENTS

Do not use attachments unless recommended by
the unit’s manufacturer as they may cause
hazards.

7 WATER AND MOISTURE

Do not use this unit near water- for example, near
a bath tub, wash bowl, kitchen sink or laundry tub,
in a wet basement, or near a swimming pool.

8 ACCESSORIES

Do not place this unit on an
unstable cart, stand, tripod,
bracket, or table. The unit may
fall, causing serious injury to
a child or adult as well as serious damage to the
unit. Use this unit only with a cart, stand , tripod,
bracket, or table recommended by the
manufacturer.

8A

A unit and cart combination should be moved

with care. Quick stops, excessive force, and uneven
surfaces may cause the product and cart
combination to overturn.

9 VENTILATION

Slots and openings in the case are provided for
ventilation to ensure reliable operation of the unit
and to protect it from overheating. These openings
must not be blocked or covered. These openings
must not be blocked by placing the unit on a bed,
sofa, rug, or other similar surface. This unit should
never be placed near or over a radiator or heat
radiator. This unit should not be placed in a built­in installation such as a bookcase or rack unless
proper ventilation is provided or the
manufacturer’s instructions have been adhered to.

10 POWER SOURCES

This unit should be operated only from the type of
power source indicated on the marking label. If
you are not sure of the type of power supply to
your home, consult your dealer or local power
company. For units intended to operate from
battery power, or other sources, refer to the
operating instructions.

11 GROUNDING OR POLARIZATION

This unit is equipped with a polarized alternating ­current line plug (a plug having one blade wider
than the other). This plug will fit into the power
outlet only one way.
This is a safety feature. If you are unable to insert
the plug fully into the outlet, try reversing the
plug. If the plug still fails to fit, contact your
electrician to replace your obsolete outlet.To
prevent electric shock, do not use this polarized
plug with an extension cord, receptacle, or other
outlet unless the blades can be fully inserted
without blade exposure. If you need an extension
cord, use a polarized cord.

12 POWER-CORD PROTECTION

Power-supply cords should be routed so that they
are not likely to be walked on or pinched by items
placed upon or against them, paying particular
attention to cords at plugs, convenience
receptacles, and the point where they exit from the
unit.

PORTABLE CART WARNING

(symbol provided by RETAC)

13 LIGHTNING

For added protection for this unit during a
lightning storm, or when it is left unattended and
unused for long periods of time, unplug it from the
wall outlet and disconnect the antenna or cable
system. This will prevent damage to the unit due
to lightning and power line surges.

14 DISC TRAY

Keep your fingers well clear of the disc as it is
closing. It may cause serious personal injury.

15 OVERLOADING

Do not overload wall outlets of extension cords as
this can result in a risk of fire or electric shock.

16 OBJECT AND LIQUID ENTRY

Never push objects of any kind into this unit
through openings as they may touch dangerous
voltage points or “short-out” parts that could
result in a fire or electric shock. Never spill liquid
of any kind on the unit.

17 BURDEN

Do not place a heavy object on or step on the
product. The object may fall, causing serious
personal injury and serious damage to the product.

18 DISC

Do not use a cracked, deformed or repaired disc.
These discs are easily broken and may cause
serious personal injury and product malfunction.

19 SERVICING

Do not attempt to service this unit yourself as
opening or removing covers may expose you to
dangerous voltage or other hazards. Refer all
servicing to qualified service personnel.

20 DAMAGE REQUIRING SERVICE

Unplug this unit from the wall outlet and refer
servicing to qualified service personnel under the
following conditions.
A. When the power-supply cord or plug is

damaged.

B. If liquid has been spilled, or objects have fallen

into the unit.
C. If the unit has been exposed to rain or water.
D. If the unit does not operate normally by

following the operating instructions. Adjust

only those controls that are covered by the
operating instructions. Improper adjustment of
other controls may result in damage and will
often require extensive work by a qualified
technician to restore the unit to its normal
operation.

E. If the unit has been dropped or the cabinet has

been damaged.

F. When the unit exhibits a distinct change in

performance-this indicates a need for service.

21 REPLACEMENT PARTS

When replacement parts are required, have the
service technician verify that the replacements he
uses have the same safety characteristics as the
original parts. Use of replacements specified by the
unit manufacturer can prevent fire, electric shock,
or other hazards.

22 SAFETY CHECK

Upon completion of any service or repairs to this
unit, ask the service technician to perform safety
checks recommended by the manufacturer to
determine that the unit is in safe operating
condition.

23 WALL OR CEILING MOUNTING

The product should be mounted to a wall or
ceiling only as recommended by the manufacturer.

24 HEAT

The product should be situated away from heat
sources such as radiators, heat registers, stoves, or
other products (including amplifiers) that produce
heat.

25 To prevent battery electrolyte leakage, which may

result in injury and damage to the unit or other
objects, observe the following precautions:
A. All batteries must be installed with the

proper polarity.
B. Do not mix new with old or used batteries.
C.

Only use batteries of the same type and brand.
D. Remove the batteries when they are not to be

used for a long period time.
E. When the batteries have become discharged,

they must be disposed of in a safe manner

which complies with all applicable laws.

Read Carefully before Using

54

Advantages of This Product Are .....

Product information

• DVD, VCD, CD, CD-R(MP3), CD-RW, VHS

• Watching DVD for recording broadcast

• Integrated remote control (VCR, DVD)

• VISS function

• Multiplex sound playback/record

• High Sound Quality of 6 head Hi-Fi

• Simple record function

• MP3/JPEG file playback function (CD-R
disc having records of MP3/JPEG files)

• Function to play DivX files (disc recorded
with the .avi,. divx format.)

(Some of the discs may not be played
according to a DivX version. )

• Screensaver function (DVD)

• 3D sound (3D sound effect using 2 speakers)

• High bit/High sampling with 108MHz/12-bit
Video Encoder.

• High bit/High sampling with Built-In Audio
DAC.

• Coaxial digital Audio output (PCM, Dolby
Digital, dts)

You can enjoy high-level digital audio by
connecting with amp embedded with Dolby
Digital / dts decoder.

• Built-in Dolby Digital decoder (DVD)

• Analog audio 2-channels output for
DOWNMIX (x1)

• Composite video output (x1)

• Slow Forward / Reverse playback (DVD)

• Fast Forward / Reverse playback

• Search of title, chapter, and time in DVD
disc, and search of time and track time in
VCD.

• Various TV aspect (DVD)

4:3 for Pan and Scan, 4:3 for Letter Box, and 16:9
for Wide

• Repeat playback (title, chapter, and part for
DVD/ track, disc, and part for VCD/CD)

• Selective Play (DVD/VCD/CD)

You can select and play the desired title / chapter
of DVD and track of Video CD/CD in STOP
mode.

• 8 languages OSD(On Screen Display)
function(DVD).
You can select and display OSD in 8
languages.

• Parental Lock function (DVD)

This function can prevent playback of software
that may be unsuitable for children.

• Multi Audio function (DVD)

The audio soundtrack can be heard in up to 8
languages. In the case of SVCD or VCD, it
depends on the disc. (The number of audio
languages depends on the software.)

• Multi Subtitle function (DVD)

The subtitle can be seem in up to 32 languages.
In the case of SVCD or VCD, it depends on the
disc. (The number of subtitle languages depends
on the software.)

• Multi Angle function (DVD)

This function allows you to choose the viewing
angle of scenes which were shot from a number
of different angles. (The number of angles
depends on the software.)

• Screen zoom function (DVD/VCD)

Cautions in use of DVD-Video player are described
below.

Please read carefully before using a DVD-Video player.

✔ Installation place and handling

• When you place this player near other devices,
they may affect poorly together.

• When you place DVD-Video player and TV in
the upper and lower sides, it may cause
flickering of pictures or failure (tape is not
ejected).

• When you place this player near strong
magnetic materials, it may affect image or voice
poorly or damage recording.

• Do not spill volatile liquids like insect spray
over the player. Do not leave rubber or plastic
products in contact with the player for a long
time. They will cause deterioration or paint
peel-off.

✔ Not in use

• When the unit is not in use, be sure to remove
the disc or tape and turn off the power.

• If you do not use the unit for a long period,
remove batteries in remote control to prevent
leakage.

• In case you don’t use the unit for a long time,
the unit may not function properly in the
future. Turn on and use the player occasionally.

✔ Moving

• Repack the unit as it was originally packed at
the factory. Alternatively, pack this product
with towel not to be damaged.

• Eject any videotape.

✔ Cleaning

• Dust off dirt in cabinet or control panel part
smoothly with a soft cloth.

• For heavy dirt, soak the cloth in a weak
detergent solution, wring it well and wipe. Use
a dry cloth to wipe it out.

• Follow instructions in using chemical cleaners.

• Do not use any type of solvent such as gasoline
or benzene, as they may cause deterioration or
paint peel-off.

✔ Checking

• Video is a high precision device. To obtain a
clear screen, we recommend regular inspection

and maintenance every 1,000 hours of use by
technical engineers.

• For checking, contact your dealer or your
nearest service center.

✔ Checking and Replacement of Antenna

• Antenna is subject to change in its direction or
damage by wind and rain. For clean screen,
contact and consult your nearest service center
about checking and replacement.

✔ In recording important screen

• Be sure to record the screen and check whether
recording is performed properly. We beg you
to understand compensation of recording if
recording is not performed by badness of used
tape or video.

✔ Copyright

• Do not use your recordings without permission
of a copyrighter except personal usage.

✔ Tape and Disc Handling

• Do not use any tape and disc below. Damage
of video head or cut/coiling of tape may cause
failure.

- Tape with mold

- Tape or disc stained with juice or attachments

- Tape having breakage connection

- Disassembled tape

- Disc with severe scratch

• Moisture condensation may occur in tape.

Moisture condensation damages the tape.
Please use the tape after the moisture
condensation is disappeared.

• After use, store tape vertically in a case to

prevent loose.

• Do not store the following places.

- High temperature and humidity

- Subject generation of mold

- Subject to direct sunlight

- Much dirt or dust

- Near strong magnetic materials such as speaker

✔ Video head cleaning

• Video head cleaning is needed when the
playback picture becomes unclear. Use an
equivalent high quality chemical non-abreasive
head cleaning tape or have them cleaned
professionally.

Identification of Controls

76

Identification of Controls

Product information

!

POWER (STANDBY/ON) button

Use to power the device on/off if AC power
supply is connected.

@

Place to insert videotape

#

Disc tray

$

VIDEO INPUT jack

%

AUDIO INPUT jack

^

EJECT button

&

RECORD button

*

PR Down/Up button

(

Operation Display Window

Display operation of device. For more information,
see “Operation Display Window” in 7P.

)

SELECT button

Use to change DVD mode to VCR mode, and vice
versa.

1

STOP button

Use to stop playing.

2

REWIND button

Use to rewind currently being played videotape or
disc; or to playback back rapidly.

3

Playback/PAUSE button

Playback videotape or disc.
Press this button to pause a screen.

4

FAST FORWARD button

Use to wind currently being played videotape or
disc; or to playback rapidly.

5

OPEN/CLOSE Tray button

Main body (front panel)

Timer Recording Standby

Timer Recording Error

Recording in Progress

Timer Recording in
Progress

Recording Pause

- RECORDING MODE -

DVD playback

Fast playback

Fast reverse playback

Slow playback

Pause picture

- DVD OPERATION -

VCR playback

Fast forward

Rewinding

Fast playback (CUE)

Fast reverse playback
(REVIEW)

Slow playback

Still picture

Stop

Child Lock

- VCR OPERATION -

Operation Display Window

Identification of Controls

Product information

9

Remote control 2 Batteries RF cable

Instruction

Manual

• To purchase accessories or not supplied parts additionally, contact your nearest dealer or service center. But,
instruction manual is not sold additionally.

• Operate remote control within 7m from the unit.

• Do not press 2(two) buttons at the same time.

• Do not light up sending and receiving part of remote control.

• Do not keep in the place with much dust and humidity.

Instructions in using REMOTE

Accessories

AAA

AAA

✔

Remote control battery installation

Detach the battery cover on the rear of the
remote control, and insert two AAA
batteries with the + and - ends aligned
correctly.

Two “AAA ” batteries
(optional).

8

Identification of Controls

!

#

*

&

^

@

$

%

!

POWER CORD
It is a jack for supplying power to the unit.
Connect to outlet in a wall.

@

EURO AV2/DECODER Jack

#

VIDEO OUTPUT Jack

$

AUDIO OUTPUT Jack

%

DIGITAL OUTPUT (COAXIAL) Jack
To enjoy sound quality of theatre level in home,
connect this jack with amp or unit embedded
with digital audio decoder.

^

Connection to ANTENNA Cable

&

Connection to TV

*

EURO AV1 Jack

Main body (Rear Panel)

✔

Disposal of Used Electrical &Electronic Equipment

The meaning of the symbol on the product, its accessory or packaging indicates that
thisproduct shall not be treated as household waste. Please, dispose of this equipment at your
applicable collection point for the recycling of electrical & electronic equipments waste. In the
European Union and Other European countries which there are separate collection systems
for used electrical and electronic product. By ensuring the correct disposal of this product,
you will help prevent potentially hazardous to the environment and to human health, which
could otherwise be caused by unsuitable waste handling of this product. The recycling of
materials will help conserve natural resources. Please do not therefore dispose of your old
electrical and electronic equipment with your household waste. For more detailed
information about recycling of this product, please contact your local city office, your
household waste disposal service or the shop where you purchased the product.

Setting up your player

Installation

1110

Remote Control

With this connection, if your player is receiving CH ARD and your TV is displaying CH3, when you press the
[TV/VCR] button on the remote control, your TV will automatically display the CH ARD. “VCR” will be
displayed.
In this mode, to change the viewing channels the [PR-] and [PR+] buttons on the player remote need to be used.
To switch off this mode press [TV/VCR] on the remote control, TV remote can now be used as normal. You will
get better pictures and sound quality if you connect your player with a scart lead.

■ Before you start, unplug all the equipment from the mains supply.

Television

Aerial

The type of aerial you
should use, depends on
local interference and how
far you are from the
transmitter. You should
contact a local retailer if you
have any questions about
your aerial.

Back view of your player

200-240V~,
50/60 Hz

Television

Aerial

Back view of your player

200-240V~,
50/60 Hz

Scart lead (not supplied)

(Option 1) - Connecting your player through RF lead

(Option 2) - Connecting your player through a scart lead

!

#

@

$
%

^

&

(

)

2

4
5

7

9

“

#

‘

=

q

w

e

R

r

T

Y

0

+

E

t

y

W

Q

*

3

1

6
8

!

[DVD]

OPEN/CLOSE button,

[VCR]

EJECT button

@

VCR SELECT button

#

[DVD, VCR]

NUMBER button,

[VCR]

TRACKING -/+

button

$

SYSTEM button (This button is not available for this set)

%

SETUP button

^

[DVD, VCR]

MOVE/SELECT in OSD,

[VCR]

Channel

Up/Down button

&

[DVD]

TITLE /PBC button

*

[DVD]

AUDIO LANGUAGE Select,

[VCR]

AUDIO Select

button

(

[DVD]

SUBTITLE Select button

)

REVERSE SEARCH button

1

PLAY/PAUSE button

2

[DVD]

PREVIOUS button (move into a previous chapter

or track)

3

[VCR]

Record SPEED button

4

[VCR]

Record button

5

[VCR]

TV/VCR button

6

[DVD]

3D button

7

[VCR]

CM SKIP

8

[VCR]

Replay button

9

POWER button

0

DVD SELECT button

“

[VCR]

INPUT Selection button

‘

CLEAR button

+

[DVD, VCR]

OSD DISPLAY button

=

OK/ENTER button

Q

[DVD]

MENU button

q

[DVD]

Chapter/Title/Time SEARCH button

W

[DVD]

ZOOM button

w

FORWARD SEARCH button

E

STOP button

e

[DVD]

NEXT button (Move into a next chapter or track) ,

[VCR]

Frame Advance button in pause mode

R

[DVD]

REPEAT Playback button

r

[DVD]

REPEAT a defined period from A to B button

T

[DVD]

ANGLE button

t

[DVD]

MARK button

Y

[VCR][DVD]

PROGRAM button

y

[VCR]

LAST CHANNEL button (If you move channels
using the [PR+/PR-] button, return to the previous
channel which was being watched. )

Press the power [ ] button of the remote for about
5 seconds. No buttons of front panel can be operated

now and Lock indicator (“ ”) will be
displayed on window display. To release child lock,
press any button of the remote control.

POWER ON

Player will be POWER ON if any button of the
remote control is pressed.

Child Lock !

Connecting your player to the Hi-Fi system

Installation

1312

Connecting your player through
extra equipment (satellite system)

■ Before you start, unplug all the equipment from the mains supply.

Television

Plug a phone cable into the
“Audio L/R” sockets on the
back panel and into the audio
sockets on any audio
amplifier, if needed. If your
player does not have this
connection, see page 15.

Player

200-240V~,
50/60 Hz

You can also use a scart lead to improve picture and sound quality from your player.

Hi-Fi

Aerial

Television

Plug a scart to phone cable into
the “AV1” socket on the back
panel and into the audio socket
on any audio amplifier, if
needed.

Player

200-240V~,
50/60 Hz

Hi-Fi

Aerial

Option 1

Option 2

■ Before you start, unplug all the equipment from the mains supply.

Television

Aerial

Back view of your player

200-240V~,
50/60 Hz

You can use this connection if your player has two scart sockets. This will improve sound and picture quality
when you are recording from satellite.

Satellite

(Option 1) - Connecting your player through RF lead

Connecting Dolby Digital Amp
with Digital Audio Out Jack

Installation

1514

How to connect your player to another player

(L) AUDIO IN (R)

1

1 Select COAXIAL to connect to amp of Dolby Digital.

* If you want to know about “Dolby Digital”, please refer to [About DVD] in 58-60p.

Home Theater Receiver with Dolby Digital decoding capability

REAR PANEL OF DVD-VIDEO

CONNECTING CABLE
(Not supplied)

Manufactured under license from Dolby Laboratories.
"Dolby" and the double-D symbol are registered trademarks of Dolby Laboratories.

How to connect

“DTS” and “DTS Digital Out” are trademarks of Digital Theater Systems, Inc.

■ Before you start, unplug all the equipment from the mains supply.

First player

Second player

200-240V~,
50/60 Hz

1) Insert the tape you wish to record on into the first player and press [INPUT] until “AV1” appears on the front
display.

2) Insert the tape you wish to copy from into the second player. Press the [PLAY] button on the second player.

3) Press the [RECORD] button on the first player.

The player will start recording.

If your player has two scart sockets, you can use the other socket “AV2” to connect other equipment.
To use this function, see page 16.

How to connect your player to a camcorder

■ Before you start, unplug all the equipment from the mains supply.

If you have connected your camcorder in this way, you can also connect a scart lead from “AV2” on the
back panel of the player to the television. To use this function, see page 16.

You can also connect the camcorder by using a phone cable if your player has front input sockets.
Check the front of your player for this connection, see page 16.

Camcorder

Aerial

200-240V~,
50/60 Hz

Television

Player

to

camcorder

Scart Plug
to TV

How to connect

How to connect

Initial Installation

Basic Operation

1716

2nd scart socket

■ Switch the TV on.

■ You can also start "AUTO SET" in the SETUP "PR PRESET"

➝

"AUTO SET".

■ To tune in new stations (manual tuning) and to enter station names see page 24-25.

LANGUAGE SET

ENGLISH
DEUTSCH
ITALIANO
ESPAÑOL
FRANÇAIS
NEDERLANDS

PR+/-:SELECT
OK:CONFIRM SETUP:END

COUNTRY SET
BN
DNL
DK S
ESF
GR CH

ITR

LUX OTHERS

PR+/-:SELECT
OK:CONFIRM SETUP:END

SETUP:END

PLEASE WAIT...

CH 25

RF OUTPUT SET

0-9:SELECT(21-69)
OK:CONFIRM SETUP:END

CURRENT CH 52
RECOMMENDED CH 54

You should see this picture the first time you switch on the TV
and player.

Choose your language.

1

Then choose your country.
For selecting the country, refer to the followings.

2

OK for "AUTO SET!".

"AUTO SET" tunes in all the stations you can receive in your
country.

Clock is automatically set.

3

If other stations are positioned on near the current RF OUTPUT
CH, the guide message appears automatically.

The player recommends the optimal RF OUTPUT CH number
automatically.

4

B: Belgium
D: Germany
DK: Denmark
E: Spain
GR: Greece

I: Italy
LUX: Luxembourg
N: Norway
NL: Netherlands
S: Sweden

SF: Finland
CH: Switzerland
TR: Turkey

Press the [OK] button to confirm the recommended PR.

Should you wish the stations to have the same numbers as those
used on the TV, follow the instructions in "Sorting programme
locations" on page 25.

Else ...
exit the basic installation function and enjoy your player.

5

PLEASE CHANGE THE TV
CH TO 54.

IMPORTANT!

MANUAL SET

PR01 ARD PR08 P-08
PR02 ZDF PR09 P-09
PR03 P-03 PR10 P-10
PR04 P-04 PR11 P-11
PR05 MTV PR12 ---­PR06 P-06 PR13 ---­PR07 P-07 PR14 ----

PR+/-:SELECT
OK:CONFIRM SETUP:END

• If you don´t see this picture, because you don´t use a SCART cable,
search this picture now (CH 52) with the station tuning functions of
your TV set (see its user manual).

• In case of interference problems on CH 52, type in an

other transmission channel between 21 and 69 using
the number buttons.

Setting up the player

If your video has the AV2 output, shown in the diagram below, you can connect other equipment as seen on
pages 12-15.

2nd scart

INPUT ONLY

INPUT+OUTPUT

When connecting other equipment please refer to their manuals for further information. This video manual
recommends the set up as shown on page 12. When connected by this method if the equipment is turned off the
video behaves as normal, but if the equipment is turned on the video will automatically switch over to AV2
mode and displays the channel of the other equipment, channel selection can only be performed by the other
equipment, the video PR+/PR- buttons have no effect.

To return to normal video use the other equipment must be turned off.

Recording from other Equipment.

Simple recording can be performed, ensure the equipment is turned on and is displaying the correct channel.
Timer recording, set the video to perform a timed recording ensuring AV1 is selected as the channel to be
recorded. Some equipment may have a timer which allows it to be powered on to the correct channel, if this
feature is not available the other equipment should be left powered on.

Front AV

If the video has front input sockets, it is possible to connect devices such as a
camcorder to the video. To watch a camcorder tape the video must be in
AVF mode. Recordings of this input are the same as described on page 14.

2nd scart socket

OSD ON & OFF

Basic Operation

1918

Setting time and date

Output Select

Press [DVD] button.

If DVD mode is correctly selected, DVD on the operation display
window is lit. Then, REMOTE button works as DVD function. Press the
[DVD] button, then the mode of DVD-Video Player becomes to the
OPERATION mode.

Press [VCR] button.

If VCR mode is correctly selected, DVD on the operation display
window goes out. Then, REMOTE button works as VCR function. Press
the [VCR] button, then it becomes to the VCR OPERATION mode.

Press [INPUT] button.

When you press [INPUT] button, BROADCASTING RECEPTION and EXTERNAL INPUT is selected. But, it
is not operated in PLAY, REC and DVD mode.

Call the player’s "SETUP".

1

Choose “VCR SETUP”.
And press the [OK] button.

2

Select “OSD ON/OFF”.
If you want OSD OFF mode, select it and press [OK] button to
confirm.
Then OSD characters are not displayed in the normal picture.

3

This player is set to “OSD (On Screen Display) ON” mode before shipping and you can change it
to OFF mode.

VCR SETUP
CLOCK SET
LANGUAGE SET
RF OUTPUT SET
16:9 SET
OSD ON/OFF
AUTO CLOCK

PR+/-:SELECT
OK:CONFIRM SETUP:END

OSD ON/OFF

ON
OFF

PR+/-:SELECT
OK:CONFIRM SETUP:END

SETUP

TIMER PROGRAM
PR PRESET
VCR SETUP
TAPE CONTROL

PR+/-:SELECT
OK:CONFIRM SETUP:END

OSD (On Screen Display) ON & OFF

To Select DVD

To Select VCR

To Select Watch Modes or External Input

■ Press [VCR] button on the remote control to change into VCR Mode and follow the procedure

below.

Call the player’s "SETUP",
choose "VCR SETUP", then "CLOCK SET".

1

Move to the position you want to change and type in the
new values.
Wait a few seconds after typing a one-digit number.

2

Store with [OK] button and exit with [SETUP] button.

CLOCK SET

0-9:SETUP (HOUR)

/➝:CORRECT SETUP:END

TIME - - : - ­DATE - - / - - /- - - -

CLOCK SET

0-9:SETUP (HOUR)

/➝:CORRECT

OK:CONFIRM SETUP:END

TIME 06:05
DATE 08/08/2004(SUN)

Auto clock

■ Auto Clock is only available for models with the VPS/PDC function (see page 26).

Some broadcasting stations may send the time and date along with the VPS/PDC data. The video will
automatically use this time and date during the initial setting up procedure during normal use, and every
time you switch the video off at the mains. If you find that this time and date is incorrect you can remove
this feature by following the steps below changing it to OFF mode, you will then have to manually set the
time and date, see above.

AUTO CLOCK

ON
OFF

PR+/-:SELECT
OK:CONFIRM SETUP:END

VCR SETUP

CLOCK SET
LANGUAGE SET
RF OUTPUT SET
16:9 SET
OSD ON/OFF
AUTO CLOCK

PR+/-:SELECT
OK:CONFIRM SETUP:END

Setting time and date

Setting Auto clock

➝

➝

VCR Playback

Basic Operation

2120

DVD Playback

Press [ ] button to power on.

Press [VCR] button of remote control to change into VCR mode.

Insert the desired tape.

If you want to playback it, press [PLAY/PAUSE] button.

When the operational status is flickering or poor, adjust it with [TRACKING
+/-] button.

1
2
3

To stop it, press [ ] button.

To stop, press [STOP] button in playback mode.

4

Press [EJECT] button in the front part or [OPEN/CLOSE] button on remote
control to remove the tape.

5

If the product, which has
a auto-detector, detects a
contaminated head(s), it
shows the conditions to
notice the contamination
on screen.

* In case of the notice on

screen, please rub the
heads with a head­cleaner followed by
“How to use a head­cleaner”.

Various Playback Methods

■ If you want fast forward (or reverse) playback, press [

√√√√

] or [

œœœœ

] button in

Playback mode. You can watch fast playing (rewinding) screen.

* NOTE: You might see no color noise band when you fast forward (or reverse)

playback the tape which is recorded in LP mode.

■ If you want Still picture, press [PLAY/PAUSE] in Playback mode. You can watch

the desired screen in pause status.

■ If you want slow-motion playback, press [

√√√√

] button in Pause mode. You can

watch the desired screen in the slow forward playback.

* NOTE: VCR doesn’t have Slow Reverse Playback function.

■ If you want to watch a series of screens one by one, (FRAME ADVANCE) press

[NEXT

√√√√

❚ ] button in Pause mode. Each time you press this button, the picture

advances one frame.

■ If you press [REPLAY] button in playback mode, the player quickly rewinds 15

seconds of the tape and plays it.

■ If you press [CM SKIP] button in playback mode, the player quickly skips 30

seconds of the tape and plays it.

To Adjust Display

This product includes automatic Tracking function and enables users to enjoy clear
picture without an additional operation. Provided that the following problems can be
solved by the manual adjustment, which improves display quality. (During automatic
display adjustment, “Adjusting Display” are displayed on TV screen.)

- If the screen is poor in Playback mode,

- If noises occur in the upper or lower part of screen in slow playback mode,

- If paused picture vibrates up and down.
Use [TRACKING +/-] buttons of remote control to adjust the display suitable for watching.

Press [ ] button to power on.

Press [DVD] button of REMOTE to change into DVD mode.

Press [OPEN/CLOSE] button to open the disc tray.

Place a disc firmly on the disc tray, making its label look upward.

Insert the disc and press [OPEN/CLOSE] button to close the tray.

The disc tray is closed and after checking the disc’s condition, Playback or Stop
function starts to operate.

1
2
3

To playback it, press [PLAY/PAUSE] button.

• In the case of DVD,
DVD menus and titles are displayed on TV screen.

• In the case of S-VCD and VCD2.0
the menus are displayed on TV screen and it is converted into PBC(Playback
Control) mode.

• In the case of CD, VCD1.1, MP3, DivX and JPG
the disc plays.

4

To stop it, press [ ] button.

To stop, press [STOP] button in playback mode.

5

Press [OPEN/CLOSE] button to remove the disc.

6

Various Playback Methods

■ If you want fast forward (or reverse) playback, press [

√√√√

] or [

œœœœ

]button in
Playback mode. You can watch fast playing (reverse ) screen.
* This reverse playback can be unavailable for certain DVD.

■ If you want slow (or reverse) playback, press [

√√√√

] or [

œœœœ

] button in Pause mode.

You can watch the desired screen in the slow forward (reverse) playback.

* For the case of VCD and DivX, this reverse slow playback function is unavailable.

The mark will appear.

■ If you want still picture, press [PAUSE] button in Playback mode. You can watch

the desired screen in Pause status.