■4-Channel high Power(40W×4Ch)
■Electronic Tuning
■Electronic Volume/Bass/Treble/Balance/ Fader
■42Memory Capability (18FM + 12MW + 12LW)
■Loudness & Mute Controls
■Full Detachable Face for Anti-Theft
■Panel Carrying Case Included
■ISO DIN Chassis for Easy Installation
INSTRUCTION MANUAL
CAR AUDIO
D-1200 CRC
CD Player/Receiver with 4-Channel High Power Output
Full Detachable Security Panel
WIRING CONNECTIONS
The pins in the ISO connector have the following functions
(connector seen from the rear)
A. ELECTRIC CONNECTIONS
1. Telephone Mute : BROWN
4. Back-up+12V : YELLOW
5. +12V (electric antenna) : BLUE
6. Dimmer : PINK
7. +12V supply(from ignition lock) : RED
8. Earth : BLACK
B. LOUD SPEAKER
1. +Right Rear : VIOLET
2. - Right Rear : VIOLET/BLACK
3. +Right Front : GRAY
4. - Right Front : GRAY/BLACK
5. +Left Front : WHITE
6. - Left Front : WHITE/BLACK
7. +Left Rear : GREEN
8. - Left Rear : GREEN/BLACK
C. LINE OUT (RCA JACK)
D. FUSE
10A
NOTE! The red cable must be connected via the car’s ignition lock to
prevent unwanted discharge of the battery if it is not used for
longer periods of time.
LINE OUT
RCA Jack
RED
WHITE
HOW TO INSTALL & REMOVE THE APPARATUS
1
NOTE !
●
Use only the supplied mounting hardware for safe and secure
installation.
●
Please consult your nearest dealer if you get any problems with
installation.
HOLDER
●
Insert the holder into the car radio slot. Fasten the holder by
pulling and bending the tabs which are located around the
holder as illustrated.
●
Press the release knob to open up the front panel and detach it by
pulling it towards you.
●
Insert the enclosed handles into the slits of the unit, as illustrated,
while pressing the handle lightly, then pull the unit out of the
holder.
FRONT PANEL
2
Replacement of the front panel
1. Hold the panel at its top and bottom edges.
2. Press the left side of the panel in first. Then press the right-hand
side in.
Keep in mind:
●
If any function does not work, take the panel off and put it back
again.
●
Do not touch the contact pins on the rear of the front panel, since
this can cause contact problems. If the contacts should become
dirty, they can be cleaned carefully with a soft rag.
●
Do not expose the front panel to extremes of heat or cold.
●
Petrol and other solvents must not come into contact with the front
panel.
●
The panel must not be subjected to external force, or dropped.
●
Never take the front panel apart.
Removal of the front panel
1. Press the panel lock button to undo the panel. (Always take the
cassette out first).
2. Pull the right-hand side of the panel and pull its straight out
sideways as shown by the arrow.
3. A red lamp flashes to tell that the equipment is theft-proofed
when the front panel has been removed.
4. Do not press the panel hard. Do not drop the panel.
5. Always keep the detached panel in the enclosed protection
device.
D-1200 CRC 2002.09.10 02:50오후 페이지4
3
FUNCTION DESCRIPTION, CONTROLS
1. POWER ON / OFF
2. AUDIO SELECTOR
3. TUNING & TRACK UP / DOWN
4. PRESET BUTTON
5. BAND CONTROL
6. AUT (AUTO TRAVEL PRESET)
7. LOUDNESS CONTROL & LOCAL STATION
8. DISPLAY / PTY
9. REGIONAL / AF
10. TA / TP STANDBY
11. CDP/CDC BUTTON
12. TOP
13. INTRO SCAN
14. REPEAT
15. RANDOM
16. DISC- / DOWN
17. DISC+ / UP
18. EJECT
19. LCD.
20. RELEASE BUTTON
③
⑪⑲
⑧⑨⑩⑳
②① ④
⑫
⑬⑭
⑮
⑯
⑰
⑱
⑦⑥⑤