CyClone SC51436, SCB51436, SC51430, SCB51430, SC50030 Use And Care Manual

USE AND CARE GUIDE

OPERATION INSTRUCTIONS

MODELS

SC(B)51436

Fan Operation

Fan Speeds: Three speed settings give the customer total control of their fan at the push of
a button.

Timer: This collection features a time-delay off feature to automatically shut the fan off after
1 to 9 minutes to conveniently clear the smoke and grease after cooking. To program the
time-delay feature, press the button with the clock icon while the machine is on and then use
the lowest speed setting button to toggle between 1 to 9 minutes.

Grease Disposal

WARNING!

still hot.

Nonstick-coated fan blades will separate grease from the air and the grease will then be

bag with the bracket and screws in the box. The grease cup can be used in conjunction with

Tip: Soak all parts in soapy water if there is heavy grease.

Changing Light bulbs

WARNING! Ensure that all power leading to your range hood has been disconnected

before changing bulbs. As well, ensure that lights have fully cooled before changing bulbs.
To change the light bulb, remove light case from the light socket. The light case can be

accessed from the inside of the body of the machine.

1.
Disconnect the connecting wires of the light socket from the motherboard wires. 2.

3.
remove the glass cover of the light case.

4. Detach light bulb and replace with a new bulb.

Power/Timer

Light

Control

Fan

Control

Fan Housing

WARNING! Ensure that all power leading to your range hood has been disconnected

Removal:

Disassembly:

cleaned in the top rack of the dishwasher.

Reassembly:

the knob into the nut.

MAINTENANCE

Cleaning

Mesh Filters:

soaking in the sink.

Exterior: The exterior of the machine can be maintained by wiping the surface area. Use a
stainless steel cleaner and a very gentle cloth for stainless steel machines.

REPLACEABLE PARTS

Fan Housing

NAME QTY DESCRIPTION IMAGE

WM 01 1

WM 05 2

Canopy Oil

Collector

Type G4 12V

20W

Light Socket Kit

WM 06 2

(Includes light, socket,

connecting wire)

FREQUENTLY ASKED QUESTIONS

When do I need a Cyclone Range Hood?

Peoples’ cooking habits vary, but getting rid of airborne contaminants

Whether it is steam from cooking soups, steaming vegetables, grease

ventilation in their kitchen

NAME QTY DESCRIPTION IMAGE

MFC 03 3 Mesh Filters

BFC 03 3

How often do I clean my Cyclone Range Hood?

Cyclone recommends that our range hoods are cleaned at least once
every month. However, cooking habits differ and cleaning should

.enoyreve rof tnatropmi si aera gnikooc ruoy ni regnil hcihw sruodo dna

Can I install a Cyclone Range Hood myself?

Installing a Cyclone Range Hood is fairly straightforward, and we
provide detailed installation instructions. We do not recommend
range hood installation for novices to electrical or handy work.

What is the minimum mounting height between the range top to
hood bottom?

The minimum mounting height between the range top to hood bottom
should be no less than 30”. The maximum mount height should be no
more than 36”. The hood must be installed at the correct mounting
height. Hoods mounted too low can result in heat damage, and hoods
mounted too high will have impaired performance.

pleasant aesthetic.

Cyclone canopy range hoods can accommodate to almost any ceiling
height. Extended chimney pieces can be purchased separately for
higher ceilings, and our chimneys can be custom cut to accommodate
shorter ceiling heights.

Cyclone Range Hoods Inc.

1361 Huntingwood Drive, Unit 16

Scarborough, ON M1S 3J1

Tel: [phone] or [phone] Fax [phone]

Email: [e-mail]

Website: www.CycloneRangeHoods.com