CyClone CY3000R Use And Care Manual

USE AND CARE GUIDE

OPERATION INSTRUCTIONS

Fan Operation

Fan Speeds: There are six speed settings. The screen will light up once the touch sensitive control

power button has been pressed. The rst button beside the screen to the left is the LOW speed setting

and on the opposite side is the HIGH speed setting button.

MODELS

CY3000R

Lights: The last button on the right is the light control. There are two light settings, simply press once for
high intensity and twice for low intensity.

Clock: To set the clock on the machine, start by turning the machine off. Press down the power bottom
until the screen begins to ash. Once it begins to ash, set clock by using the HIGH and LOW speed buttons. The LOW speed of the screen controls

the hours and the HIGH speed controls the minutes

Timer: The timer on the machine can be set while the machine is running at the desired speed level. Press down the power button until the screen
begins to ash and then use the HIGH/LOW buttons to set your desired timer up to 99 minutes.

Energy Saving Tip: If you are cooking on one side of the stove, turn the same side on HIGH while running the other fan on LOW.

Power

LOW

speed

Timer/24 Hour Clock

HIGH

speed

Light

Grease Disposal

wARNING! Do not remove grease cups immediately after cooking or if grease is still hot.

Your new fan features a unique, completely lter-less design. Oil and grease are separated from the
airow via non-stick coated fan blades. The grease is then pushed through rubber tubing into convenient
easily-removable grease cups for hassle-free, environmentally-friendly cleaning. Simply remove the
cups when grease builds up and clean them in the top rack of your dishwasher.

Tip: Soak all parts in soapy water if there is heavy grease.

Changing Lightbulbs

wARNING! Ensure that lights have fully cooled before changing bulbs.

Firmly press your ngers against the light bulb and twist in a clockwise direction until loosened.

MAINTENANCE

Cleaning

wARNING! Ensure that all power leading to your range hood has been disconnected

before cleaning your fan.

Fan Blades: Fill a spray bottle with a mixture of dishwasher soap and water and spray into the
fan blades while the machine is running. The soapy water will run the same path through the
machine as the grease, effectively cleaning all of its internal components. The cleaning solution
will be dispensed in the grease traps for convenient, hassle-free disposal.

Exterior: The exterior of the machine can be maintained by wiping the surface area. Use a
stainless steel cleaner and a very gentle cloth for stainless steel machines. A gentle cleaning
agent, such as Windex, and a damp cloth can be used to wipe and buff a machine with colored
nishes.

Fan Guard: To clean fan guard, unscrew two screws from the side of the fan guard, then soak
and hand-wash with dish soap.

REPLACEABLE PARTS

NAME QTY DESCRIPTION IMAGE

UM 05 2 Fan Guard

Grease

UM 08 2

Collector -

Rectangular

UM 17 2

Halogen

Lightbulb

FREQUENTLY ASKED QUESTIONS

When do I need a Cyclone Range Hood?

Peoples’ cooking habits vary, but getting rid of airborne contaminants

Whether it is steam from cooking soups steaming vegetables, grease

ventilation in their kitchen.

What is the difference between a round and rectangular opening?

The difference between the two shapes depends on the ductwork in your
home, and if applicable, the pre-cut hole in the cabinetry. Our Cyclone
Range Hood models with rectangular openings have an additional
optional opening in the back of the machine to vent directly out the
back, as required in some homes.

Can I install a range hood if my vent does not match the size or shape
of the range hood vent?

Our circular vents are 6 inches in diameter, and our rectangular vents

3 × 10 inches in size. In order to install a Cyclone Range Hood

are
with a different shaped vent, an adapter can be installed to adjust the
ducting to the correct shape. This is an additional part that needs to
be purchased and installed. Installing a range hood to a larger duct is
acceptable, although installing a range hood to a smaller duct work will
void the warranty.

NAME QTY DESCRIPTION IMAGE

UM 09 2

Oil Saucer -

Round

UM 02 1 Touch Panel

Can I install a Cyclone Range Hood myself?

Installing a Cyclone Range Hood is fairly straightforward, and we provide
detailed installation instructions. We do not recommend range hood

.enoyreve rof tnatropmi si aera gnikooc ruoy ni regnil hcihw sruodo dna

installation for novices to electrical o

What is the minimum mounting height between the range top to hood
bottom?

The minimum mounting height between the range top to hood bottom
should be no less than 30”. The maximum mount height should be
no more than 36”. The hood must be installed at the correct mounting
height. Hoods mounted too low can result in heat damage, and hoods
mounted too high will have impaired performance.

How often do I clean my Cyclone Range Hood?

Cyclone recommends that our range hoods are cleaned at least once

the frequency and intensity of cooking.

r handy work.

Cyclone Range Hoods Inc.

1361 Huntingwood Drive, Unit 16

Scarborough, ON M1S 3J1

Tel: [phone] or [phone] Fax [phone]

Email: [e-mail]

Website: www.CycloneRangeHoods.com