Cub Cadet 19A40037100 Operator's Manual
OPERATOR’S MANUAL
Cub Cadet Hybrid/UV Cart
19A40037100
WARNING
READ AND FOLLOW ALL SAFETY RULES AND INSTRUCTIONS IN THIS MANUAL
BEFORE ATTEMPTING TO OPERATE THIS MACHINE.
FAILURE TO COMPLY WITH THESE INSTRUCTIONS MAY RESULT IN PERSONAL INJURY.
CUB CADET LLC, P.O. BOX 361131 CLEVELAND, OHIO 44136-0019
Printed In USA
Form No. 769-11335
December 9, 2015
Safety Rules
This is the safety alert symbol. It is used to alert you to
potential personal injury hazards. Obey all safety messages
that follow this symbol to avoid possible injury or death.
Read and understand all safety rules and operating instructions before using this
tractor/ATV/UTV attachment.
Follow all safety rules and operating instructions provided by your vehicle's
manufacturer when using attachment.
Never allow children or untrained persons to operate vehicle or attachment.
Do not exceed the vehicle manufacturer's towed weight limit.
Reduce vehicle speed and allow extra stopping distance when towing heavy
loads.
Reduce vehicle speed and towed weight when operating on slopes.
Operate up and down slopes, never across the face of slopes.
Do not carry passengers on vehicle or attachment.
Avoid sudden turns or maneuvers.
Do not tow attachment on public roadways.
Do not remove warning decals from product.
Check product for worn, loose, or damaged parts before each use. If any damage
is present, repair the product before using.
Check product for loose or missing fasteners before each use. Tighten or replace
fasteners as needed before using.
Do not exceed vehicle speed of 20 miles per hour when towing Dump Cart.
Do not exceed Dump Cart rated weight capacity of 1250 pounds.
2
1
(x1)
33
Carton Contents
2
(x1)
3
(x1)
(x1)
11
12
(x2)
(x2)
20
(x1)
4
(x2)
10
13
(x4)
(x4)
14
(x8)
31
9
(x2)
(x2)
6
(x1)
15
34
(x12)
(x2)
16
(x12)
19
7
(x2)
(x1)
8
(x2)
5
(x2)
17
(x1)
TOOLS REQUIRED FOR ASSEMBLY:
1/2" Wrench and Socket
•
9/16" Wrench and Socket
•
Needle-Nose Pliers
•
Grease Gun
•
3
Assembly Instructions
1
2
Attach Undercarriage to Poly Body
and tighten hardware.
Attach Front Support to Poly Body
and tighten hardware.
14
1
2
15
16
13
3
3
Insert Stub Axles into Undercarriage and secure with pins as shown.
11
15
16
12
5
4
Loading...