Product Registration: Register your new product at http://warranty.harmanpro.com.
Obtaining Other Language Versions: To obtain information in another language about the use of this product, please contact your local HARMAN Professional
Distributor. If you need assistance locating your local distributor, please visit www.crownaudio.com/where_to_buy.
This manual does not include all of the details of design, production, or variations of the equipment. Nor does it cover every possible situation which may arise during
installation, operation or maintenance.
The information provided in this manual was deemed accurate as of the publication date. However, updates to this information may have occurred. To obtain the latest
version of this manual, please visit the Crown website at www.crownaudio.com.
Trademark Notice: Crown, Crown Audio, and Amcron are registered trademarks of Crown International. Other trademarks are the property of their respective owners.
Later versions of this manual and additional information about this product may be available at the Crown website at www.crownaudio.com.
Warranty & Product Registration: Register your new Crown amplifier at http://warranty.harmanpro.com
7. Do not block any ventilation openings. Install in accordance with the
manufacturer’s instructions.
8. Do not install near any heat sources such as radiators, heat registers,
stoves, or other apparatus (including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type
plug. A polarized plug has two blades with one wider than the other.
A grounding-type plug has two blades and a third grounding prong.
The wide blade or the third prong is provided for your safety. If the
provided plug does not fit into your outlet, consult an electrician for
replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched, particularly
at plugs, convenience receptacles, and the point where they exit from
the apparatus.
11. Only use attachments/accessories specified by the manufacturer.
12. Use only with a cart, stand, tripod, bracket, or table specified by the
manufacturer, or sold with the apparatus. When a cart is used, use
caution when moving the cart/apparatus combination to avoid injury
from tip-over.
13. Unplug this apparatus during lightning storms or when unused for
long periods of time.
14. Refer all servicing to qualified service personnel. Servicing is required
when the apparatus has been damaged in any way, such as powersupply cord or plug is damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus has been exposed to rain
or moisture, does not operate normally, or has been dropped.
15. Use the mains plug to disconnect the apparatus from the mains.
16. WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO
NOT EXPOSE THIS APPARATUS TO RAIN OR MOISTURE.
17. DO NOT EXPOSE THIS EQUIPMENT TO DRIPPING OR SPLASHING
AND ENSURE THAT NO OBJECTS FILLED WITH LIQUIDS, SUCH AS
VASES, ARE PLACED ON THE EQUIPMENT.
18. THE MAINS PLUG OF THE POWER SUPPLY CORD SHALL REMAIN
READILY OPERABLE.
TO PREVENT ELECTRIC SHOCK DO NOT REMOVE TOP OR BOTTOM
COVERS. NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL.
TO COMPLETELY DISCONNECT THIS EQUIPMENT FROM THE
AC MAINS, DISCONNECT THE POWER SUPPLY CORD PLUG FROM THE
AC RECEPTACLE. THE MAINS PLUG OF THE POWER SUPPLY CORD
SHALL REMAIN READILY OPERABLE.
WATCH FOR THESE SYMBOLS:
The lightning bolt triangle is used to alert the user to the risk of electric
shock.
The exclamation point triangle is used to alert the user to important
operating or maintenance instructions.
IMPORTANT
XLS Series amplifiers require Class 2 output wiring.
MAGNETIC FIELD
CAUTION! Do not locate sensitive high-gain equipment such as
preamplifiers or tape decks directly above or below the unit. Because this
amplifier has a high power density, it has a strong magnetic field which can
induce hum into unshielded devices that are located nearby. The field is
strongest just above and below the unit.
If an equipment rack is used, we recommend locating the amplifier(s) in
the bottom of the rack and the preamplifier or other sensitive equipment at
the top.
FCC COMPLIANCE NOTICE
This device complies with part 15 of the FCC rules. Operation is subject
to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
CAUTION: Changes or modifications not expressly approved by the
party responsible for compliance could void the user’s authority to
operate the equipment.
NOTE: This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment
generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instruction manual, may
cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or
more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
page 2
Operation Manual
XLS DriveCore 2 Series Power Amplifiers
DECLARATION OF CONFORMITY
Issued By: HARMAN International Inc.
1718 W. Mishawaka Rd.
Elkhart, IN 46517 U.S.A.
European Representative’s Name and Address:
HARMAN International
Cranborne Road Potters Bar,
EN6 3JN United Kindgom
Equipment Type: Power amplifiers
Family Name: XLS DriveCore 2 Series
Model Names: XLS 1002, XLS 1502, XLS 2002, XLS 2502
EMC Standards:
EN 55103-1:2009 +A1:2012 Electromagnetic Compatibility – Product Family Standard for Audio, Video, Audio-Visual and Entertainment Lighting Control Apparatus for
Professional Use, Part 1: Emissions
EN 55103-1:2009 +A1:2012 Magnetic Field Emissions-Annex A @ 10 cm and 1 M
EN 61000-3-2:2006 +A1:2008 +A2:2009 Limits for Harmonic Current Emissions (equipment input current ≤16A per phase)
EN 61000-3-3:2013 Limitation of Voltage Fluctuations and Flicker in Low-Voltage Supply Systems Rated Current ≤16A
EN 55022:2012 Limits and Methods of Measurement of Radio Disturbance Characteristics of ITE: Radiated, Class B Limits; Conducted, Class B
EN 55103-2:2009 Electromagnetic Compatibility – Product Family Standard for Audio, Video, Audio-Visual and Entertainment Lighting Control Apparatus for
Professional Use, Part 2: Immunity
EN 61000-4-2:2009 Ed 9 Electrostatic Discharge Immunity (Environment E2-Criteria B, 4k V Contact, 8k V Air Discharge)
EN 61000-4-3:2010 Ed 3.2 Radiated, Radio-Frequency, Electromagnetic Immunity (Environment E2, Criteria A)
EN 61000-4-4:2012 Ed 12 Electrical Fast Transient/Burst Immunity (Criteria B)
EN 61000-4-5:2014 Surge Immunity (Criteria B)
EN 61000-4-6:2009 Immunity to Conducted Disturbances Induced by Radio-Frequency Fields (Criteria A)
EN 61000-4-11:2004 Voltage Dips, Short Interruptions and Voltage Variation
FOR COMPLIANCE QUESTIONS ONLY:
Sue.Whitfield@harman.com
Safety Standard:
IEC 60065: 2002 +A12:2011, IEC 60065:2001 Ed 7 +A1:2010 Safety Requirements - Audio Video and Similar Electronic Apparatus
CAN/CSA 60065-03 incl. A1 Safety Requirements - Audio, Video, and Similar Electronic Apparatus
UL Std No. 60065-2007 Safety Requirements - Audio, Video, and Similar Electronic Apparatus
I certify that the product identified above conforms to the requirements of the EMC Council Directive 89/336/EEC as amended by 92/31/EEC,
and the Low Voltage Directive 73/23/EES as amended by 93/68/EEC.
Signed ______________________
Jeff Denman
Title: Sr. Director of Operations Date of Issue: April 1, 2015
Operation Manual
page 3
XLS DriveCore 2 Series Power Amplifiers
Table of Contents
Important Safety Instructions ............................................................................................................... 2
Declaration of Conformity ................................................................................................................... 3
Table of Contents ............................................................................................................................. 4
Service Return Authorization Request ..................................................................................................... 16
page 4
Operation Manual
XLS DriveCore 2 Series Power Amplifiers
Welcome
Crown XLS DriveCore 2 Series amplifiers define the standard for portable PA systems with unmatched performance, technology and affordability that effortlessly deliver
night after night. We packed XLS with enormous flexibility, thanks to a wide range of features ranging from Peak
on each channel. The XLS weighs less than 11 lbs (5 kg), making it the most featured packed amplifier for the weight on the market.
Beyond the amazing technology and performance, we wanted to make these high performance amplifiers the best looking in any environment. The new XLS DriveCore
2 Series has a finely crafted aluminum bezel that now allows you to turn off lighting for a stealth look and remotely trigger sleep mode for remote applications through a
contact closure.
TM
Limiters to DSP functionality that allows Band Pass filters
x
Features
• High performance, lightweight Class-D amplifier powered by DriveCore Technology
• XLR, ¼”, RCA inputs ensure compatibility with any source
• Expanded DSP with Band Pass filters
• User controllable lighting and a display sleep function
• Selectable 1.4Vrms or .775Vrms input sensitivity to drive any source to full power
• Remote power control through a contact closure
• Crown No-Fault Fully-Transferable 3-year Warranty completely protects your investment
How to Use This Manual
This manual provides you with the necessary information to safely and correctly setup and operate your amplifier. It does not cover every aspect of installation, setup or
operation that might occur under every condition. For additional information, please contact technical support, your system installer or retailer.
We strongly recommend you read all instructions, warnings and cautions contained in this manual. Also for your protection, please save your bill of sale — it’s your official
proof of purchase.
Operation Manual
page 5
Front Panel Features
Indicators:
Signal Presence Indicator: Two green LED’s, one for each channel, illuminate when the channel input
signal exceeds -40dBu.
-20 Indicator: Green LED flashes when output signal level exceeds -20dB below clip.
-10 Indicator: Green LED flashes when output signal level exceeds -10dB below clip.
Cooling Vents:
Front to rear forced air flow.
Clip Indicator: Two red LED’s, one for each channel, illuminate when the channel’s output is being overdriven.
Thermal Indicator: Two red LED’s, one for each channel, illuminate when thermal compression begins.
XLS DriveCore 2 Series Power Amplifiers
Blue LEDs:
LEDs will illuminate when
power is turned on or blink
while in sleep mode.
Gain (Level) Controls:
Two black rotary level controls,
one for each channel.
Back Panel Features
Binding Post Output Jacks:
One pair per channel, accepts banana plugs or
bare wire. Note: Binding post outputs on European
models come with safety plugs installed to prevent
European power plugs from being inserted. The
Circuit Breaker:
Provides overload protection.
side entry positions for these connectors should
be used with European models.
Menu/Prev/Next:
Three buttons located near the
LCD screen that are used to
configure and access the
integrated processing.
LCD Screen:
Back-lit LCD screen allows for
crossover configuration,
amplifier mode configuration,
and system configuration.
Fans:
Provide front to back
forced airow for cooling.
Power Button
Turns amplifier power on and off.
RCA (Phono) Inputs:
Two RCA inputs are provided
(one per channel).
AC Power
Connector
page 6
AUX Connector
Allows sleep mode
with a contact closure
between pins 1 & 2.
Amp status signal
available at pin 3.
4-Pole Speakon® Output Connectors:
Two - 1/4 inch input connectors accept 2-pole or
4-pole Speakon connectors. The Channel 1
connector is wired for both channels so it can be
used for BRIDGE mode wiring or stereo wiring of
two speakers to a single Speakon.
¼ Inch Inputs:
2 – ¼ Inch input connectors
are provided (one per
channel). These inputs can
also be used to loop-thru
signal to additional ampliers.
Balanced XLR Inputs:
Two 3-pin XLR input
connectors are provided
(one per channel).
Operation Manual
Loading...
+ 14 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.