Crown XLS1002 User Manual
XLS DriveCore™ 2 Series
Features
Meet the new XLS DriveCore 2 Series.
The next generation of XLS got a
makeover with a sleek new look,
larger LCD display, and more DSP
with extended functionality. Like its
predecessor, the new XLS is ultra-efficient
with Crown’s patented DriveCore
technology and can drive 2400W at
4Ω bridged with tons of headroom
guaranteeing a clean, undistorted
signal straight to your speakers. The
XLS DriveCore 2 assures that you will
be heard as you deliver powerful, pure
sound experiences for any venue.
\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\
• Class D amp with Crown's ultraefficient DriveCore technology
weighs less than 11 lbs (5 kg)
• Higher DSP capabilities: More control;
has band pass filter per channel
• Increased lighting functionality;
turn off display or any/all LED
indicators except clip and thermal to
reduce distraction in dark venues
• Selectable input sensitivity; 1.4Vrms
and .775Vrms options so that
amp can be driven at full power
• Set display sleep mode after specified
time without having to press a button
• Security setting disables menu
buttons; menu locked/unlocked
by entering button combination
• System reset allows factory
settings to be restored
• Remote power trigger
• Peakx™ Limiters provide maximum
output while protecting your speakers
• XLR, 1/4", RCA inputs
provide flexibility
• Integrated PureBand™
Crossover System for better
performance and control
• Efficient forced-air fans prevent
excessive thermal buildup
XLS DriveCore™ 2 Seriess
\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\
XLS 2502
Power Matrix
Model Channels 2Ω Dual 4Ω Dual 8Ω Dual 4Ω Bridged 8Ω Bridged
1002 2 550W 350W 215W 1100W 700W
1502 2 775W 525W 300W 1550W 1050W
2002 2 1050W 650W 375W 2100W 1300W
2502 2 1200W 775W 440W 2400W 1550W
*Maximum average power in watts at 0.5% THD, 1kHz
Performance
Specications
Sensitivity
Frequency Response
(at 1W, 20Hz to 20kHz)
Signal to Noise Ratio
(rated as dBr to full rated 8Ω
power output; A-Weighted
Total Harmonic Distortion
(THD)
Intermodulation Distortion
(60Hz and 7kHz at 4:1) from
full rated output to -30dB
Damping Factor
(8Ω, 10Hz ~ 400Hz)
Crosstalk
(below reated 8Ω power)
Physical Specications
Width
Height
Depth
Net Weight
Shipping Weight
*At .775Vrms sensitivity, Signal to Noise is 6dB lower.
XLS 1002 XLS 1502 XLS 2002 XLS 2502
.775Vrms or
1.4Vrms
+0dB, -1dB +0dB, -1dB +0dB, -1dB +0dB, -1dB
>97dB* >103dB* >103dB* >103dB*
>0.5% >0.5% >0.5% >0.5%
<0.3% <0.3% <0.3% <0.3%
>200 >200 >200 >200
At 1kHz: > 85dB
At 20kHz: > 55dB
19 in. (48.3 cm) 19 in. (48.3 cm) 19 in. (48.3 cm) 19 in. (48.3 cm)
3.5 in. (8.9 cm) 3.5 in. (8.9 cm) 3.5 in. (8.9 cm) 3.5 in. (8.9 cm)
7.7 in. (19.6 cm) 7.7 in. (19.6 cm) 10.7 in. (27.2 cm) 10.7 in. (27.2 cm)
8.6 lbs (3.9 kg) 8.6 lbs (3.9 kg) 10.8 lbs (4.9 kg) 10.8 lbs (4.9 kg)
13.6 lbs (6.2 kg) 13.6 lbs (6.2 kg) 15.8 lbs (7.2 kg) 15.8 lbs (7.2 kg)
.775Vrms or
1.4Vrms
At 1kHz: > 85dB
At 20kHz: > 55dB
.775Vrms or
1.4Vrms
At 1kHz: > 85dB
At 20kHz: > 55dB
.775Vrms or
1.4Vrms
At 1kHz: > 85dB
At 20kHz: > 55dB
Specifications subject to change without prior notice. Latest information available at www.crownaudio.com. Crown offers a three-year, no-fault, fully transferable warranty for every new Crown amplifier – an unsurpassed industry standard. With this unprecedented no-fault protection, your new Crown
amplifier is warranted to meet or exceed original specifications for the first three years of ownership. During this time, if your amplifier fails, or does not perform to original specifications, it will be repaired or replaced at our expense. In most cases, the only things not covered by this warranty are those
losses normally covered by insurance and those caused by intentional abuse. Plus, the coverage is transferable, should you sell your amplifier. See your authorized Crown dealer for full warranty disclosure and details. For customers outside of the USA, please contact your authorized Crown distributors for
warranty information or call 574-294-8200. © 2015 Crown Audio®, Inc.
Loading...