Crown I-Tech I-T6000, I-Tech 6000 Supplementary Manual
I-TECH SERIES
I-T6000
AC Power Draw and Thermal Dissipation
This datasheet provides detailed information about the amount of power
and current drawn from the AC mains by the I-T6000 amplifi er, and the
amount of heat produced under various conditions. The measurements
presented here are intended to provide a realistic and reliable depiction
of the amplifi er.
I-Tech 6000 AC Current Draw and Thermal Dissipation:
Pink noise 12dB crest factor, bandwidth limited 22Hz to 22kHz.
Typical line impedance used.
Data based on both channels driven.
120VAC 208VAC 230VAC
Watts Out
Line Current
Idle (sleep mode) 1.0 1.0 0.95 60 205 177
Idle (awake) 2.1 1.7 1.6 225 767 660
1/8th Power Pink Noise 8 Ohms/Ch.
Typical of program material 16 Ohms Bridge
just at clip. 4 Ohms/Ch.
1/3rd Power Pink Noise 8 Ohms/Ch.
Typical of program material 16 Ohms Bridge
with severe clipping. 4 Ohms/Ch.
Load
8 Ohms Bridge
2 Ohms/Ch.
4 Ohms Bridge
8 Ohms Bridge
2 Ohms/Ch.
4 Ohms Bridge
120VAC
6.6 4.2 3.857.6 91.2 99.8 392 1338 337
11.6 7.0 6.365.7 108.8 120.4
11.5 6.8 6.255.9 96.5 105.3 2373 598
13.6 8.1 7.474.4 125.3 137.2
27.6 16.0 14.373.9 127.2 141.0
Per 1A
Amp Line
Current
I-T6000
Watts Out
Line Current
208VAC
14.9 13.667.0 113.5 4173 105225.0 1223124.3
Per 1A
Amp Line
Current
Line Current
230VAC
Watts Out
Per 1A
Amp Line
Current
Thermal Dissipation
Watts
Dissipated
593 2024 510
695
579 1977 498
1149 3921 988
Btu/hr kcal/hr
Crown International
P.O. Box 1000
Elkhart, IN 46515-1000
TEL: 574-294-8200
FAX: 574-294-8FAX
www.crownaudio.com
Specifi cations subject to change without prior notice. Latest
information available at www.crownaudio.com.
Crown and Crown Audio are registered trademarks of
Crown International. Other trademarks are the property
of their respective owners.
Printed in U.S.A. © 2004 Crown Audio, Inc.
3/04 137434-1
Loading...