Crown IQPIPUSP-2 Owners manual
IQ-PIP-USP2 ADAPTER
INSTALLATION
MANUAL
© 2002 by Crown Audio Inc., P.O. Box 1000, Elkhart, Indiana 46515-1000 U.S.A. Telephone:
574-294-8000. Trademark Notice: PIP and PIP2 are trademarks and Com-Tech, Crown, IQ
System and Macro-Tech are registered trademarks of Crown International. Other trademarks
are the property of their respective owners.
133394-2
10/02
Rev. B
IQ-PIP-USP2 Adapter
Installation Manual
The information furnished in this manual does not include all of the details of design, production, or
variations of the equipment. Nor does it cover every possible situation which may arise during installation,
operation or maintenance. If you need special assistance beyond the scope of this manual, please contact
the Crown Technical Support Group.
Mail: P.O. Box 1000 Elkhart IN 46515-1000
Shipping: 1718 W. Mishawaka Road Elkhart IN 46517
Phone: (800) 342-6939 / (574) 294-8200
FAX: (574) 294-8301
133394-2 Rev. B
CAUTION
TO PREVENT ELECTRIC SHOCK DO
NOT REMOVE TOP OR BOTTOM
COVERS. NO USER SERVICEABLE
PARTS INSIDE. REFER SERVICING
TO QUALIFIED SERVICE PERSON-
NEL. DISCONNECT POWER CORD
BEFORE REMOVING REAR INPUT
MODULE TO ACCESS GAIN SWITCH.
WARNING
TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT EXPOSE THIS
EQUIPMENT TO RAIN OR MOISTURE!
AVIS
À PRÉVENIR LE CHOC
ÉLECTRIQUE N’ENLEVEZ
PAS LES COUVERTURES.
RIEN DES PARTIES UTILES
À L’INTÉRIEUR.
DÉBRANCHER LA BORNE
AVANT D’OUVRIR LA
MODULE EN ARRIÈRE.
The lightning bolt triangle is used to alert
the user to the risk of
electric shock.
2
The exclamation point triangle is used to alert the user to
important operating or maintenance instructions.
© 2002 Crown Audio, Inc.
133394-2 Rev. B
IQ-PIP-USP2 Adapter
Installation Manual
Revision History
Revision Number
Rev. A
Rev. B
Date
8-2001
10-2002
Comments
Initial Printing
Revised date, rev level,
Crown logo, area code,
Section 1.2, Section 3.2,
and Figure 3.3.
© 2002 Crown Audio, Inc.
3
IQ-PIP-USP2 Adapter
Installation Manual
1 Introduction.............................................................................. 5
1.1 Introduction ..............................................................................................5
1.2 The IQ-PIP-USP2 Adapter .......................................................................5
1.3 Warranty................................................................................................... 5
2 Controls and Connectors .............................................................. 6
3 Installation .............................................................................. 7
3.1 General Information ................................................................................. 7
3.2 Prepare the Adapter ................................................................................ 7
3.3 Prepare the Amplifi er ............................................................................... 7
3.4 Install the Adapter.................................................................................... 8
3.5 Install the PIP IQ-PIP-USP2 Module......................................................... 8
4 Operation ................................................................................ 9
4.1 Identifi cation within IQ for Windows......................................................... 9
4.2 Feature Differences..................................................................................9
4.2.1 Fault and Load Error Reporting .....................................................9
4.2.2 Load Supervision ........................................................................... 9
4.2.3 Peak Voltage and Average Power Voltage Limiters.....................10
133394-2 Rev. B
Table of Contents
4
© 2002 Crown Audio, Inc.
Loading...