Crown G160MA, G135MA User Manual
135MA & 160MA
Features
The Crown 135MA and 160MA
are high-value mixer-amplifiers for
commercial audio. They provide
8Ω and constant-voltage outputs
(70Vrms and 100Vrms) and can
be used for paging, background
music, or on-hold music.
\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\
• 3 inputs (each with a volume
control), and one 35W amplifier
output channel in 135MA
• 4 inputs (each with a volume
control), and one 60W amplifier
output channel in 160MA
• Balanced Phoenix-type mic/line
input, telephone output, dual
RCA stereo music inputs, screwterminal speaker outputs
• Priority muting by VOX or
external switch
• Bass and treble controls on
master output
135MA & 160MA
\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\
100V-240VAC~
95W 50/60Hz
135MA back panel
100V
70V
8
COM
1 - CH1
MicOn/LineO
2 - CH1 Normal
3 - CH1 Priority
4 - CH1 to MOH
PREAMP
OUTPUT
5 - CH1 to MOH
6 - CH2 to MOH
7 - CH3 to MOH
8 - Phantom
TELEPHONE
(MOH)
8 600
Input 1
Input 3
Input 2
PRIORITY
Performance Specications
Frequency Response
(at 1W from line out)
Signal Noise Ratio (ref. to
rated power, master volume
at minimum)
THD + N
Input Sensitivity (for full
output at maximum gain)
Crosstalk (at 1kHz)
Line Output Level (nominal)
Phantom Power
Physical Specications
Width
Height
Depth
Weight
135MA 160MA
50Hz to 20Hz ± 1dB
19Hz to 34kHz +0, -3dB
Mic: >58dB
Line: >60dB
Telephone: >60dB
Inputs 2 or 3: >78dB
<0.5% at rated power at 1kHz
<0.1% at 5W at 1kHz
Input 1: Mic 3mV, Line 800mV
Input 2: 400mV
Input 3: 400mV
-82dB -82dB
1V into 10kΩ 1V into 10kΩ
15 VDC 15 VDC
9.5 in (24.1 cm) 9.5 in (24.1 cm)
4.1 (10.5 cm) 4.1 (10.5 cm)
13.9 in (35.2 cm) 13.9 in (35.2 cm)
8lb (3.7kg) 12lb (5.6kg)
50Hz to 20Hz ± 1dB
19Hz to 34kHz +0, -3dB
Telephone: >60dB
Inputs 2, 3 or 4: >78dB
<0.5% at rated power at 1kHz
<0.1% at 5W at 1kHz
Input 1: Mic 3mV, Line 800mV
Input 2: 400mV
Input 3: 400mV
Input 4: 400mV
Mic: >58dB
Line: >60dB
100V-240VAC~
150W 50/60Hz
160MA back panel
Power Matrix
Model
135MA 3 35W
160MA 4 60W
*1kHz Power: refers to maximum power in watts at 1kHz with 0.5% THD
Specifications subject to change without prior notice. Latest information available at www.crownaudio.com. Crown offers a three-year, no-fault, fully transferable warranty for every new Crown amplifier – an unsurpassed industry standard. With this unprecedented no-fault protection, your new Crown
amplifier is warranted to meet or exceed original specifications for the first three years of ownership. During this time, if your amplifier fails, or does not perform to original specifications, it will be repaired or replaced at our expense. In most cases, the only things not covered by this warranty are those
losses normally covered by insurance and those caused by intentional abuse. Plus, the coverage is transferable, should you sell your amplifier. See your authorized Crown dealer for full warranty disclosure and details. For customers outside of the USA, please contact your authorized Crown distributors for
warranty information or call 574-294-8200. © 2015 Crown Audio®, Inc.
Channels
8Ω
Loading...