1.2.2 Starting the car: Please follow up the following instruction to start the car:
Firstly, release the brake for station and insert the key then turn the power key switch to “ ON”(See
picture 1.2.2).
Secondly, push the “ Direction choice” button to “ Forward” location(See picture 1.2.2) and step
on the accelerator equably then you can start the car.
ATTENTION: Do not speed quickly when start to avoid any accident.
The location of ON The forward location Reverse silent switch
Picture 1.2.2
1.2.3 .Reverse: Turn the key to the on location then press the direction switch to backward location (see
picture 1.2.3) . In the meantime, the buzzer is working. (if do not need buzzer works when reverse, you
can press the reverse silent switch). Then step on the accelerator equably to reverse the car.
ATTENTION: Do not speed quickly when start to avoid any accident.
The location of OFF The backward location
Picture 1.2.3
1.3.4 Stopping: After stop the car, make sure to press the direction switch to the middle location and
turn the key to “OFF” position then step on the brake location, and then remove key from the vehicle.
1.2.5 During driving, please choose the speed according to different roads. This car has electric brake
function, the speed increases in direct ratio with the corner of the accelerator, Contrariwise, the speed
decreases. When climbing down, loosen the accelerator absolutely, the car will slide at the speed of
2-3Km/H, so it is necessary to use the stop brake to assistant. When drive the car in the flat road, just
loosen absolutely the accelerator to stop the car.
DO NOT ADJUST FORWARD AND BACKWARD DIRECTLY DURING DRIVING, the sudden