crown Crown DSi 6000 crown dsi6000 spec

DSi Series

Features

• Includes four models of 475W,
800W, 1200W and 2100W per

channel at 4Ω

• Automatic presets for popular JBL
cinema speaker systems for quick,
easy configuration

• Intuitive front-panel LCD screen
guides installers through setup

\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\

• Onboard digital signal processing
(DSP) includes crossovers, EQ filters,
delay, and output limiting

• Computer connectivity via USB
allows fast setup and configuration
with HiQnet™ software

• Rear-panel HD-15 connector
provides easy input/output
connectivity between DSi amplifiers
and DSi-8M system monitor

• All models are THX® approved

• Switch-mode universal power supply

• All products fill 2U rack spaces and
weigh under 25 pounds

• Barrier strip outputs, removable
Phoenix-style input

DSi Series

\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\

DSi 1000, 2000, 4000

DSi 6000

Power Matrix

Model

Channels

2Ω 4Ω 8Ω 4Ω 8Ω

Dual (per ch.) Bridge

1000 2 700W* 475W 275W 1400W* 950W

2000 2 1000W* 800W 475W 2000W* 1600W

4000 2 1450W* 1200W 650W 3000W* 2400W

6000 2 3000W* 2100W 1200W 6000W* 4200W

With 0.5% THD *With 1% THD

Performance Specications

Voltage Gain at 1kHz

Frequency Response
(at 1W, 20Hz to 20kHz

into 4 Ω)

Sensitivity

Signal to Noise Ratio
(below rated 8Ω power
at 1kHz, A-weighted)

Damping Factor
(20Hz to 400Hz)

Frequency Response
(at 1W, 20Hz to 20kHz)

Crosstalk (below rated
power) 20Hz to 1kHz

Input Impedance (nominal)

AC Line Voltage and
Frequency Configurations
Available

Physical Specications

Width

Height

Depth

Net Weight

Shipping Weight

1000 2000 4000 6000

30.5dB 32.9dB 34.2dB 37.1dB

+0dB, –1dB +0dB, –1dB +0dB, –1dB +0dB, –1dB

8Ω: 1.4V
4Ω: 1.3V
2Ω: 1.1V

100dB 100dB 100dB 103dB

>500 >500 >500 >500

+0dB, –1dB +0dB, –1dB +0dB, –1dB +0dB, –1dB

>70dB >70dB >70dB >70dB

20kΩ balanced,

10kΩ unbalanced

19 in. (48.3 cm) 19 in. (48.3 cm) 19 in. (48.3 cm) 19 in. (48.3 cm)

3.5 in. (8.9 cm) 3.5 in. (8.9 cm) 3.5 in. (8.9 cm) 3.5 in. (8.9 cm)

12.5 in. (31.8 cm) 12.5 in. (31.8 cm) 12.5 in. (31.8 cm) 16.2 in. (41.1 cm)

19lbs (8.61kg) 19lbs (8.61kg) 19lbs (8.61kg) 24lbs (10.89kg)

22lbs (9.97kg) 22lbs (9.97kg) 22lbs (9.97kg) 30lbs (13.60kg)

8Ω: 1.4V
4Ω: 1.2V
2Ω: 1.0V

20kΩ balanced,

10kΩ unbalanced

100V, 120V, 220-240V, 50/60 Hz

20kΩ balanced,

10kΩ unbalanced

8Ω: 1.4V
4Ω: 1.3V
2Ω: 1.0V

8Ω: 1.4V
4Ω: 1.3V
2Ω: 1.1V

20kΩ balanced,

10kΩ unbalanced

Specifications subject to change without prior notice. Latest information available at www.crownaudio.com. Crown offers a three-year, no-fault, fully transferable warranty for every new Crown amplifier – an unsurpassed industry standard. With this unprecedented no-fault protection, your new Crown
amplifier is warranted to meet or exceed original specifications for the first three years of ownership. During this time, if your amplifier fails, or does not perform to original specifications, it will be repaired or replaced at our expense. In most cases, the only things not covered by this warranty are those
losses normally covered by insurance and those caused by intentional abuse. Plus, the coverage is transferable, should you sell your amplifier. See your authorized Crown dealer for full warranty disclosure and details. For customers outside of the USA, please contact your authorized Crown distributors for
warranty information or call 574-294-8200. © 2015 Crown Audio®, Inc.