1001 Echols Street, Bismarck, MO 63624-9095
Model 1700
Hot Dog Broiler MANUAL
100 Volt, Single Phase, 50/60 Hz
120 Volt, Single Phase, 60 Hz
230 Volt, Single Phase, 50 Hz
READ and UNDERSTAND these operating and safety instructions before operating this machine.
Hot Dog Broiler
|
TABLE OF CONTENTS |
|
I. |
INTRODUCTION .................................................................................................. |
3 |
II. |
SAFETY ALERT SYMBOL .................................................................................... |
3 |
III. |
SAFETY FIRST........................................................................................................ |
3 |
IV. |
PURPOSE OF MANUAL ...................................................................................... |
3 |
V. |
PRODUCT INDENTIFICATION......................................................................... |
4 |
VI. |
THEORY AND OBSERVATIONS OF BROILER OPERATION...................... |
4 |
VII. |
CONTROL SWITCHES ......................................................................................... |
4 |
VIII. |
INSTALLATION INSTRUCTIONS..................................................................... |
5 |
|
Replacement Parts List .......................................................................................... |
6 |
|
Exploded Parts Drawing (Unit) – Figure A........................................................ |
7 |
|
Exploded Parts Drawing (Rack) – Figure B........................................................ |
8 |
|
Wiring Diagram...................................................................................................... |
9 |
IX. |
OPERATING INSTRUCTIONS............................................................................ |
10 |
X. |
SANITATION INSTRUCTIONS.......................................................................... |
11 |
XI. |
DISASSEMBLY AND MAINTENANCE INSTRUCTIONS............................. |
11 |
|
Troubleshooting ..................................................................................................... |
13 |
XII. |
GENERAL INFORMATION ................................................................................ |
14 |
Revised 2/24/2006 |
2 |
Hot Dog Broiler
I INTRODUCTION
This manual contains information regarding your Echols Model 1700 Hot Dog Broiler. There is nothing, however, more important than the safety aids and warnings that are found throughout this document. The Safety Alert Symbol is used to identify topics of primary safety concern wherever they appear.
If, after reviewing this manual, anything is unclear or technical problems are encountered, contact the dealer from whom you purchased your machine for assistance; and, if there are any additional questions, feel free to contact our Customer Service Department at 800-840-6166. Always have the serial number of your machine available to assist in obtaining the correct information.
II SAFETY ALERT SYMBOL
The symbol shown below is used to call your attention to instructions concerning your personal safety and the safety of others. Watch this symbol. It points out important safety precautions. It means "ATTENTION! Become Alert! Your personal safety is involved!" Read the message that follows and be alert to the risk of personal injury or death.
III SAFETY FIRST
The information in this manual is essential for the safe installation and maintenance of your Hot Dog machine. The manual must be read and understood before installing, operating or maintaining this equipment, or equivalent training must be provided.
"The employer shall instruct each employee in the recognition and avoidance of unsafe conditions and the regulations applicable to his work environment to control or eliminate any hazards or other exposure to illness or injury. “ Ref.: 29 CFR 1926.20 (b)(4)(a)(2)
It is understood that safety rules within individual companies vary. If a conflict exists between the safety procedures contained in this manual and the rules of a using company, the more stringent rule should take precedence.
IV PURPOSE OF MANUAL
This instruction manual is intended to familiarize owners with the operation and safety procedures associated with your Hot Dog Broiler.
This manual should be kept available to operating and maintenance personnel.
Revised 2/24/2006 |
3 |
Hot Dog Broiler
A person who has not read and understood all operating and safety instructions is not qualified to operate the machine.
V PRODUCT INDENTIFICATION
ECHOLS HOT DOG BROILER
MODEL |
1700 – HOT DOG BROILER |
|
Electrical: |
100 Volt, 50/60 Cycle, 12 Amp, 1200 Watts |
|
|
120 Volt, 60 |
Cycle, 10 Amp, 1200 Watts |
|
230 Volt, 50 |
Cycle, 5.5 Amp, 1200 Watts |
VI THEORY AND OBSERVATIONS OF BROILER OPERATION
The Hot Dog Broiler is designed for any concession application for re-heating hot dogs or frankfurters and other pre-cooked sausages. Hot dogs/frankfurters must be completely defrosted before cooking. The unit also includes a bun steaming feature, where hot dog buns are steamed in the upper section of the broiler.
This equipment is designed and sold for commercial use by trained personnel. It is NOT intended for use by the general public in a self-service environment.
The Hot Dog Broiler operates on a “heat and hold” principle. The broiler will heat the sausages in a matter of minutes and hold them for several hours with little or no deterioration in appearance or taste. This unique feature allows the Hot Dog Broiler to maximize the merchandising potential with the minimum of supervision. If there are any signs of deterioration, the broiler temperature should be lowered, see “Operating Instructions, Step F.”
VII CONTROL SWITCHES
MAIN POWER SWITCH |
-Turns broiler heat and rack rotation ON/OFF |
MOMENTARY PAUSE SWITCH |
-Pauses rotation of the hot dog rack |
TEMPERATURE CONTROL |
-Controls the temperature of the unit |
Revised 2/24/2006 |
4 |
Hot Dog Broiler
VIII INSTALLATION INSTRUCTIONS
A.Location
Choose a location for your Hot Dog Broiler to maximize the ease of operation and maintenance procedures. Check your local building and fire codes for location restrictions.
B.Power Supply
The Echols Hot Dog Broiler requires a 120-volt power supply. Use a GROUNDED 120-VOLT CIRCUIT WITH A 15-AMP BREAKER or FUSE.
THIS UNIT IS NOT FUSED. Be sure to connect it to a grounded 120-volt CIRCUIT WITH A 15-AMP BREAKER OR FUSE.
Connect your broiler only to the correct power source.
Make certain the Main Power Switch on the broiler is in the 'OFF' position when plugging into power source.
C.Assembly instructions
1.Remove unit from carton and recycle any packing material.
2.Place the unit on a level counter surface.
3.Remove rack assembly from interior packaging, and install into unit, making sure the actuation levers on the dog baskets are toward the left side of the unit and engage with the trip fingers (SEE FIGURE A). The slot in the end of the center shaft (ITEM 13) should align with the cross pin in the Motor Drive Adapter (ITEM 18), and the groove in the pin at the right end aligns with the Rack Support Bar (ITEM 16).
4.Plug the power cord (WIRING DIAGRAM, ITEM 28) into a grounded outlet, and turn the main power switch (WIRING DIAGRAM, ITEM 25) on to check for power.
Revised 2/24/2006 |
5 |
Loading...