Crestron PW-2420RU User Manual

Crestron PW-2420RU
Power Pack
Operations Guide

Crestron PW-2420RU Power Pack

Power Pack: PW-2420RU

Description

The PW-2420RU is capable of powering a regulated 24-volt Crestron product from a
standard AC receptacle (120V, 60 Hz or 220V – 240V, 50 Hz). It is designed for indoor use
only.

NOTE: Only connect this power pack to a Crestron device that is rated at 24 volts
(regulated) and no more than 2 amps. Plugging this power pack into a Crestron device that
has a different rating could damage the device or the pack.

Specifications

Crestron suggests that only this power pack be used with designated Crestron products. In the
event another compatible power pack (not supplied by Crestron) is required, the
specifications are as follows.

Input/Output Specifications

INPUT SPECS OUTPUT SPECS

120VAC 60Hz

230VAC 50Hz

The polarity of the PW-2420RU is illustrated below.

or 24VDC 2A minimum, regulated

Setup

Complete the following steps to properly setup and connect the power pack. Refer to the
illustration at the conclusion of the procedure.

1. Attach the line cord (supplied) to the IEC320 connector on the power pack.

Operations Guide - DOC. 5892 Power Pack: PW-2420RU • 1

Power Pack Crestron PW-2420RU

2. Insert other end of the line cord into an active AC receptacle.

3. Insert the PW-2420RU plug into the DC power socket connector of a Crestron
device.

Power Pack Hookup

AC

RECEPTACLE

Further Inquiries

If after reviewing this Operations Guide for this power pack, you cannot locate specific
information or have questions, please take advantage of Crestron's award winning customer
service team by calling:

LINE CORD
(SUPPLIED)

CRESTRON DEVICE

PW-2420

PW-2420RU

24VDC 2.0A

PLUG

• In the US and Canada, call Crestron’s corporate headquarters at
1-888-CRESTRON [1-888-273-7876].

• In Europe, call Crestron International at [phone].

• In Asia, call Crestron Asia at [phone].

• In Latin America, call Crestron Latin America at [phone].

• In Australia and New Zealand, call Crestron Control Solutions at

[phone].

2 • Power Pack: PW-2420RU Operations Guide - DOC. 5892

Return and Warranty Policies

Merchandise Returns / Repair Service

1. No merchandise may be returned for credit, exchange, or service without prior
authorization from CRESTRON. To obtain warranty service for CRESTRON products,
contact the factory and request an RMA (Return Merchandise Authorization) number.
Enclose a note specifying the nature of the problem, name and phone number of contact
person, RMA number, and return address.

2. Products may be returned for credit, exchange, or service with a CRESTRON Return
Merchandise Authorization (RMA) number. Authorized returns must be shipped freight
prepaid to CRESTRON, 6 Volvo Drive, Rockleigh, N.J., or its authorized subsidiaries,
with RMA number clearly marked on the outside of all cartons. Shipments arriving
freight collect or without an RMA number shall be subject to refusal. CRESTRON
reserves the right in its sole and absolute discretion to charge a 15% restocking fee, plus
shipping costs, on any products returned with an RMA.

3. Return freight charges following repair of items under warranty shall be paid by
CRESTRON, shipping by standard ground carrier. In the event repairs are found to be
non-warranty, return freight costs shall be paid by the purchaser.

CRESTRON Limited Warranty

CRESTRON ELECTRONICS, Inc. warrants its products to be free from manufacturing defects in
materials and workmanship under normal use for a period of three (3) years from the date of
purchase from CRESTRON, with the following exceptions: disk drives and any other moving or
rotating mechanical parts, pan/tilt heads and power supplies are covered for a period of one (1)
year; touchscreen display and overlay components are covered for 90 days; batteries and
incandescent lamps are not covered.

This warranty extends to products purchased directly from CRESTRON or an authorized
CRESTRON dealer. Purchasers should inquire of the dealer regarding the nature and extent of the
dealer's warranty, if any.

CRESTRON shall not be liable to honor the terms of this warranty if the product has been used in
any application other than that for which it was intended, or if it has been subjected to misuse,
accidental damage, modification, or improper installation procedures. Furthermore, this warranty
does not cover any product that has had the serial number altered, defaced, or removed.

This warranty shall be the sole and exclusive remedy to the original purchaser. In no event shall
CRESTRON be liable for incidental or consequential damages of any kind (property or economic
damages inclusive) arising from the sale or use of this equipment. CRESTRON is not liable for
any claim made by a third party or made by the purchaser for a third party.

CRESTRON shall, at its option, repair or replace any product found defective, without charge for
parts or labor. Repaired or replaced equipment and parts supplied under this warranty shall be
covered only by the unexpired portion of the warranty.

Except as expressly set forth in this warranty, CRESTRON makes no other warranties, expressed
or implied, nor authorizes any other party to offer any warranty, including any implied warranties
of merchantability or fitness for a particular purpose. Any implied warranties that may be imposed
by law are limited to the terms of this limited warranty. This warranty statement supercedes all
previous warranties.

Trademark Information

All brand names, product names, and trademarks are the sole property of their respective owners. Windows is a registered
trademark of Microsoft Corporation. Windows95/98/Me/XP and WindowsNT/2000 are trademarks of Microsoft
Corporation.

Crestron Electronics, Inc. Operations Guide – DOC. 5892

15 Volvo Drive Power Pack: PW-2420RU
Rockleigh, NJ 07647 07.00
Tel: 888.CRESTRON Specifications subject to change without notice.
Fax: [phone] www.crestron.com