AV3/PRO3
3-Series® Control System
Getting Started
Scan the QR code to view the Quick Start Guide.
www.crestron.com/docs/7721
For additional information on the AV3, visit
www.crestron.com/model/6504878.
For additional information on the PRO3,visit
www.crestron.com/model/6504880.
Certification and Compliance
Regulatory Models: AV3, PRO3
Federal Commu nications Commission (FCC)
Compliance Statement
This device complies with part 15 of the FCC Rules.
Operation is subject to the following conditions:
(1) This device may not cause harmful interference
and (2) this device must accept any interference
received, including interference that may cause
undesired operation.
CAUTION:Changes or modifications not expressly
approved by the manu facturer responsible for
compliance could void the us er’s authority to
operate the equipment.
NOTE: This equipment has been tested and foun d
to comply with the limits for a Class B digital device,
purs uant to part 15 of the FCC Rules. These limits
are designed to provide reas onable protection
against harmful interference in a residential
installation. This equipment generates, uses and
can radiate radio frequency energy and, if not
installed and used in accordance with the
instructions, may cause harmfu l interference to
radio commu nications. However, there is no
guarantee that interference will no t occur in a
particular installation. If this equipment does cause
harmfu l interference to radio o r television
reception, wh ich can be determined by turning the
equipment off and on, the user is encouraged to try
to correct the interference by o ne or more of the
following measures:
l Reorient or relocate the receiving antenna.
l Increase the separation between the equipment
and receiver.
l Connect the equipment into an outlet on a
circuit different from that to which the receiver
is connected.
l Consult the dealer or an experienced radio/TV
technician for help.
Industry Canada (IC) Compliance Statement
CAN ICES-3(B)/NMB-3(B)
As of the date of manu facture, the pro duct has
been tested and found to comply with
specifications for CE marking.
This product is Listed to applicable UL® Standards
and requirements tested by Underwriters
Laboratories Inc.
Ce pro duit est ho mologu é selon les normes etles
exigences UL applicables par Underwriters
Laboratories Inc.
DocType - 8664A
(2055345)
01.20
Rack Mounting Safety Precautions
Elevated Operating A mbient Temperature: If
installed in a closed or multi-unit rack assembly, the
operating ambient temperature of the rack
environment may be greater than room ambient
temperature. Th erefore, consideration should be
given to installing the equipment in an environment
compatiblewith the maximum ambient
temperature (Tma) specified by the manufacturer.
Reduced Airflow: Installation o f the equipment in a
rack sho uld be such that the amount of airflow
required for safe o peration of the equipment is not
compromised.
Mechan ical Loading: Mounting of the equipment in
the rack shou ld be su ch that a hazardous condition
is n ot achieved due to uneven mechanical loading.
Circuit Overloading: Consideration should be given
to the connection of the equ ipment to the supply
circuit and the effect that overloading of the
circuits might have on overcurrent protection and
supply wiring. Appropriate consideration of
equipment nameplate ratings shou ld be us ed wh en
address ing this concern.
Reliable Earthing: Reliable earthing of
rack-mo unted equipment should be maintained.
Particular attention should be given to supply
connections other than direct connections to the
branch circuit (e.g., use of power strips).
Legal
The produ ct warranty can be found at
www.crestron.com/warranty.
The specific patents that co ver Crestron produ cts
are listed at www.crestron .com/legal/patents.
Certain Crestron products contain open so urce
software.For specific info rmation, visit
www.crestron.com/opensource.
Crestron, the Crestron logo, and 3-Series are either
trademarks or registered trademarks of Crestron
Electronics, I nc. in the United States and/or o ther
countries. UL and the UL logo are either
trademarks or registered trademarks of
Underwriters Laboratories, Inc. in the United States
and/ or other countries. Other trademarks,
registered trademarks, and trade n ames may be
used in this document to refer to either the entities
claiming the marks an d names or their pro ducts.
Crestron disclaims any proprietary interest in the
marks and names of o thers. Crestron is n ot
respon sible for errors in typo graph y o r
photography.
©2020 Crestron Electronics, Inc.
Crestron Electronics, Inc.
15 Volvo Drive, Rockleigh, NJ07647
Tel: 888.CRESTRON
Fax: 201.767.7656
www.crestron.com
Product Information - Doc. 8664A
(2055345)
01/30/20
Loading...