Crestron MP-B10-B-T User Manual

MP-B10

Media Presentation Button Panel B10

> Wall mount pushbutton control panel

> No programming required with select .AV Framework™

enabled switchers

> 10 programmable buttons with LED feedback

> Customizable backlit button labels

> Volume control knob and LED bargraph

> Built-in IR receiver and light sensor

> High-speed Ethernet or Cresnet® communications

> PoE or Cresnet network powered

> 3-gang wall box-mountable

The MP-B10 is an enhanced pushbutton control panel designed for
installation in a wall or podium. It can be used with any Crestron® control
system or presentation switcher, and it provides a perfect complement
to any Crestron MPC Media Presentation Controller. Available in white or
black, the MP-B10 is constructed to handle the rigors of everyday use in a
typical classroom, meeting room, lecture hall, or training facility.

Controls & Indicators

Its 10 “hard key” buttons can be custom programmed to control any
function, such as system power, input source selection, and lighting
presets. Audio volume and other parameters are adjustable using the
control knob and LED bargraph. Custom backlit labeling of each button
is facilitated using an assortment of pre-printed labels or Crestron
Engraver software.

A built-in IR receiver provides a gateway for RC-5 and Crestron compatible
IR wireless remotes. An ambient light sensor is also included, which may
be programmed to control the MP-B10’s backlight intensity and other
customer functions. The MP-B10 can be powered through the network
wiring using either Cresnet® or PoE (Power over Ethernet), requiring just
one wire for operation.

SPECIFICATIONS

Communications

Ethernet: 10/100 Mbps, auto-switching, auto-negotiating, auto-discovery,
full/half duplex, DHCP, IEEE 802.3af and 802.3at Type 1 compliant

Cresnet®: Cresnet slave mode
USB: USB 1.1 device port for computer console (firmware update)
IR: Built-in RC-5 compatible IR receiver

Hard Keys: (10) Programmable pushbuttons with backlit labeling
Feedback Indicators: (10) Programmable red LEDs (1 per hard key)
VOLUME: (1) Programmable continuous turn rotary encoder
Bargraph: (1) Programmable red 5-segment LED bargraph
HW-R: (1) Recessed miniature pushbutton for hardware reset
SETUP: (1) Recessed miniature pushbutton (behind front cover) for setting

up connection with the control system via Cresnet or Ethernet
LAN PoE (rear): (2) green LEDs, bottom LED indicates link status, top LED

indicates Ethernet activity

Light Sensor

Photosensor, programmable for auto-dimming of the backlight and
other functions

IR Receiver

Reception Frequency: 36 to 38 kHz IR
Formats: Crestron format, RC-5
Range: Up to 50 ft line of sight (typical), dependent upon angle,

obstructions, IR interference, and IR remote signal strength

Power Requirements

Connectors

NET: (2) sets of (4) captive screw terminals;
Cresnet slave port with parallel pass-through

LAN PoE: (1) 8-wire RJ45, female;
10Base-T/100Base-TX Ethernet port, Power over Ethernet compliant

Computer: (1) USB Type B, female (behind front cover);
USB 1.1 computer console port for firmware update

Ground: (1) flying lead, chassis ground wire

crestron.com | 800.237.2041

Cresnet Power Usage: 4 Watts (0.17 Amps @ 24 Volts DC)
Power over Ethernet: IEEE 802.3at Type 1 (802.3af compatible) Class 2

(6.49W) PoE Powered Device

Note: If both PoE and Cresnet power are connected, power will be drawn
from Cresnet.

Environmental

Temperature: 32° to 104°F (0° to 40°C)
Humidity: 10% to 90% RH (non-condensing)

MP-B10 Media Presentation Button Panel B10

Heat Dissipation: 14 BTU/hr

Enclosure

Faceplate: Plastic, black or white, with polycarbonate label overlay
Chassis: Plastic with metal mounting plate
Mounting: Mounts in a 3-gang electrical box or mud ring, 2 inch (51 mm)

or greater mounting depth recommended

Dimensions

Height: 4.50 in (115 mm)
Width: 6.70 in (171 mm)
Depth: 2.23 in (57 mm)

Weight

17 oz (475 g)

MODELS & ACCESSORIES

Available Models

MP-B10-B-T: Media Presentation Button Panel B10, Black
MP-B10-W: Media Presentation Button Panel B10, White

Notes:

This product may be purchased from an authorized Crestron dealer. To find a dealer, please
contact the Crestron sales representative for your area. A list of sales representatives is available
online at www.crestron.com/salesreps or by calling 800-237-2041.

The specific patents that cover Crestron products are listed online at: patents.crestron.com.

Crestron, the Crestron logo, .AV Framework, and Cresnet, are either trademarks or registered
trademarks of Crestron Electronics, Inc. in the United States and/or other countries. Other
trademarks, registered trademarks, and trade names may be used in this document to refer
to either the entities claiming the marks and names or their products. Crestron disclaims any
proprietary interest in the marks and names of others. Crestron is not responsible for errors in
typography or photography. Specifications are subject to change without notice.
©2015 Crestron Electronics, Inc.

Available Accessories

MP/MPC/IPAC FRONT LABEL: Custom Engravable Backlit Labels
TTK-MP/MPC/IPAC: Table Mount Kit
SMK-MP/MPC/IPAC: Swivel Mount Kit
PWE-4803RU: PoE Injector
CEN-SW-POE-5: 5-Port PoE Switch
CEN-SWPOE-16: 16-Port Managed PoE Switch
CRESNET-NP: Cresnet® Control Cable, Non-Plenum
CRESNET-P: Cresnet® Control Cable, Plenum-Rated
CRESNET-HP-NP: Cresnet® “High-Power” Control Cable, non-plenum

MP-B10-W — Shown in White

Crestron Electronics, Inc. 15 Volvo Drive | Rockleigh, NJ 07647

Tel: [phone] | Fax: [phone]

www.crestron.com

All brand names, product names and trademarks are the property of their respective owners.

Specifications subject to change without notice. Revised 06/22/15

©2015 Crestron Electronics, Inc.