Crestron MMK-17L User Manual

Crestron MMK-17L Mud Mount Kit Installation Guide
This document was prepared and written by the Technical Documentation department at:
Crestron Electronics, Inc.
Rockleigh, NJ 07647
1-888-CRESTRON
All brand names, product names and trademarks are the property of their respective owners.
©2005 Crestron Electronics, Inc.
Crestron MMK-17L Mud Mount Kit
Mud Mount Kit: MMK-17L

Description

When cutouts made in the drywall for touchpanel installation are too large, a Mud Mount Kit is the preferred mounting option for the Crestron Isys wall mounted touchpanels as well as the Isys i/O™ TPMC-17-QM-L and TPMC-17-CH-L series of wall mounted touchpanels. The Mud Mount Kit provides support for additional plastering that can be applied to hide large irregularities in the touchpanel cutout.
NOTE: For concrete and rock mounting material, allow for proper ventilation before mounting the touchpanel.
The MMK-17L is a pre-construction accessory. Pre-construction refers to framed walls prior to hanging drywall. This accessory must be used with either the Pre­Construction Mount Kit (PMK-17L) or Back Box Kit (BB-17L).
NOTE: If necessary, consult the latest revision of the TPS-12L/15L/17L Operations Guide (Doc. 6355) or the TPMC-15/17-L Series Operations Guide (Doc. 6354) for a complete list of mounting options.

Supplied Hardware

The MMK-17L consists of three parts. These parts produce an assembly that attaches to the PMK-17L or BB-17L.
Supplied Hardware of the MMK-17L
®
TPS-17L series of
DESCRIPTION PART NUMBER QUANTITY
Metal Plate, Mud Ring 2013464 1
Metal Plate, Fastener 2004825 2
Hardware, Push-On Fastener 2004121 4
Installation Guide – DOC. 6369 Mud Mount Kit: MMK-17L 1
Mud Mount Kit Crestron MMK-17L
Dimensional Drawings
5.90 in
(14.99 cm)
0.38 in
(0.95 cm)
FASTENER PLATE FOR MMK-17L
Drywall Cutout Dimensions
0.38 in
(0.95 cm)
17.60 in
(44.71 cm)
MUD RING PLATE FOR MMK-17L
14.34 in
(36.42 cm)
2.26 in
(5.73 cm)
~13
(338 mm Max)
DO NOT
EXCEED THIS
DIMENSION
13
~13
in
94
(335 mm Max)
5
in
16
5
~1
in
64
(29 mm Max)
TYP (4X)
1
~5
in
32
(127 mm Max)
3
~6
in
16
(157 mm Max)
1
~16
in
4
(412 mm Max)
3
Ø
in
16
(5 mm Max)
TYP (4X)
13 in
(330 mm Max)
5
~
in
32
(44 mm Max)
3
~
in
64
(11 mm Max)
2
Mud Mount Kit: MMK-17L Installation Guide – DOC. 6369
Crestron MMK-17L Mud Mount Kit

Installation

The procedure in this section provides the necessary steps for the assembly of the MMK-17L to either the PMK-17L or BB-17L. It is assumed that the PMK-17L or BB-17L has been secured to the studs according to the procedures in the latest revisions of their respective Installation Guides (Doc. 6368 and Doc. 6367, respectively). Also, it is assumed that drywall is in place and a rectangular cutout for the touchpanel is made in the drywall (refer to the drywall cutout dimensions on page 2).
Complete the steps in the order provided. The only tools or materials required and not supplied are a drywall saw or equivalent, four standard drywall screws, #2 Phillips screwdriver, a level, and tools/material to apply drywall joint compound.
CAUTION: A two-foot air gap above and below the enclosure is required when positioning the BB-17L and PMK-17L.
NOTE: The illustrations in this procedure show the installation of the MMK-17L with the PMK-17L. Even though the illustrations only show the PMK-17L, procedures are identical for the BB-17L as well.
1. Pass a fastener plate through the opening and align its two center holes with the top two pins on the PMK-17L. Verify that the pins on the fastener plate are not between the fastener plate and the PMK-17L. Refer to the illustration after this step for visual guidance.
Secure Fastener Plates to PMK-17L (or BB-17L)
PMK-17L
(4) PUSH-ON FASTENER
(2004121)
(2) FASTENER PLATE (2004825)
Installation Guide – DOC. 6369 Mud Mount Kit: MMK-17L
3
Mud Mount Kit Crestron MMK-17L
2. Slide a push-on fastener over each pin of the PMK-17L (or BB-17L) to loosely secure the fastener plate and the mounting plate. Do not push the push-on fasteners all the way down onto the pins. Slide them on enough to keep the fastener plate and mounting plate as one fastener/mounting plate assembly.
3. Use the second fastener plate and repeat steps 1 and 2 using the lower two PMK-17L (or BB-17L) pins.
NOTE: When installing into the PMK-17L, verify that the 18 AWG bus wire securing the cables for the touchpanel remain attached.
4. Verify that the drywall cutout meets the measurements specified on page 2.
5. Insert the symmetrical mud ring plate into the opening, as shown in the illustration after this step.
Insert and Secure Mud Ring Plate into PMK-17L (or BB-17L)
PMK-17L
DRYWALL
FLANGE
HOLES FOR DRYWALL SCREWS (PROVIDED BY OTHER) SCREW
LENGTH SHOULD NOT EXCEED DRYWALL THICKNESS BY MORE THAN 1/2".
6. When the mud ring plate is in position, bend the top two flanges of the plate upward and the bottom two flanges downward.
MUD RING PLATE
(2013464)
If mounting into the PMK-17L, bend the flanges approximately 90
degrees.
If mounting into the BB-17L, bend the flanges back as far as they
can go.
4
Mud Mount Kit: MMK-17L Installation Guide – DOC. 6369
Crestron MMK-17L Mud Mount Kit
7. Use four standard drywall screws (length should not exceed drywall thickness by more than ½ inch) to secure the mud ring plate to the rest of the assembly. The screws pass through the clearance holes in the PMK-17L (or BB-17L) and are secured in the extruded holes of the fastener plates.
8. Verify that the mud ring plate is level.
NOTE: Do not over tighten screws. Doing so may over-dimple or rip the mud ring plate.
9. Use a #2 Phillips screwdriver and tighten the drywall screws by hand so that they slightly dimple into the holes in the mud ring plate.
10. Apply drywall joint compound as needed to finish the cutout. Avoid covering the eight tapped mounting holes.
11. Run the necessary cables for the touchpanel and secure them behind the drywall.
12. When dry, the touchpanel can be installed using the eight tapped holes in the PMK-17L. Refer to the latest revision of the TPS-12L/15L/17L Operations Guide (Doc. 6355) or TPMC-15/17-L Series Operations Guide (Doc. 6354) for installation instructions.
Installation Guide – DOC. 6369 Mud Mount Kit: MMK-17L
5
Mud Mount Kit Crestron MMK-17L

Further Inquiries

If you cannot locate specific information or have questions after reviewing this guide, please take advantage of Crestron's award winning customer service team by calling the Crestron corporate headquarters at 1-888-CRESTRON [1-888-273-7876]. For assistance in your local time zone, refer to the Crestron website (www.crestron.com) for a listing of Crestron worldwide offices.
You can also log onto the online help section of the Crestron website to ask questions about Crestron products. First-time users will need to establish a user account to fully benefit from all available features.
As of the date of manufacture, the MMK-17L has been tested and found to comply with specifications for CE marking.

Future Updates

As Crestron adds improvements to the MMK-17L, additional information may be made available as manual updates. These updates are solely electronic and serve as intermediary supplements prior to the release of a complete technical documentation revision.
Check the Crestron website periodically for manual update availability and its relevance. Updates are identified as an “Addendum” in the Download column.
6
Mud Mount Kit: MMK-17L Installation Guide – DOC. 6369
Crestron MMK-17L Mud Mount Kit

Return and Warranty Policies

Merchandise Returns / Repair Service

1. No merchandise may be returned for credit, exchange, or service without prior authorization from CRESTRON. To obtain warranty service for CRESTRON products, contact the factory and request an RMA (Return Merchandise Authorization) number. Enclose a note specifying the nature of the problem, name and phone number of contact person, RMA number, and return address.
2. Products may be returned for credit, exchange, or service with a CRESTRON Return Merchandise Authorization (RMA) number. Authorized returns must be shipped freight prepaid to CRESTRON, 6 Volvo Drive, Rockleigh, N.J., or its authorized subsidiaries, with RMA number clearly marked on the outside of all cartons. Shipments arriving freight collect or without an RMA number shall be subject to refusal. CRESTRON reserves the right in its sole and absolute discretion to charge a 15% restocking fee, plus shipping costs, on any products returned with an RMA.
3. Return freight charges following repair of items under warranty shall be paid by CRESTRON, shipping by standard ground carrier. In the event repairs are found to be non-warranty, return freight costs shall be paid by the purchaser.

CRESTRON Limited Warranty

CRESTRON ELECTRONICS, Inc. warrants its products to be free from manufacturing defects in materials and workmanship under normal use for a period of three (3) years from the date of purchase from CRESTRON, with the following exceptions: disk drives and any other moving or rotating mechanical parts, pan/tilt heads and power supplies are covered for a period of one (1) year; touchscreen display and overlay components are covered for 90 days; batteries and incandescent lamps are not covered.
This warranty extends to products purchased directly from CRESTRON or an authorized CRESTRON dealer. Purchasers should inquire of the dealer regarding the nature and extent of the dealer's warranty, if any.
CRESTRON shall not be liable to honor the terms of this warranty if the product has been used in any application other than that for which it was intended, or if it has been subjected to misuse, accidental damage, modification, or improper installation procedures. Furthermore, this warranty does not cover any product that has had the serial number altered, defaced, or removed.
This warranty shall be the sole and exclusive remedy to the original purchaser. In no event shall CRESTRON be liable for incidental or consequential damages of any kind (property or economic damages inclusive) arising from the sale or use of this equipment. CRESTRON is not liable for any claim made by a third party or made by the purchaser for a third party.
CRESTRON shall, at its option, repair or replace any product found defective, without charge for parts or labor. Repaired or replaced equipment and parts supplied under this warranty shall be covered only by the unexpired portion of the warranty.
Except as expressly set forth in this warranty, CRESTRON makes no other warranties, expressed or implied, nor authorizes any other party to offer any warranty, including any implied warranties of merchantability or fitness for a particular purpose. Any implied warranties that may be imposed by law are limited to the terms of this limited warranty. This warranty statement supercedes all previous warranties.
Trademark Information
All brand names, product names, and trademarks are the sole property of their respective owners. Windows is a registered trademark of Microsoft Corporation. Windows95/98/Me/XP and WindowsNT/2000 are trademarks of Microsoft Corporation.
Installation Guide – DOC. 6369 Mud Mount Kit: MMK-17L
7
Mud Mount Kit Crestron MMK-17L
This page intentionally left blank.
8
Mud Mount Kit: MMK-17L Installation Guide – DOC. 6369
Crestron MMK-17L Mud Mount Kit
This page intentionally left blank.
Installation Guide – DOC. 6369 Mud Mount Kit: MMK-17L
9
Crestron Electronics, Inc. Installation Guide – DOC. 6369
15 Volvo Drive Rockleigh, NJ 07647 (2013438) Tel: 888.CRESTRON 08.05 Fax: 201.767.7576 Specifications subject to www.crestron.com change without notice.
Loading...