Crestron B-G1-WPK User Manual

Water Resistant Cover Kit for Single

)

Gang Wall Panel: B-G1-WPK

The Crestron water resistant cover kit is specifically designed for ‘CNX-B Series’ single gang
wall panels. There are four urethane covers per kit. When properly installed the cover
prevents liquids and other air-born materials from settling directly onto the panel, but does not
interfere with regular usage of the unit.

No tools are required to install the B-G1-WPK cover; a silicone rubber adhesive is provided.
The panel must be properly setup (i.e., connected to the network) as outlined in the latest
version of the Single Gang Keypads Operations & Installation Guide (Doc. 8173) prior to
installing the water resistant cover. Complete the steps listed adjacent to the diagram for
installation.

INSTALLED PANEL

MOUNTING

SURFACE

B-G1-WPK

COVER

WARNING: Silicone rubber adhesive is an irritant to skin, eyes, and respiratory tract. Skin and eye
protection required. Avoid repeated or prolonged contact. Good ventilation is required.

GAP LOCATION

1. Remove the backing
from the tape that
surrounds the perimeter
of the cover.

2. Place the cover over the
panel making sure that
the gap in the tape
perimeter is located at
the bottom.

3. Firmly press down the
cover so that it
completely encloses the
panel.

4. Except for the gap at the
bottom, apply a bead of
silicone rubber adhesive
around the outer edge of
the cover (form a seal
with the mounting
surface

5. Do not use the panel
while the adhesive cures
(typically 24 hours).

.

WARNING: To avoid shock hazard and possible damage to the unit, never install a touchpanel where it
may be exposed to rain or very high humidity. This kit is designed to resist water (eg. protect unit from
wet hands) and in no way provides waterproof protection.

Further Inquiries

If after reviewing this sheet for the B-G1-WPK, you still have questions, please take
advantage of Crestron's award winning customer service team by calling:

• In the US and Canada, call Crestron’s corporate headquarters at 1-888-CRESTRON
[1-888-273-7876].

• In Europe, call Crestron International at [phone].

• In Asia, call Crestron Asia at [phone].

• In Latin America, call Crestron Latin America at [phone].

Crestron Electronics, Inc. Water Resistant Cover Kit for Single Gang Wall Panel: B-G1-WPK

15 Volvo Drive DOC. 6100
Rockleigh, NJ 07647 01.03
Tel: 888.CRESTRON Specifications subject to change without notice.
Fax: [phone] www.crestron.com

• In Australia and New Zealand, call Crestron Pacific at [phone].

Return and Warranty Policies

Merchandise Returns / Repair Service

1. No merchandise may be returned for credit, exchange, or service without prior
authorization from CRESTRON. To obtain warranty service for CRESTRON
products, contact the factory and request an RMA (Return Merchandise
Authorization) number. Enclose a note specifying the nature of the problem, name
and phone number of contact person, RMA number, and return address.

2. Products may be returned for credit, exchange, or service with a CRESTRON Return
Merchandise Authorization (RMA) number. Authorized returns must be shipped
freight prepaid to CRESTRON, Cresskill, N.J., or its authorized subsidiaries, with
RMA number clearly marked on the outside of all cartons. Shipments arriving freight
collect or without an RMA number shall be subject to refusal. CRESTRON reserves
the right in its sole and absolute discretion to charge a 15% restocking fee, plus
shipping costs, on any products returned with an RMA.

3. Return freight charges following repair of items under warranty shall be paid by
CRESTRON, shipping by standard ground carrier. In the event repairs are found to
be non-warranty, return freight costs shall be paid by the purchaser.

CRESTRON Limited Warranty

CRESTRON ELECTRONICS, Inc. warrants its products to be free from manufacturing
defects in materials and workmanship under normal use for a period of three (3) years
from the date of purchase from CRESTRON, with the following exceptions: disk drives
and any other moving or rotating mechanical parts, pan/tilt heads and power supplies are
covered for a period of one (1) year; touchscreen display and overlay components are
covered for 90 days; batteries and incandescent lamps are not covered.

This warranty extends to products purchased directly from CRESTRON or an authorized
CRESTRON dealer. Purchasers should inquire of the dealer regarding the nature and
extent of the dealer's warranty, if any.

CRESTRON shall not be liable to honor the terms of this warranty if the product has
been used in any application other than that for which it was intended, or if it has been
subjected to misuse, accidental damage, modification, or improper installation
procedures. Furthermore, this warranty does not cover any product that has had the serial
number altered, defaced, or removed.

This warranty shall be the sole and exclusive remedy to the original purchaser. In no
event shall CRESTRON be liable for incidental or consequential damages of any kind
(property or economic damages inclusive) arising from the sale or use of this equipment.
CRESTRON is not liable for any claim made by a third party or made by the purchaser
for a third party.

CRESTRON shall, at its option, repair or replace any product found defective, without
charge for parts or labor. Repaired or replaced equipment and parts supplied under this
warranty shall be covered only by the unexpired portion of the warranty.

Except as expressly set forth in this warranty, CRESTRON makes no other warranties,
expressed or implied, nor authorizes any other party to offer any warranty, including any
implied warranties of merchantability or fitness for a particular purpose. Any implied
warranties that may be imposed by law are limited to the terms of this limited warranty.
This warranty statement supercedes all previous warranties.

Trademark Information

All brand names, product names, and trademarks are the sole property of their respective owners. Windows is a
registered trademark of Microsoft Corporation. Windows95/98/Me/XP and WindowsNT/2000 are trademarks of
Microsoft Corporation.