Creda SFH24AW, SFH18AW User Manual

Model Reference Rating Direct Charge Net Storage Weight Number Number of Remaining Useful Heat* (Fan Off)

Storage Acting Acceptance (7 hrs) of Elements Core Bricks After 17hrs (Static) Discharge

SFH18AW 70305 2.5kW 1.5kW 17.6kWh 14.9kWh 121kg 3 12 40%
SFH24AW 70315 3.4kW 1.5kW 23.5kWh 20kWh 158kg 4 16 40%

SFHA Sensair Automatic

Electric storage fan heaters

22

[phone] www.creda-heating.co.uk

Product Selector

Technical Specification

Dimensions

Key features

• Combines electric storage fan heating,
direct acting heating and fanned heat output
with simple controls

• Fully automatic heat storage - no user adjustment
required on input controls

• High performance insulation works more
effectively than a conventional storage heater

• Heat output is via a quiet two speed fan

• Boost setting for high speed room heat up

• Fan can be switched off without altering
thermostat setting

• Operates on virtually any tariff and takes better
advantage of extended or split tariffs

• Fanned heating avoids heat stratification

• Lockable controls cover

• Negative pressure air movement through the
storage core avoids hotspots and heat leakage

• Elements (storage) - mineral insulated stainless
steel sheathed

• Insulation - opacified silicaceous aerogel and
mineral fibre mat

• Storage Core - high density iron oxide compound

• Fan Unit - two speed crossflow fan

• Controls (Output) - regulated by fan, activated
by integral adjustable thermostat

• Controls (Input) - hydraulic head temperature
compensated, room and storage core temperature
sensitive, auto-set charge control

• Protection - two level thermal safety overheat

• Supply - 230/240V AC single phase

“

The ultimate combination
of storage and direct
fan heating. Able to
regulate input with direct
acting heat flexibility, the
SFHA Sensair is more
effective at retaining heat
than a conventional
storage heater.

Able to operate on virtually any tariff
and with superior high performance
insulation levels, it achieves higher SAP
and NHER ratings than manual input
storage heaters.

”

Model Height A Width B Depth C

SFH18AW 705mm 788mm 187mm

SFH24AW 705mm 1016mm 187mm

Electric storage
heating

23

[phone] www.creda-heating.co.uk

Model Reference Rating Direct Charge Net Storage Weight Number Number of

Storage Acting Acceptance (7hrs) of Elements Core Bricks

TSR12CW 79348 1.7kW 1/0.5kW 11.8kWh 12.6kWh 78kg 2 8

TSR18CW 79358 2.5kW 1.5/0.75kW 17.6kWh 18.5kWh 114kg 3 12

TSR24CW 79368 3.4kW 2/1kW 23.5kWh 25.0kWh 149kg 4 16

TSR12ACW 75 772001 1.7kW 1/0.5kW 11.8kWh 12.6kWh 78kg 2 8

TSR18ACW 75 772002 2.5kW 1.5/0.75kW 17.6kWh 18.5kWh 114kg 3 12

TSR24ACW 75 772003 3.4kW 2/1kW 23.5kWh 25.0kWh 149kg 4 16

TSR Supaslim Combi

Storage fan heaters

Effectively two heaters in one, the built-in
fan can provide heat on its own or in
combination with the storage heater for a
rapid boost to room temperature.

Key features

• Combines economic tariff rate storage heater
with a fast and responsive Warmflow fan heater
for instant room heating

• The slimmest storage combination heater available

• Sensamatic fully automatic storage heater output
ensures room comfort levels are maintained
throughout the day without user intervention

• The Warmflow fan heater has manually
adjustable room temperature sensing thermostatic
control accurate to within 0.5°C

• Warmflow gives better heat distribution, helping
to avoid heat stratification

• Quiet, low velocity Warmflow fan

• All controls are concealed behind a lockable flap

• CW range manually adjustable hydraulic
charge control thermostat

• ACW range has hydraulic input charge
control thermostat providing auto-set
input charge control

• Fan heater ratings can be set on full or
half load (installation option)

• Automatic fan heater switch-off during off-peak
tariff periods (installation override option)

• Elements (storage) - mineral insulated stainless
steel sheathed

• Insulation - opacified silicaceous aerogel and
mineral fibre mat

• Storage Core - high density iron oxide compound

• Fan Unit - crossflow

• Controls - hydraulic head temperature
compensated, room and storage core temperature
sensitive, auto-set charge control

• Protection - two level thermal safety overheat

• Supply - 230/240V AC single phase

Technical Specification

Dimensions

Product Selector

Model Height A Width B Depth C

TSR12CW/ACW 760mm 560mm 170mm

TSR18CW/ACW 760mm 788mm 170mm

TSR24CW/ACW 760mm 1016mm 170mm

“

The Creda Supaslim
Combi heater is designed
to combine economic and
has efficient storage
heating using low-cost
tariff electricity with an
independently thermostat­controlled fan heater.

”

Electric storage
heating