SFHA Sensair Automatic |
Electric storage |
Electric storage fan heaters |
heating |
“The ultimate combination of storage and direct fan heating. Able to regulate input with direct acting heat flexibility, the SFHA Sensair is more effective at retaining heat than a conventional storage heater. ”
Able to operate on virtually any tariff and with superior high performance insulation levels, it achieves higher SAP and NHER ratings than manual input storage heaters.
Key features
•Combines electric storage fan heating, direct acting heating and fanned heat output with simple controls
•Fully automatic heat storage - no user adjustment required on input controls
•High performance insulation works more effectively than a conventional storage heater
•Heat output is via a quiet two speed fan
•Boost setting for high speed room heat up
•Fan can be switched off without altering thermostat setting
•Operates on virtually any tariff and takes better advantage of extended or split tariffs
•Fanned heating avoids heat stratification
•Lockable controls cover
•Negative pressure air movement through the storage core avoids hotspots and heat leakage
Technical Specification
•Elements (storage) - mineral insulated stainless steel sheathed
•Insulation - opacified silicaceous aerogel and mineral fibre mat
•Storage Core - high density iron oxide compound
•Fan Unit - two speed crossflow fan
•Controls (Output) - regulated by fan, activated by integral adjustable thermostat
•Controls (Input) - hydraulic head temperature compensated, room and storage core temperature sensitive, auto-set charge control
•Protection - two level thermal safety overheat
•Supply - 230/240V AC single phase
Dimensions
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Model |
|
|
|
Height A |
|
|
|
|
Width B |
|
|
Depth C |
||||||||||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
SFH18AW |
|
|
|
|
705mm |
|
|
|
|
|
788mm |
|
|
|
187mm |
|||||||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
SFH24AW |
|
|
|
|
705mm |
|
|
|
|
1016mm |
|
|
|
187mm |
||||||||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Product Selector
Model |
Reference |
Rating |
Direct |
Charge |
Net Storage |
Weight |
Number |
Number of |
Remaining Useful Heat* (Fan Off) |
|
|
Storage |
Acting |
Acceptance (7 hrs) |
|
|
of Elements |
Core Bricks |
After 17hrs (Static) Discharge |
SFH18AW |
70305 |
2.5kW |
1.5kW |
17.6kWh |
14.9kWh |
121kg |
3 |
12 |
40% |
SFH24AW |
70315 |
3.4kW |
1.5kW |
23.5kWh |
20kWh |
158kg |
4 |
16 |
40% |
22 |
+44 (0) 1733 456789 |
www.creda-heating.co.uk |
TSR Supaslim Combi |
Electric storage |
Storage fan heaters |
heating |
“The Creda Supaslim Combi heater is designed to combine economic and has efficient storage heating using low-cost tariff electricity with an
independently thermostatcontrolled fan heater. ”
Effectively two heaters in one, the built-in fan can provide heat on its own or in combination with the storage heater for a rapid boost to room temperature.
Key features
•Combines economic tariff rate storage heater with a fast and responsive Warmflow fan heater for instant room heating
•The slimmest storage combination heater available
•Sensamatic fully automatic storage heater output ensures room comfort levels are maintained throughout the day without user intervention
•The Warmflow fan heater has manually adjustable room temperature sensing thermostatic control accurate to within 0.5°C
•Quiet, low velocity Warmflow fan
•All controls are concealed behind a lockable flap
•CW range manually adjustable hydraulic charge control thermostat
•ACW range has hydraulic input charge control thermostat providing auto-set input charge control
•Fan heater ratings can be set on full or half load (installation option)
•Automatic fan heater switch-off during off-peak tariff periods (installation override option)
Technical Specification
•Elements (storage) - mineral insulated stainless steel sheathed
•Insulation - opacified silicaceous aerogel and mineral fibre mat
•Storage Core - high density iron oxide compound
•Fan Unit - crossflow
•Controls - hydraulic head temperature compensated, room and storage core temperature sensitive, auto-set charge control
•Protection - two level thermal safety overheat
•Supply - 230/240V AC single phase
Dimensions
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Model |
|
Height A |
Width B Depth C |
•Warmflow gives better heat distribution, helping to avoid heat stratification
Product Selector
TSR12CW/ACW 760mm 560mm 170mm
TSR18CW/ACW 760mm 788mm 170mm
TSR24CW/ACW 760mm 1016mm 170mm
Model |
Reference |
Rating |
Direct |
Charge |
Net Storage |
Weight |
Number |
Number of |
|
|
Storage |
Acting |
Acceptance (7hrs) |
|
|
of Elements |
Core Bricks |
TSR12CW |
79348 |
1.7kW |
1/0.5kW |
11.8kWh |
12.6kWh |
78kg |
2 |
8 |
TSR18CW |
79358 |
2.5kW |
1.5/0.75kW |
17.6kWh |
18.5kWh |
114kg |
3 |
12 |
TSR24CW |
79368 |
3.4kW |
2/1kW |
23.5kWh |
25.0kWh |
149kg |
4 |
16 |
TSR12ACW |
75 772001 |
1.7kW |
1/0.5kW |
11.8kWh |
12.6kWh |
78kg |
2 |
8 |
TSR18ACW |
75 772002 |
2.5kW |
1.5/0.75kW |
17.6kWh |
18.5kWh |
114kg |
3 |
12 |
TSR24ACW |
75 772003 |
3.4kW |
2/1kW |
23.5kWh |
25.0kWh |
149kg |
4 |
16 |
+44 (0) 1733 456789 |
www.creda-heating.co.uk |
23 |