Creative MF8190 User Manual

A USER GUIDE TO

Discover the many features of the Sound Blaster Roar 2!

Discover more ways

to experience your

Model No.: MF8190

http://soundblaster.com/roar-guides

Sound Blaster Roar!

Technical Speciﬁcation

Bluetooth

Version:

Bluetooth

Operating Frequency: 2402 - 2480 MHz Lithium Ion Battery: 6000mAh USB Input: 5V 500 - 1000mA DC Output: 5V 1000mA Power consumption during standby/off: < 0.5 W Power consumption during networked standby for each network port ( Power consumption during networked standby when all network ports are activated: < 2.0 W

When the device is powered on and connected to mains with no audio playback and not performing other main functions,

- it enters into networked standby mode within 20 minutes

- it consumes <0.5 W after all network ports are deactivated/disconnected in 28 hours

How to activate and deactivate wireless ports / connections

- To activate, perform pairing (See Page 6)

- To deactivate, perform clear device list* on the speaker and press the multifunction button

* 1 Ensure your speaker is not connected to any

2 With your speaker powered on, Press and hold the Multifunction button until the white LED blinks rapidly. Press and hold the Multifunction button and Volume “-“ button until a voice prompt is heard indicating the speaker has been master reset and returned to pairing mode.

Power Adapter Information

Model Number: FJ-SW1501600N or GPE024W-150160-Z Input: 100-240VAC 50/60Hz Output: 15VDC 1.6A

Operating Temperature range: 0ºC to 45ºC Supported Bluetooth proﬁles*:

A2DP (Wireless Stereo HFP (Handsfree proﬁle)

Supported Codec: SBC, aptX, AAC Operating Range: Up to 10 meters, measured in open space.

Walls and structures may affect range of device. Supports microSD cards of Class 4 and above, up to 32GB in FAT16/32 format Supported audio formats: MP3, WMA and WAV (16 bit 48Khz PCM) Support Mp3 and WMA up to 320kbps. Does not support WMA Pro / Lossless. Records audio, voice or mobile calls at 16k, ADPCM WAV format. Note: Compliance markings are located on the bottom of this product. * Refer to your documentation/website for supported proﬁles. ¹ Compatible with PC (Windows XP/Vista/7/8/8.1), Apple Macintoshes equipped with

Bluetooth

² Compatible with most major brands of

Compatibility Disclaimer

Wireless performance is dependent on your device’s device manufacturer’s manual. Creative will not be liable for any lost of data or leakages resulting from the use of these devices.

Product Registration

Registering your product ensures you receive the most appropriate service and product support available. You can register your product during installation or at http://www.creative.com/register. Please note that your warranty rights are not dependent on registration.

Safe Removal of Built-in Battery

Detailed instructions on removal of integrated battery can be found at creative.com/support/ ROAR2, these instructions are meant strictly for independently qualiﬁed professionals.

Bluetooth

wireless stereo.

3.0

Bluetooth

device.

Bluetooth

), AVRCP (

Bluetooth

Remote Control),

device (notebook¹, PC¹, or mobile device²) manufacturer’s

Bluetooth

A2DP enabled mobile phones.

Bluetooth

wireless technology. Refer to your

, USB): < 2.0 W

1 2

Overview

Top Rear

1. Power ON / Standby Button

2. Volume Up / Down Button

3. Multifunction Button

- For

- Answering calls

4. Power /

Bluetooth

pairing / connecting

Status Indicator

5. Microphone

6. Record Indicator

7. Battery Indicator

8. NFC Receptor

9. DC Input

10. Aux-In

11. DC Out (USB 1.0A)

How do I disable Voice Prompt?

●

With the speaker powered ON, press both Volume “–“ and Multifunction Button at the

same time. A prompt is heard indicating voice prompt is disabled.

How do I enable Voice Prompt?

●

On a speaker with disabled voice prompt, ensure that it is powered ON. Press both

Volume “+“ and Multifunction Button at the same time. A prompt is heard indicating voice prompt is enabled.

12. Micro USB Connector

13. MicroSD Slot

14. Mic On / Mute Switch

15. Record Button

16. (Record) Play / Pause Button

17. Random / Repeat All Switch

18. Previous Button

19. Next Button

20. (MP3 Playback) Play / Pause Button

21. / TeraBass indicator

22. / TeraBass button

23. USB Audio / Mass Storage mode switch

Charging your speaker - Power Adapter

Option 1 : Power Adapter

Charge the speaker with the supplied power adapter for at least

3 Hours

Adapter Model No.: FJ-SW1501600N

Assembling the Power Adapter

Adapter Model No.: GPE024W-150160-Z

Assembling the Power Adapter Removing Adapter Plug Head

US, Japan & Taiwan

3 hours before use. Please ensure your speaker is powered off for optimised charging.* * Battery performance may degrade over time depending on

charge cycles.

Removing the Power Adapter

The dual-purpose battery powers your Sound Blaster Roar and also charges your smartphone!

Here’s how you do it!

Simply connect a USB cable to the Sound Blaster Roar’s USB DC Out and the other end to your smartphone.

Europe

- Supplied interchangeable plugs may vary to region and country

Optimize your charging

●

The speaker will charge your smartphones even when the speaker is off.

●

When turned on, some smartphones require a higher charging rate than

battery banks can typically provide. For the quickest charging time, turn off your smartphone before charging it.

3 4

Charging your speaker - USB Power

Option 2 : USB

The Sound Blaster ROAR can also be charged using a USB cable. It may take longer to charge due to USB power limitation.

Switch off your speaker when charging.

Mains

* Not included, USB

adapter with DC 5V and up to 1A output rating can be used.

PC/Mac

TIP:

Lithium-ion battery life may suffer when it is constantly fully depleted or overexerted at low voltage. It is a good practice to keep the battery well charged.

For optimized charging: Creative recommends using the bundled USB cable for optimized charging.

+ 11 hidden pages