Creative T3250, MF0450 Quick Start Manual

Product overview

Enjoy audio from Bluetooth devices

b. Establish Bluetooth Connection

Press and hold the Bluetooth button
and release when the LED starts
blinking rapidly.

Power on the speaker by turning the
volume dial in the clockwise direction.
The LED status indicator will lit steady
indicating the speaker is currently ON.

Speaker Status

Pairing Mode

LED Status

LED rapid blinking

Powered ON (Idle) or
connected to any

Bluetooth

®

devices

Lit steady

a.

Powering Up the speaker

c. On Bluetooth device

. Turn ON the Bluetooth feature on your dev ce.

. Search for Creat ve T3250W.

. Pa r and connect to Creatve T3250W. If prompted for passcode, enter 0000.

v. Par ng successfu , ready to stream musc.

Note: The above are generic steps to pair

to a Bluetooth device, for more
specific instructions on Bluetooth
connectivity for your device, please
consult your manufacturer’s
manual.

d. Ready to stream music via Bluetooth

®

Turn volume dial clockwise or
anti-clockwise to increase or decrease
volume. You may also adjust your
source device volume settings to
increase or decrease volume.

Bluetooth

Network
Connections
Operator
Internet
USB

ON

ConnectvityConnectivity

Search results

Creative T3250W

Creative T3250W

PASSCODE

0000

CONNECTED

ii.i. ii. iv.

Creatve T3250W

6

7

5

4

1

3

2

1

1

Pairing

1 LED status indicator

2 ON / OFF Switch / Volume
3 Bluetooth Connect button
4 To Wall Outlet
5 3 5mm analog stereo mini plug
6 Left speaker
7 Right speaker

Creative T3250 Wireless

Quick Start Guide

ative T3250 Wireles

ck Start Guide

You can reconnect your paired Bluetooth device to your speaker easily.
Select ‘Creative T3250W’ entry on the Bluetooth device to reconnect any of the 4 previously
connected Bluetooth devices would be able to reconnect to Creative T3250W when the
T3250 Wireless is powered ON and not connected to any device.

The speaker enters power saving mode when there is no Bluetooth connection
or no audio signal detected on the Line-In connection for more than 15 minutes.
It is recommended to power off when the speaker is expected to be unused for
several days.

Note:

he Creative 3250 Wireless is able to remember up to 4 paired devices in its memory bank, eliminating
the need to re-pair again should any o these devices connect to the Creative 3250W Should a 5th
device be paired to the 3250W, the 1st device will be erased rom the 3250W s memory banks At any
one time a maximum memory o 4 devices are being retained

Reconnections between
Bluetooth device and
Creative T3250W

2

2

Power Saving Mode

3

3

Model No.: MF0450