Creative Jukebox Zen Xtra Quick Start Guide

En_JB Zen Xtra.fm Page 1 Wednesday, September 17, 2003 3:27 PM

Quick Start English

Overview (see picture on outer leaf)

1. Power button

2. Back button

3. Volume button

4. Reset button

5. Open switch
To insert or change the battery, push
this switch to the right. The cover pops
open.

6. Forward/Reverse button

7. Play/Pause button

Setup

Step 1: Inserting the battery

1. Push the Open switch to the
right. The cover pops open.

2. Insert the battery into your player.

3. Position the hooks of cover over the openings
as shown in Figure 1.

4. Press the cover gently to snap it shut.

8. Scroller
Use this to navigate screens and lists.
Scroll through screen items or options,
and then press to select.

9. Menu button

10. Headphones connector

11. Power adapter connector

12. USB connector

13. LCD screen

Hook

Opening

Figure 1: Inserting the battery

1

En_JB Zen Xtra.fm Page 2 Wednesday, September 17, 2003 3:27 PM

Step 2: Charging your player

Before using the battery for the first time, make sure it is fully charged. This should take about
4 hours. Subsequent recharging should take 1–3 hours typically.

1. Connect your player to the wall outlet as
shown in Figure 2.
Yo u r p l a y e r t ur ns on .

2. Check the battery icon to see when the
battery is fully charged.

Power s ocket

Step 3: Turning on the player

Press and hold the Powe r button for a few
seconds until the player turns on.

Te s t i n g t h e p l ay er

To hear a preloaded music track in the Selected
Music List:

1. Connect your headphones to the player.

2. Press the Play button.

Figure 2: Connecting your player to

the wall outlet

Step 4: Installing the software

DO NOT connect your player to your computer before installing the drivers. The following

instructions are applicable to all supported Windows operating systems.

1. Insert the Installation CD into your CD-ROM drive.

2. The Installation CD supports Windows AutoPlay mode and starts running automatically. If
not, you need to enable your CD-ROM drive's auto-insert notification feature.

3. Click the Install software for NOMAD Zen Xtra option to select it.

4. Click the OK button.

5. When prompted to restart your computer, leave the CD in the CD-ROM drive, and then
click the Yes, I want to restart my computer now option to select it.

6. Click the Finish button to complete the installation. After the system restarts, you will be
prompted to register with Creative, so that you will be updated on new developments for
your player. Follow the onscreen instructions to register.

2