User’s Guide
Creative Desktop Wireless 6000
Information in this document is subject to change without notice and does not represent a commitment on the part of Creative Technology Ltd. No
part of this manual may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording,
for any purpose without the written permission of Creative Technology Ltd. The software described in this document is furnished under a license
agreement and may be used or copied only in accordance with the terms of the license agreement. It is against the law to copy the software on any
other medium except as specifically allowed in the license agreement. The licensee may make one copy of the software for backup purposes.
The Software License Agreement is found in a separate folder on the installation CD
Copyright © 2003 by Creative Technology Ltd. All rights reserved.
Version 1.0
July 2003
The Creative logo is a registered trademark of Creative Technology Ltd. in United States and other countries.
Microsoft, MS-DOS, and Windows are registered trademarks of Microsoft Corporation. All rights reserved. All other logos, brand or product names
are trademarks or registered trademarks of their respective holders and are hereby recognised as such. All specifications are subject to change. Actual
contents may differ slightly from those pictured.
Contents
Contents
Introduction
Package Contents................................................................................................................. i
System Requirements ......................................................................................................... i
Document Conventions...................................................................................................... ii
1 About Creative Wireless Keyboard and Optical Mouse
Creative Wireless Keyboard ................................................................................................... 1-1
Creative Wireless Optical Mouse ........................................................................................... 1-3
Creative RF Receiver............................................................................................................... 1-4
2 Installing Hardware
Step 1: Insert batteries into Creative Wireless Optical Mouse .............................................. 2-1
Step 2: Insert batteries into Creative Wireless Keyboard....................................................... 2-2
Step 3: Connect the Creative RF Receiver ............................................................................ 2-3
Step 4: Activate the wireless desktop devices ....................................................................... 2-4
Step 5: Test the keyboard and mouse...................................................................................... 2-4
3 Installing Software
Installing Software .................................................................................................................. 3-1
4 Using Creative Mouse And Keyboard Software
Using Creative Mouse Software ............................................................................................. 4-1
Configuring the mouse buttons ...................................................................................... 4-1
Configuring the mouse wheel ........................................................................................ 4-2
Configuring the pointer ................................................................................................... 4-2
Using Creative Keyboard Software ........................................................................................ 4-2
Tips On Using Your Keyboard and Mouse............................................................................ 4-3
A Technical Specifications
Creative Wireless Optical Mouse........................................................................................... A-1
Creative Wireless Keyboard................................................................................................... A-2
Creative RF Receiver.............................................................................................................. A-3
B Troubleshooting
Problems Installing Software.................................................................................................. B-1
Problems With Your Creative Wireless Keyboard or Optical Mouse ................................. B-2
Introduction
Introduction
Creative Desktop Wireless 6000 is a stylish wireless keyboard and mouse combination at a great price.
Convenient wireless technology gives you responsive keyboard and mouse performance within 1.8
meters (6 feet) of your computer without cluttering your desktop with cables. The 19 one-touch keys
offer faster access to popular Internet, multimedia, and email functions. Your Creative Wireless Optical
Mouse provides precise 800 dpi optical performance on virtually any surface with no moving parts to
clean. Intelligent power saving features extend the battery life of your keyboard and mouse, and still
provide immediate response with a simple keystroke or mouse movement.
Installation is effortless with a simple USB receiver that will swiftly connect your keyboard and mouse.
Package Contents The following items are included in your package:
❑ Creative Wireless Keyboard (with foldable palm rest)
❑ Creative Wireless Optical Mouse
❑ Creative RF Receiver (USB interface)
❑ 4 x AA batteries
❑ Installation CD
❑ Quick Start leaflet
System
Requirements
For Microsoft Windows 98
or 98 SE users, the
Windows installation CD
will be needed to install
Desktop Wireless 6000
successfully.
❑ Genuine Intel® Pentium® or AMD® Athlon™ 266 MHz processor or higher
❑ Windows
or Windows XP
❑ 32 MB RAM
❑ 16 MB available hard disk space
❑ DVD-ROM/CD-ROM drive for software installation
❑ Available USB port or powered USB hub
❑ For multimedia playback, sound card and speakers are required
®
98, Windows 98 Second Edition (SE), Windows Millennium Edition (Me), Windows 2000
Introduction i
Document
Conventions
The following typographical conventions are used throughout this document.
Tip. This tells you about short cuts or hints relating to a feature.
Note. This highlights additional or important information about a feature.
Caution! This highlights proper usage of your product. Use this information
to avoid risky situations.
Warning! This warns you of possible hazards to yourself or your product,
that may result in injury or damage.
Introduction ii
1
About Creative Wireless Keyboard and
Optical Mouse
About Creative Wireless Keyboard and Optical Mouse
Creative Wireless Keyboard
The appearance of your
keyboard may differ
depending on model and
region of purchase.
The keyboard and its one-touch keys are shown in Figure 1-1 below:
One-touch keys
Front view
Connect
button
Foldable
palm rest
Rear view
Figure 1-1
About Creative Wireless Keyboard and Optical Mouse 1-1
Key Function Key Function
My
Favorite
Launches either Internet
Explorer’s Favorites
folder, or Netscape
Navigator’s Bookmarks
folder
Search Opens a Search box in the
current Web browser
Back Goes to the previous page
in your Web browser
Forward Goes to the next page in
your Web browser
Refresh Reloads the current Web
page
Stop
Stops loading a Web page My
Loading
World
Wide Web
Launches the default Web
browser
Stop Stops playing the CD/
VCD/DVD
Play/Pause Plays or pauses a CD/
VCD/DVD
Volume
Decreases the volume level
Down
Volume Up Increases the volume level
Media
Player
Opens the default media
player
Mute Turns audio output
off/on
Opens My Computer
Computer
Calculator Opens the default
calculator application
E-mail Launches the default
e-mail application
Previous
Track
Next
Track
Goes to the previous track
in a CD/VCD/DVD
Goes to the next track in a
CD/VCD/DVD
Suspend Enables the power saving
mode
About Creative Wireless Keyboard and Optical Mouse 1-2
Creative Wireless Optical Mouse
The appearance of your
mouse may differ
depending on model and
region of purchase.
The mouse and its controls are shown in Figure 1-2 below:
Right-click button Scroll wheel
Left-click button
Front view
Connect button
Rear view
Figure 1-2
About Creative Wireless Keyboard and Optical Mouse 1-3
Creative RF Receiver
The RF receiver, with USB connector and LED indicators, are shown in Figure 1-3 below:
Caps Lock LED indicator
Num Lock LED indicator
Communication LED indicator
Connect button
Figure 1-3
USB connector
Scroll Lock LED indicator
About Creative Wireless Keyboard and Optical Mouse 1-4
2
Installing Hardware
Installing Hardware
Step 1: Insert batteries into Creative Wireless Optical Mouse
1. Turn the mouse over and open the battery compartment cover,
as shown in Figure 2-1.
Figure 2-1: Opening the battery
compartment
2. Insert two AA batteries according to the directions in the
battery compartment, as shown in Figure 2-2.
3. Close the battery compartment cover and push the catch
downwards to lock it.
Figure 2-2: Inserting batteries
Installing Hardware 2-1
Step 2: Insert batteries into Creative Wireless Keyboard
1. Turn the keyboard over.
2. Slide the battery compartment cover downwards as
shown in Figure 2-3.
Figure 2-3: Opening the battery
compartment
3. Insert two AA batteries according to the directions in
the battery compartment, as shown in Figure 2-4.
4. Slide the battery compartment cover upwards to close it.
Figure 2-4: Inserting batteries
Installing Hardware 2-2
Step 3: Connect the Creative RF Receiver
Make sure that you have
inserted batteries into the
mouse and keyboard
before Step 3.
1. Turn on your computer.
2. Connect the USB connector on the RF receiver to the USB port on your computer as shown in
Figure 2-5.
Figure 2-5: Connecting the RF receiver to the computer
3. Place the RF receiver at least 8 inches (20 cm) from your computer or monitor.
Installing Hardware 2-3
Step 4: Activate the wireless desktop devices
1. Press the Connect button on the RF receiver, as shown in Figure 2-6.
2. Press the Connect button on the mouse. The Communication LED indicator on the RF receiver
blinks green for about 5 sec.
3. Press the Connect button on the keyboard. The Communication LED indicator on the RF receiver
blinks green for about 5 sec.
• Make sure that the
keyboard and mouse
are within 1.8 meters
(6 feet) of the RF
Receiver.
• Press the Connect
buttons on each of your
Desktop Wireless 6000
devices, as shown in
Step 4, each time you
insert batteries.
• Make sure you press
the Connect buttons
on the keyboard and
mouse within 10 sec
after you press the
Connect button on the
RF Receiver.
Step 5: Test the keyboard and mouse
1
3
Figure 2-6: Activating the Creative keyboard and mouse
To install drivers, refer to "Installing Software" on page 3-1.
Move the mouse cursor or press a key on the keyboard to test that the keyboard and mouse are connected.
If nothing happens, repeat Step 4.
2
Installing Hardware 2-4
3
Installing Software
Installing Software
Installing Software
Windows 98 and 98 SE
users may be prompted by
an Add New Hardware
Wizard dialog box when
Windows detects a USB
device. Follow the
instructions on the screen.
You may need to insert the
Windows Installation CD
into the CD-ROM drive
during installation. Some
computers may be supplied
without the Windows CD,
but have the necessary files
stored in c:\windows\
options\cabs (replace c:\
with the drive letter your
Windows has been
installed on).
You need to install software to use Creative Desktop Wireless 6000. The following instructions are
applicable to Windows 98, Windows 98 Second Edition (SE), Windows Millennium Edition (Me),
Windows 2000 and Windows XP.
1. After you have connected Creative Desktop Wireless 6000, Windows will detect the USB device
and install the required drivers automatically.
2. Insert the Creative Desktop Wireless 6000 Installation CD into the CD-ROM drive. The CD
supports Windows Autoplay mode and starts running automatically. If the CD does not run
automatically, click Start -> Run. In the Run dialog box, type d:\ctrun\start.exe (replace d:\ with
your CD-ROM drive letter)
3. Select the applications to install, and then click the OK button.
4. Follow the instructions on the screen to install your Creative Desktop Wireless 6000.
5. When prompted, restart your computer.
For your USB keyboard to work with MS-DOS-based utilities and non-windows modes, your computer
must have USB Legacy Support (may vary depending on motherboard manufacturer) enabled in the
BIOS.
Installing Software 3-1
4
Using Creative Mouse And Keyboard
Software
Using Creative Mouse And Keyboard Software
Using Creative Mouse Software
Configuring the
mouse buttons
Some functions are
available in selected
Windows operating
systems only.
With the Creative Mouse software, you can preset the mouse buttons and mouse wheel to perform
specific functions, and configure the pointer.
1. Double-click the mouse icon on the Windows taskbar.
The Mouse Properties box appears.
2. Click the box that corresponds with the mouse button you want to change and select the function
you want. Table 1 below describes the functions available.
3. Click the Apply button, and then click the OK button.
Table 1: Highlighted functions
Function Description
BACK COMMAND
F
RONT COMMAND
LICKLOCK
C
R
ECALL WINDOW ❍ To restore a Windows application.
❍ To go back to the last page you viewed in your web
browser.
❍ After using the Back Command function, use the
Front Command function to go back to the page you
came from.
❍ To highlight or drag without holding down the
mouse button.
M
INIMISE ALL/UNDO
❍ To minimise all Windows applications or restore
them to their original size.
Using Creative Mouse And Keyboard Software 4-1
Configuring the
mouse wheel
With the mouse, you can
control either the scroll
speed or the volume, but
not both at the same time.
1. Double-click the mouse icon on the Windows taskbar.
The Mouse Properties box appears.
2. Click the Configure Mouse Wheel tab.
3. To adjust the wheel scroll speed with the mouse wheel, click the Wheel Scroll Speed option, if it is
not selected.
4. Click the Lines box to select the number of text lines to skip for each notch of the mouse wheel.
5. To control the volume of your speakers with the mouse wheel, click the Adjust Volume option.
6. To adjust the amount of volume change for each notch of the mouse wheel, drag the slider to adjust
the speed.
7. Click the Apply button, and then click the OK button.
Configuring the
pointer
Using Creative Keyboard Software
1. Double-click the mouse icon on the Windows taskbar.
The Mouse Properties box appears.
2. Click the Pointers tab to change a scheme or an image of your pointer.
3. Double-click the image you want to change. You can preview the image on the top-right corner of
the tab.
4. If you want to select a scheme, click the Scheme box, and click the Save As button.
5. Click the Apply button, and then click the OK button.
6. To adjust the motion of the pointer, click the Motion or Pointer Options tab.
7. Drag the top slider to adjust the pointer speed.
8. If you want to show the pointer trail, click the Show pointer trails check box to select it, and drag
the bottom slider to adjust the length of the trail.
9. Click the Apply button, and then click the OK button.
1. Double-click the keyboard icon on the Windows taskbar. A user interface showing the shortcut
keys on Creative Wireless Keyboard appears.
2. Place the cursor on the button you want to configure. If the button does not change colour, you
cannot configure it.
Using Creative Mouse And Keyboard Software 4-2
3. Click the button that can be configured.
A dialog box appears.
4. To change the application assigned to the button, click the change function option, and click the
down arrow to select another application. Click the OK button.
5. To select an application that is not listed in the above option, click the run program option.
6. Click the Browse button, locate the application you want, and click the Open button.
7. Click the OK button.
Tips On Using Your Keyboard and Mouse
The following are a few tips to help you to work effectively with minimal physical discomfort:
• When using the keyboard and mouse, keep your forearms, wrists and hands in a relaxed position,
with your elbows at your side.
• Position the keyboard and mouse nearby so that you do not have to stretch.
• Do not strike the keys too hard. Type with a soft touch.
• Keep your thighs parallel to the ground, and your feet flat on the ground or on a footrest.
• Use a chair that offers you good back support.
• Take a break every half an hour.
• Place your computer’s monitor away from sunlight glare.
• Vary your tasks throughout the day.
• Keep your wrists straight and if necessary use the foldable palm rest provided.
Using Creative Mouse And Keyboard Software 4-3
A
Technical Specifications
Technical Specifications
Creative Wireless Optical Mouse
Dimensions ❑ 125 mm (L) x 64 mm (W) x 37 mm (H)
Wei gh t ❑ 140 g
Operating
temperature
Humidity ❑ 0% - 90% RH
Working distance ❑ Up to 1.8 m (6 feet)
Power ❑ 2 x AA batteries
Standby mode
current
Transmitting angle ❑ 360º
Resolution ❑ 800 dpi
Radio Frequency ❑ Single channel 27 MHz with 256 IDs
❑ 0ºc - 40ºc
❑ 15 mA ± 10% at 3V
Technical Specifications A-1
Creative Wireless Keyboard
Dimensions ❑ 465 mm (L) x 200 mm (W) x 37 mm (H)
Wei gh t ❑ 760 g
Operating
❑ 0ºc - 40ºc
temperature
Humidity ❑ 10% - 85% RH
Working distance ❑ Up to 1.8 m (6 feet)
Power ❑ 2 x AA batteries
Sleeping mode
❑ 0.10 mA +/- 10% at 3V
current
Customisable hot
❑ 10 keys on keyboard (excluding the sleep mode and audio keys)
keys
Radio Frequency ❑ Single channel 27 MHz with 256 IDs
Technical Specifications A-2
Creative RF Receiver
Dimensions ❑ 81 mm (L) x 67.5 mm (W) x 23 mm (H)
Wei gh t ❑ 66.0 g
Operating
❑ 0ºc - 40ºc
temperature
Humidity ❑ 0% - 90% RH
Working distance ❑ Up to 1.8 m (6 feet)
LED indicators ❑ Communication
❑ Num Lock
❑ Caps Lock
❑ Scroll Lock
Technical Specifications A-3
B
Troubleshooting
Troubleshooting
If you have a technical problem with this product, you may wish to consult our self-help tool
“Knowledgebase” for online troubleshooting and solutions. Go to www.creative.com and select your
region.
Problems Installing Software
The installation does not start automatically after the installation CD is inserted.
The AutoPlay feature in your Windows system may not be enabled.
To start the installation program through the My Computer shortcut menu:
1. Double-click the My Computer icon on your Windows desktop.
2. In the My Computer window, right-click the CD-ROM drive icon.
3. On the shortcut menu, click AutoPlay and follow the instructions on the screen.
To install the software from the CD without enabling AutoPlay:
1. Leave the installation CD in the CD-ROM drive.
2. Click Start -> Run.
3. In the Run dialog box, type d:\setup.exe (replace d:\ with the drive letter of your CD-ROM drive).
4. Click the OK button.
5. Follow the instructions on the screen to complete the installation.
To enable AutoPlay through Auto Insert Notification:
1. Click Start -> Settings -> Control Panel.
2. In the Control Panel window, double-click the System icon.
3. In the System Properties dialog box, click the Device Manager tab and select your CD-ROM
drive.
4. Click the Properties button.
5. In the Properties dialog box, click the Settings tab and select Auto Insert Notification.
6. Click the OK button to exit from the dialog box.
Troubleshooting B-1
Problems With Your Creative Wireless Keyboard or Optical Mouse
The cursor does not move or its movements are erratic on the screen.
Do one or more of the following:
• Make sure that the batteries have been inserted properly and according to the directions shown in the
battery compartment.
• Make sure that the batteries are not discharged.
• Change the position of the Creative RF receiver. The RF receiver should be at least 8 inches (20 cm)
away from the computer or monitor.
After pressing the Suspend button, the computer does not wake up.
There may be a problem with your computer’s power management settings. Some systems are unable to
wake up after being placed in Suspend mode.
Do the following:
• Make sure that the power management settings for your operating system are correct, as described in
the Windows operating system’s online Help.
After changing the batteries, the keyboard and mouse do not work.
Do one or more of the following:
• Make sure that the batteries have been inserted properly and according to the directions shown in the
battery compartment.
• Make sure that the batteries are not discharged.
• Make sure that there is a connection between the RF receiver and keyboard or mouse. For more
information, refer to "Step 4: Activate the wireless desktop devices" on page 2-4.
The computer cannot detect the Creative keyboard or mouse.
Do one or more of the following:
• Make sure that the RF receiver is connected correctly to your computer.
• Make sure that the batteries have been inserted properly and according to the directions shown in the
battery compartment.
• Make sure that there is a connection between the RF receiver and keyboard or mouse. For more
information, refer to "Step 4: Activate the wireless desktop devices" on page 2-4.
Troubleshooting B-2
The cursor moves erratically and/or some characters appear on the screen when you are not using
the mouse or keyboard.
There may be some interference from other nearby computers. This may be due to similar radio
frequencies being used in some systems.
Do the following:
• Reactivate the wireless desktop devices to randomly select another radio frequency by repeating the
steps in "Step 4: Activate the wireless desktop devices" on page 2-4. For more information on the
radio frequency, refer to "Technical Specifications" on page A-1.
Troubleshooting B-3
Loading...